Get Starting and Driving -> Start&Stop System Guide for Fiat 500 C 2 Door Second Generation (2021-2025)

129) Before starting any servicing

NOTE The engine can only be stopped

automatically over about 10 km/h, to

prevent the engine from being

repeatedly stopped when driving at

walking pace.

START&STOP

SYSTEM

operation, stop the engine and remove the

key from the ignition switch to operate

the steering lock, particularly when the

wheels do not touch the ground. If this is

not possible (for example if the key needs

to be turned to MAR or the engine must be

running), remove the main fuse that

protects the electric power steering.

130) 131) 132) 133)

Stopping of the engine is indicated by

46)

the warning light or the symbol

the instrument panel switching on

(for versions/markets, where provided)

(on some versions, together with a

message on the display).

The Start&Stop system automatically

stops the engine each time the car

is stationary and starts it again when

the driver wants to move off.

Restarting the engine

With manual transmission: press the

clutch pedal.

In this way, the vehicle efficiency is

increased, by reducing consumption,

dangerous gas emissions and sound

pollution.

With Dualogic gearbox: if the gear lever

is in position N (Neutral), place it in

any other gear, otherwise release the

brake pedal or move the gear lever

to +, – or R (Reverse).

OPERATING MODE

Stopping the engine

MANUAL SYSTEM

ACTIVATION/

With manual transmission: with the car

stationary, the engine stops with the

transmission in neutral and the clutch

pedal released.

With Dualogic gearbox: the engine

stops if the car is at a standstill and the

brake pedal is pressed. This condition

can be maintained even if the brake

pedal is not depressed, if the gear lever

is in position N (Neutral).

DEACTIVATION

The system can be activated/

deactivated by pressing the button A

fig. 79 on the dashboard.

With the system off, the warning light or

the symbol

appear on the

instrument panel (with a message for

versions with colour display).

Start&Stop mode will be active

whenever the engine is started.

102

132) We recommend that you remove the

key from the ignition if other people remain

in the vehicle. Exit from the vehicle only

after having removed the ignition key

or having rotated it to the STOP position.

During refuelling, make sure that the engine

is off and that the ignition key is in the

STOP position.

SPEED LIMITER

(for versions/markets, where provided)

ACTIVATING THE DEVICE

To turn the device on, turn the ring C

fig. 80 to the

position.

133) For cars with Dualogic transmission, if

the engine is automatically stopped on a

slope, the engine should be restarted

by moving the gear lever to + or – without

releasing the brake pedal. For cars with

Dualogic transmission, where the Hill

Holder function is present, in the case of

car stopped on a slope, the engine does

not cut off automatically, so as to make the

Hill Holder function - which is active only

when the engine is running - available.

F0S0519

WARNING

130) If the battery needs to be replaced,

always contact a Fiat Dealership. Replace

the battery with one of the same type

(HEAVY DUTY) and with the same

specifications.

F0S0624

WARNING

When the device is enabled, it is

indicated by the symbol being

shown on the display along with the

last speed set.

131) Before opening the bonnet, make

sure that the vehicle is switched off and the

key is in the STOP position. Please follow

the instructions on the decal near the front

crossmember. It is advisable to extract

the key when there are other people in the

car. The car should always be left after

the key has been removed or turned to the

STOP position. When refuelling, make

sure that the car is switched off with the

key in the STOP position.

46) If the climate comfort is to be favoured,

the Start&Stop system can be deactivated,

for a continuous operation of the climate

control system.

SPEED LIMIT

PROGRAMMING

The minimum speed that can be set is

30 km/h.

Turn on the speed limiter by turning the

ring C to the

position.

The speed limit can be programmed

without necessarily activating the

device.

103

Starting and Driving -> Start&Stop System for Your Fiat 500 C 2 Door Second Generation (2021-2025)

Related Topics

Starting and Driving

Popular Owner Manuals

Latest Owner Manuals