Get Maintaining Your Vehicle -> Bulb Replacement Guide for Fiat 500 SUV First Generation (2007-2019)

322 MAINTAINING YOUR VEHICLE

Bulb Number

W5W

Center High Mounted Stop Lamp

License Plate Lamps

LED (See Authorized dealer)

NOTE: Numbers refer to commercial bulb types that can be purchased from your authorized dealer.

If a bulb needs to be replaced, visit your authorized dealer or refer to the applicable Service Manual.

BULB REPLACEMENT

Interior Bulbs

Headlamps Low Beam And High Beam

1. Remove the plastic cap from the back of the head-

lamp housing.

Rear Cargo Lamp

2. Rotate the bulb counter-clockwise.

3. Remove the bulb and replace as needed.

4. Install the bulb and rotate clockwise to lock in place.

5. Reinstall the plastic cap.

1. Using a suitable tool open the light box.

2. Pull the bulb out.

3. Replace the bulb, and reinstall the light box cover.

Exterior Bulbs

Front Turn Signal, Parking And Daytime

Running Lamps

NOTE: Lens fogging can occur under certain atmo-

spheric conditions. This will usually clear as atmo-

spheric conditions change to allow the condensation to

change back into a vapor. Turning the lamps on will

usually accelerate the clearing process.

1. Turn the steering wheel completely to the left or

right.

2. Open the wheel housing access door.

MAINTAINING YOUR VEHICLE 323

Front Fog Lamps

To replace the front fog lights, see your authorized

dealer.

Front/Rear Side Marker Lamps

1. Remove portion of the wheel liner to allow hand

access to side marker lamp.

2. Rotate the bulb socket counterclockwise, and remove

the bulb and socket assembly from the housing.

3. Pull the bulb from the socket and insert the replace-

ment bulb.

7

Wheel Housing Access Door

3. Remove the plastic cap from the back of the lamp

housing.

4. Install the bulb and socket assembly into the hous-

ing, and rotate the socket clockwise to lock it in place.

4. Rotate bulb/socket counter-clockwise.

5. Remove the bulb and replace as needed.

5. Reinstall the wheel liner.

6. Install the bulb into socket, and rotate bulb/socket

clockwise into lamp locking it in place.

7. Reinstall the plastic cap.

324 MAINTAINING YOUR VEHICLE

Rear Tail, Stop, Backup And Turn Signal Lamps

5. Remove the backup lamp bulb by pulling straight

out.

1. Open the liftgate.

6. Replace lamps as required and reinstall lamp.

2. Remove the two screws and remove the tail lamp

assembly.

Center High Mounted Stop Lamp (CHMSL)

1. Remove the two guard caps and the two fastening

screws.

2. Remove the center high mounted stop lamp assem-

bly.

3. Disconnect the electric connector.

4. Press the retaining device and open the bulb holder.

5. Remove the snap-fitted bulb to be replaced and

replace it.

6. Close the back cap locking it properly.

Tail Lamp Assembly Screws

7. Reinstall the two fastening screws and reinstall the

guard caps.

3. Remove four screws and separate the backplate from

the lamp housing.

4. Remove the tail, stop, or turn signal bulbs by push-

ing them slightly and turning counter-clockwise.

MAINTAINING YOUR VEHICLE 325

FLUID CAPACITIES

U.S.

Metric

Fuel (Approximate)

Engine Oil with Filter

1.4L Engine

10.5 Gallons

40 Liters

4 Quarts

3.8 Liters

4.4 Liters

Cooling System

1.4L Engine (Mopar Antifreeze/

Engine Coolant 10 Year/

150,000 Mile Formula) — with

Manual Transmission

4.6 Quarts

7

1.4L Engine (Mopar Antifreeze/

Engine Coolant 10 Year/

5.8 Quarts

5.5 Liters

150,000 Mile Formula) — with

Automatic Transmission

Maintaining Your Vehicle -> Bulb Replacement for Your Fiat 500 SUV First Generation (2007-2019)

Related Topics

Maintaining Your Vehicle

Popular Owner Manuals

Latest Owner Manuals