Advertisement

Advertisement

Maintaining Your Vehicle -> Fluids, Lubricants, And Genuine Parts for Your Fiat 500 SUV First Generation (2007-2019)

326 MAINTAINING YOUR VEHICLE  
FLUIDS, LUBRICANTS, AND GENUINE PARTS  
Engine  
Component  
Fluid, Lubricant, or Genuine Part  
Engine Coolant – 1.4L Engine  
We recommend you use Mopar Antifreeze/Coolant 10  
Year/150,000 Mile Formula OAT (Organic Additive  
Technology) meeting the requirements of FCA Material  
Standard MS.90032.  
Engine Oil – 1.4L Engine  
We recommend you use API Certified SAE 5W-30  
Engine Oil, meeting the requirements of FCA Material  
Standard MS-6395. Refer to your engine oil filler cap for  
correct SAE grade.  
Engine Oil Filter – 1.4L Engine  
Spark Plugs – 1.4L Engine  
Fuel Selection – 1.4L Engine  
We recommend you use a Mopar Engine Oil Filter.  
We recommend you use Mopar Spark Plugs.  
91 Octane Recommended – 87 Octane Acceptable,  
0-15% Ethanol.  
MAINTAINING YOUR VEHICLE 327  
CAUTION!  
CAUTION! (Continued)  
need to be drained, flushed, and refilled with  
fresh OAT coolant (conforming to MS.90032), by  
an authorized dealer as soon as possible.  
Do not use water alone or alcohol-based engine  
coolant (antifreeze) products. Do not use addi-  
tional rust inhibitors or antirust products, as they  
may not be compatible with the radiator engine  
coolant and may plug the radiator.  
This vehicle has not been designed for use with  
propylene glycol-based engine coolant (anti-  
freeze). Use of propylene glycol-based engine  
coolant (antifreeze) is not recommended.  
Mixing of engine coolant (antifreeze) other than  
specified Organic Additive Technology (OAT)  
engine coolant (antifreeze), may result in engine  
damage and may decrease corrosion protection.  
Organic Additive Technology (OAT) engine cool-  
ant is different and should not be mixed with  
Hybrid Organic Additive Technology (HOAT)  
engine coolant (antifreeze) or any “globally com-  
patible” coolant (antifreeze). If a non-OAT engine  
coolant (antifreeze) is introduced into the cooling  
system in an emergency, the cooling system will  
7
(Continued)  
328 MAINTAINING YOUR VEHICLE  
Chassis  
Component  
Fluid, Lubricant, or Genuine Part  
Manual Transmission – If Equipped  
We recommend you use Mopar C635 DDCT/MTX  
Transmission Fluid.  
Automatic Transmission – If Equipped  
Brake Master Cylinder  
Use only Mopar AW-1 Automatic Transmission Fluid or  
equivalent. Failure to use the correct fluid may affect the  
function or performance of your transmission.  
We recommend you use Mopar DOT 3, SAE J1703  
should be used. If DOT 3, SAE J1703 brake fluid is not  
available, then DOT 4 is acceptable.  
Convertible Top Rails – If Equipped  
We recommend you use Berulub FR 43.