STARTING AND DRIVING -> ECO Function for Your Fiat Panda SUV Fourth Generation (2024-2026)

auxiliary battery and the traditional lead  
battery. When the accelerator pedal  
is released with the gear is engaged,  
the BSG acts as an engine brake (e-  
COASTING function). This contribution  
is increased by pressing the brake  
pedal at the same time (e-BRAKING  
function). The recovered energy is  
made available later, helping to save  
fuel.  
ECO FUNCTION  
HYBRID SYSTEM  
(for versions/markets, where provided)  
To activate the function press the ECO  
button fig. 117.  
Your car is provided with a hybrid  
system, which uses an electric motor  
that is mechanically coupled to the  
thermal engine (via a dedicated belt)  
and powered by an auxiliary lithium  
battery (12 V). The electric motor  
contributes to driving the car forward  
together with the heat engine when  
there is a certain acceleration request,  
and charges the lithium battery when  
the car decelerates.  
NOTE If the conventional battery is  
flat, there is no energy recovery to  
the auxiliary battery, and so the Trip  
Computer "Energy Flows" screen on  
the instrument panel (for versions with  
colour display only) does not display  
the relative recharging flows.  
117  
F1D0140  
When the ECO function is active,  
the vehicle is set for a driving style  
characterised by reduced fuel  
consumption. When the function is  
active, the corresponding LED on the  
button switches on.  
The hybrid system uses a BSG (Belt  
Starter Generator) electric motor  
working both as a generator (alternator)  
and as a starter motor.  
ACCELERATION ASSIST  
FUNCTION ("e-ASSIST"  
function)  
In general, during pickup from low  
engine speeds, the hybrid system  
shares the torque between the electric  
motor and thermal engine when  
necessary, thereby reducing the output  
power of the thermal engine in order to  
optimise consumption.  
NOTE The system does not operate  
continuously, but is activated according  
to the car status, driving conditions  
(acceleration, braking, deceleration  
and starting) and road conditions (e.g.  
gradient).  
The function is automatically  
reactivated at every start. Press the  
ECO button again to deactivate the  
function and restore the normal driving  
setting.  
ENERGY RECOVERY  
DURING DECELERATION  
("e-COASTING"/"e-BRAKING"  
functions)  
HEAT ENGINE RESTART  
BY START&STOP  
("EXTENDED S&S"  
FUNCTION)  
During deceleration with a gear  
engaged, the BSG (Belt Starter  
Generator) recharges the lithium  
The new system automatically switches  
the thermal engine on and off using  
111