Get DASHBOARD AND CONTROLS -> RECONFIGURABLE MULTIFUNCTION DISPLAY Guide for Fiat Punto SUV 1999-2010

RECONFIGURABLE MULTIFUNCTION

DISPLAY (where provided)

The “Multifunction display” shows all the useful information necessary

when driving, more particularly:

INFORMATION ON STANDARD SCREEN

❒ Date (A).

F0I1000g

❒ Total odometer (B).

❒ Clock (C).

❒ External temperature (D).

❒ Speedgear or Dualogic info display (where provided) (F).

With ignition key removed and front doors closed the display is off.

With ignition key removed, when opening one of the front doors the

display comes on showing the clock and the odometer indication.

If the “Follow me home” function is on (see paragraph “Follow me

home” in this section), the display will show the time the function is on

(see section “Warning lights and messages”).

F0I1001g

INFORMATION ABOUT CAR CONDITIONS (at event)

❒ Scheduled maintenance programme intervals.

❒ Trip computer information.

❒ Light adjustment of graphics/index/instrument cluster display and two-

zone climate control system (where provided).

❒ Display of failure/warning/function activation messages.

28

Downloaded from www.Manualslib.com manuals search engine

❒ Headlight aiming position display (with dipped beam

❒ SET DATE

headlights on) (E).

❒ AUDIO REPETITION (where provided) (●)

❒ SPEEDLOCK (where provided)

❒ DISTANCE UNIT

❒ Repetition of audio info.

There is also a menu enabling to perform the following

adjustments and/or settings using the control buttons

(see previous pages):

❒ CONSUMPTION UNIT

❒ TEMPERATURE UNIT

❒ LANGUAGE

SET-UP MENU

The number of items in the menu depends on the car

settings.

❒ BUZZER VOLUME

❒ BUTTON VOLUME

❒ SERVICE

When travelling, only the “Speed limit” indication is

enabled.

The “Set-up Menu” enables to perform the following

adjustments and/or settings using the control buttons

(see previous pages):

❒ EXIT MENU

(●) “Audio Rpt.” menu item is present only if the car

is fitted, as standard, with sound system.

❒ SPEED LIMIT

❒ TRIP B ON/OFF

❒ SET CLOCK

❒ CLOCK MODE

29

Downloaded from www.Manualslib.com manuals search engine

INITIAL CHECK

Turning the ignition key to MAR, the multifunction display shows the message “Check active”: the diagnostic phase

of all the electronic systems on the car has started. This lasts few seconds: if no faults are detected, when the engine

has started, the display shows the “Check OK” message. See section “Warning lights and messages” if faults are

found.

If the display shows a failure message,

see details in section “Warning lights

and messages”.

Is the engine

started?

YES

If no failures are

present

NO

or

Standard

screen display

The “Service schedule” includes vehicle maintenance every 20,000 km (or 12,000 mi) or every year; this is shown automatically, with the igni-

tion key at MAR, starting from 2,000 km (or 1,240 miles) or 30 days from this deadline and it is shown again every 200 km (or 124 mi) or 3

days. For 1.3 Multijet versions, see “Care and Maintenance” in section “Service schedule to change engine oil and filter and air cleaner. Below

200 km service indications are proposed at shorter intervals. Below 200 km service indications are proposed at shorter intervals. Service in-

tervals will be displayed in km or mi according to the unit set. When a programmed maintenance interval (coupon) is near to come, turning

the ignition key to MAR, will display the message “Service” followed by the number of km, or days to go before car servicing. “Scheduled ser-

vicing” message is displayed in km, miles or days according to the approaching service interval. Contact a Fiat Dealership to carry out any ser-

vice operation provided by the “Service schedule” or “Annual inspection plan”, and to reset the display.

