Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

DASHBOARD AND CONTROLS -> SOUND SYSTEM for Your Fiat Punto SUV 1999-2010

SOUND SYSTEM SET-UP (where provided)  
SOUND SYSTEM  
(where provided)  
The system consists of: sound system power wires,  
front and rear speaker power wires, aerial and  
respective power wire four front door speakers (2  
tweeters and 2 woofers) two rear full-range speakers.  
Large oddment compartments in the dashboard and  
doors which make the passenger compartment even  
more comfortable can be fond in cars not equipped  
with a sound system set-up.  
Speakers  
A specific kit can be found in the Lineaccessori Fiat  
range for a “Sound system set-up” in the car.  
n. two tweeters, 40W max power each;  
n. two front woofers, 165 mm diameter, 40W max  
As concerns sound systems consisting of radio with  
tapes player or Compact Disc/MP3 CD player (where  
provided), see the Supplement annexed to this Owner  
Handbook.  
power each;  
n. two rear full-range speakers, 100 mm diameter,  
30W max power each;  
120  
Downloaded from www.Manualslib.com manuals search engine  
Sound system installation  
Replace the compartment shown in the figure with the plate provided  
with the optional “Sound system set-up” in the boot to install the sound  
system.  
To remove the compartment which is clipped into place, insert your  
hand in the compartment, press downwards and pull it out towards the  
inside of the car. Fit the compartment provided by clipping it into place.  
Then locate the electrical connection power wires.  
F0I0193m  
121  
Downloaded from www.Manualslib.com manuals search engine  
Wiring diagram and  
additional branches  
A. Fuse box  
B. Tweeter on front left-hand  
door  
C. Tweeter on front right-hand  
door  
D. Woofer on front left-hand  
door  
E. Woofer on front right-hand  
door  
F. Radio  
G. Rear left-hand full-range  
speaker  
H. Rear left-hand full-left  
speaker  
I. Aerial  
F0I0033m  
L. Connection on front left-hand  
door  
Wire colour coding:  
B = White  
BN = White/Black  
CN = Orange/Black  
CV = Orange/Green  
NZ = Black/Purple  
RN = Red/Black  
M. Connection on front right-  
hand door  
N = Black  
R = Red  
AG = Light blue/Yellow  
AR = Light blue/Red  
SN = Pink/Black  
122  
Downloaded from www.Manualslib.com manuals search engine