30

Downloaded from www.Manualslib.com manuals search engine

MENU DESCRIPTION

The menu comprises a series of functions arranged in a “circular fashion” which can be selected through buttons +

and - for access to the different select operations and settings (see examples “Lang.” and “Date adjustm.” below); for

further details, also refer to “Access to menu screen” on next page.

Deutsch

Day

English

Español

Italiano

Example:

Year

Month

Nederlan

Français

Português

TRIP B

CLOCK ADJUST.

CLOCK MODE

SPEED LIM.

Q

Example:

EXIT MENU

Q

DATE ADJUSTM.

SERVICE

AUDIO RPT.

KEYS VOLUME

DOOR LOCK

BUZZER VOL

DIST. UNIT

LANG. ENGLISH

CONSUMP.

TEMP. UNIT

31

Downloaded from www.Manualslib.com manuals search engine

ACCESS TO MENU SCREEN

After the “Initial check”, it is possible to access the menu screen pressing the button

To surf the menu press buttons + or –.

.

Q

IMPORTANT If after entering the menu no setting/adjustment is performed within 60 seconds, the system exits the

menu automatically and returns to previously displayed screen. In this case the last selected but not confirmed

^{setting (through button}Q^{) is not stored and therefore the operation shall be repeated (this stands valid also when}

^{quitting the Menu by pressing the}R ^button).

When the car is running, it is possible to access only the reduced menu (for setting “Speed limit”).

When the car is stationary access to the whole menu is enabled.

The following diagram shows the cases described.

32

Downloaded from www.Manualslib.com manuals search engine

See

“Initial check”

NO

Is the car

moving?

Q

Speed Lim.

Trip B

Example of standard

screen

Clock Adjust.

Clock Mode

Date Adjustm.

Audio Rpt.

Door Lock

Dist. Unit

Consump

Temp. Unit

Lang.

YES

Speed Lim.

Exit Menu

Reduced menu screen

Buzzer Vol

Keys Volume

Service

Exit menu

Extended menu screen

33

Downloaded from www.Manualslib.com manuals search engine

SPEED LIMIT (Speed Lim.)

With this function it is possible to set the car speed limit which, if exceeded, automatically sounds a buzzer and

makes the warning light

è

with the special message on the display (see “Warning lights and messages” section) come

on to alert the driver. To set the speed limit, proceed as follows:

See “Initial check”

and “Access to

menu screen”

R

Return to previously

displayed

+

–

screen, e.g.:

Q

R

Menu screen

+

–

Use buttons +/– to select ON/OFF.

Set selection flashes.

Return to menu

screen

Return to menu

screen

Q

R

Q

R

Use buttons +/- to set the speed required (during the setting ope-

ration the value flashes on the screen). The possible setting is

between 30 and 250 km/h or between 20 and 155 mph depending-

on the unit set previously (see “Distance Unit” paragraph

described later). Every press (pulse) of the button +/–

increases or decreases by five units. Keeping button +/– pressed

obtains the automatic fast increase or decrease. When you are

near the required setting, complete adjustment with single pres-

ses.

Q

34

Downloaded from www.Manualslib.com manuals search engine

TRIP B ON/OFF (Trip B)

Through this option it is possible to activate (ON) or deactivate (OFF) the Trip B (partial trip) which show “partial

mission” information corresponding to: Trip Dist. B, Avg. Consump. B, Avg. Speed B, Time B. For further

information see “General trip - Trip B”.

See “Initial check”

and “Access to

menu screen”

Return to previously

displayed

screen, e.g.:

R

Q

+

–

Menu screen

R

Return to menu screen

+

–

Use buttons +/– to select ON/OFF.

Set selection flashes.

Q

R

35

Downloaded from www.Manualslib.com manuals search engine

SET CLOCK (Clock Adjust.)

During setting, the clock is displayed in 24h mode regardless of the set clock mode (12h/24h).

To set the clock (hours - minutes) proceed as follows:

See “Initial check”

and “Access to

menu screen”

Return to previously

displayed

Return to previously

displayed

screen, e.g.:

R

Q

+

–

Menu screen

R

Q

R

+

–

R

Q

+

–

Return to menu

screen

Every press (pulse) on button +/– increases or decreases

by one unit. Keeping button +/– pressed obtains automatic

fast increase or decrease. When you are near the required

setting, complete adjustment with single presses.

36

Downloaded from www.Manualslib.com manuals search engine

CLOCK MODE (Clock Mode)

This function is used to set the clock in the 12h (12 hour) or 24h (24 hour) mode. To adjust proceed as follows:

See “Initial check”

Return to previously

and “Access to

displayed

menu screen”

screen, e.g.:

R

+

–

Q

Menu screen

R

Return to menu screen

Use buttons +/– to select 12 h or

24 h mode.

Set selection flashes.

+

–

Q

R

Q

R

37

Downloaded from www.Manualslib.com manuals search engine

SET DATE (Date Adjustm.)

To correct the date (year - month - day ) proceed as follows:

See “Initial check”

and “Access to

menu screen”

Return to previously

displayed

Return to previously

displayed

screen, e.g.:

R

Q

+

–

Menu screen

R

Q

+

–

R

Q

+

–

R

Q

+

–

Every press (pulse) on button +/– increases or decreases

by one unit. Keeping button +/– pressed obtains

automatic fast increase or decrease. When you are near

the required setting, complete adjustment with single

presses.

Return to menu screen

38

Downloaded from www.Manualslib.com manuals search engine

AUDIO REPETITION (Audio Rpt.) (where provided)

With this function the display repeats information relevant to the Radio (selected radio station frequency or RDS

message, automatic tuning or AutoSTore), audio CD (track number), MP3 CD (track number), CD Changer (CD

number and track), and Tape (operating mode).

See “Initial check”

and “Access to

menu screen”

Return to previously

displayed screen, e.g.:

R

Q

+

–

Menu screen

R

Return to menu

screen

Return to menu screen

+

–

Use buttons +/– to select ON/OFF.

Set selection flashes

Q

R

Q

R

Example of audio

repetition

39

Downloaded from www.Manualslib.com manuals search engine

SPEEDLOCK (Door Lock) (where provided)

This function:

❒ when activated (ON) locks automatically the doors when the car speed exceeds 20 km/h;

❒ when deactivated (OFF) doesn’t perform automatic door lock when the car speed exceeds 20 km/h

See “Initial check”

and “Access to

menu screen”

Return to previously

displayed

screen, e.g.:

R

Q

+

–

Menu screen

R

Return to menu screen

+

–

Use buttons +/– to select ON/OFF.

Set selection flashes.

Q

R

Q

R

40

Downloaded from www.Manualslib.com manuals search engine

“DISTANCE UNIT” (Dist. Unit)

The display gives information according to the set unit (km or mi). To select the required distance units, proceed

as follows:

See “Initial check”

and “Access to

menu screen”

Return to previously

displayed

screen, e.g.:

R

Q

+

–

Menu screen

R

Return to menu screen

Use buttons +/– to set the required

distance units (km or mi).

Set selection flashes.

+

–

Q

R

Q

R

41

Downloaded from www.Manualslib.com manuals search engine

“CONSUMPTION UNIT” (Consump.)

This function enables to select the unit of measure for fuel consumption (km/l, l/100 km or mpg) according to the

previously set distance unit (km or mi, see previous paragraph “Distance unit”). To set this function proceed as

follows:

Menu screen

See “Initial check”

and “Access to

menu screen”

R

Q

+

–

Return to

previously displayed

screen, e.g.:

If setting km

R

Return to menu

screen

Return to menu

screen

Use buttons +/– to set the

fuel consumption unit km/l or l/100km.

Set selection flashes

+

–

Q

R

Q

R

Q

If setting mi

R

42

Downloaded from www.Manualslib.com manuals search engine

“TEMPERATURE UNIT” (Temp. Unit)

To select temperature unit (°C or °F), proceed as follows:

See “Initial check”

and “Access to

menu screen”

Return to previously

displayed

screen, e.g.:

R

+

–

Q

Menu screen

R

Return to menu screen

Use buttons +/– to select

the required temperature unit (°C or °F).

Set selection flashes.

+

–

Q

R

Q

R

43

Downloaded from www.Manualslib.com manuals search engine

LANGUAGE (Lang.)

Display messages can be shown in different languages (Italian, Dutch, English, Spanish, French, Portuguese, German).

To select the required language proceed as follows:

Return to previously

displayed

screen, e.g.:

See “Initial check”

and “Access to

menu screen”

R

Q

+

–

Menu screen

R

–

Q

–

Return to menu

screen

44

Downloaded from www.Manualslib.com manuals search engine

BUZZER VOLUME (Buzzer Vol)

The volume of the buzzer accompanying any failure/warning indication can be adjusted according to 8 levels. The

buzzer can be adjusted and, in certain cases, it cannot be excluded. To adjust the volume proceed as follows:

See “Initial check”

Return to previously

and “Access to

displayed

menu screen”

screen, e.g.:

R

+

–

Q

Menu screen

R

Return to menu screen

Use buttons +/– to adjust

the buzzer volume.

Set selection flashes.

+

–

Q

R

Q

R

45

Downloaded from www.Manualslib.com manuals search engine

BUTTON VOLUME (Keys Volume)

The volume of the roger-beep accompanying the activation of certain buttons can be adjusted according to 8 levels.

The roger-beep can be adjusted and excluded. To adjust the volume proceed as follows:

See “Initial check”

and “Access to

menu screen”

Return to previously

displayed

screen, e.g.:

R

Q

+

–

Menu screen

R

Return to menu screen

Use buttons +/– to adjust

the roger-beep volume.

Set selection flashes.

+

–

Q

R

Q

R

46

Downloaded from www.Manualslib.com manuals search engine

SERVICE (Service)

Through the “Service” function it is possible to receive information connected with correct vehicle maintenance.

See “Initial check”

and “Access to

menu screen”

Return to previously

displayed

screen, e.g.:

R

Q

+

–

or

Menu screen

R

Return to previously

displayed

screen, e.g.:

Return to menu

screen

Use buttons + or – to select displaying

in km/days or mi/days according to the

“unit” set.

+

–

Return to menu

screen

R

Q

R

Q

continues

on next

page

47

Downloaded from www.Manualslib.com manuals search engine

Return to menu

screen

Q

continues

from

R

Return to previously

displayed

screen, e.g.:

R

Q

Return to menu

screen

The “Service schedule” includes vehicle maintenance every 20,000 km (or 12,000 mi) or every year; this is shown automatically, with the igni-

tion key at MAR, starting from 2,000 km (or 1,240 miles) or 30 days from this deadline and it is shown again every 200 km (or 124 mi) or 3

days. For 1.3 Multijet versions, see “Car Maintenance” in section “Service schedule to change engine oil and filter and air cleaner. Below 200

km service indications are proposed at shorter intervals. Service intervals will be displayed in km or mi according to the unit set. When a pro-

grammed maintenance interval (coupon) is near to come, turning the ignition key to MAR, will display the message “Service” followed by the

number of km, or days to go before car servicing. “Scheduled servicing” message is displayed in km, miles or days according to the approa-

ching service interval. Contact a Fiat Dealership to carry out any service operation provided by the “Service schedule” or “Annual inspection

plan”, and to reset the display.

48

Downloaded from www.Manualslib.com manuals search engine

EXIT MENU (Exit Menu)

This is the last function that closes the circular setting cycle listed in the initial menu screen.

Return to previously

displayed

screen, e.g.:

Menu screen

See “Initial check”

+

and “Access to

R

menu screen”

–

Use button – to return to Speed Lim.

screen (first Menu item).

49

Downloaded from www.Manualslib.com manuals search engine

TRIP COMPUTER

The “Trip computer” displays information relating to the operating status of the car. This function comprises the

“General trip”, concerning the complete mission of the car and “Trip B”, concerning the partial car mission. This

function (as shown in the graph below) is contained within the complete mission. Both functions are resettable.

The “General trip” displays the figures relating to Range, Distance, Aver. Consumpt., Curr. consumpt., Avg. speed,

Traveltime. “Trip B” displays information concerning Distance B, Aver. Consump. B, Avg. speed B, Traveltime B

(driving time). The “Trip B” function can be excluded. Value selected will be displayed until new information is

requested.

Start of journey procedure (reset)

To start a new journey monitored by the “General trip”, with the key to MAR, press button

on right steering

{

column stalk with mode

(see “Control buttons”).

&

Reset GENERAL TRIP

End of complete mission - Start of new mission

Reset General Trip

End of complete mission - Start of new mission

GENERAL TRIP

Reset TRIP B

TRIP B

Reset TRIP B

TRIP B

Reset TRIP B

End of partial mission

Start of new partial mission

TRIP B

End of partial mission

Start of new partial mission

Reset TRIP B

End of partial mission

Start of new partial mission

End of partial mission

Start of new partial mission

The reset operation in the presence of the screens concerning the “General trip” makes it possible to reset also the

“Trip B”. The reset operation in the presence of the screens concerning only the “Trip B” makes it possible to reset

only the information associated with this function.

IMPORTANT The “Range” information cannot be reset.

50

Downloaded from www.Manualslib.com manuals search engine

“Trip computer” information are displayed according to the following diagram:

See “Initial check” and

“Access to menu screen”

%

Previously displayed

screen, e.g.:

(*)

continued from previous page

%

(*)

The two screens concerning a trip item

alternate three times, then the second

one stays on fixed on the display.

= “Reset General trip” and “Trip B” excluding

“Range to empty” (see paragraph “Reset General trip”).

&

51

Downloaded from www.Manualslib.com manuals search engine

Return to previously

displayed screen, e.g.:

continued from previous page

NO

Trip B ON?

YES

%

(*)

= “Reset Trip B”

(see paragraph “Reset Trip B”).

&

52

Downloaded from www.Manualslib.com manuals search engine

After resetting “Trip” by pressing the button with

mode, the following functions are displayed:

&

Reset GENERAL TRIP

= “Reset General trip” and “Trip B”

(excluding “Range to empty”).

&

Reset TRIP B

= “Reset Trip B”

&

53

Downloaded from www.Manualslib.com manuals search engine

Range to empty = shows the distance in km (or

miles) that the car can still cover before needing fuel,

assuming that driving conditions are kept unvaried.

The display will show “- - - -” in the following cases:

Trip time = time elapsed from the start of the new

mission (*).

(*) New mission = starts from last reset:

– “manual” reset is performed by the driver by

pressing the relevant button (see paragraph

“Control buttons”)

❒ range lower than 50 km. In this event “- - - -” are

preceded by message “Warning Limited Range” (this

message will be displayed even if not in Trip

Computer mode);

– “automatic” reset is performed when the Distance

travelled reaches 9999.9 km or when Trip Time

reaches 99:59 (99 hours and 59 minutes)

❒ car parked with engine running for long time; when

restarting range indication will be displayed again.

– after reconnecting the battery.

Distance travelled = shows the km (or miles)

covered from the start of the new mission (*).

IMPORTANT Lacking information, Trip computer

values are displayed with “- - - -”. When restoring

normal operating conditions after a failure, calculation

will restart regularly without resetting either previous

displayed values or the start of a new mission (*).

Average consumption = shows the average

consumption calculated from the start of the new

mission (*); this value can be expressed in km/l or

l/100 km or in mpg.

IMPORTANT After disconnecting/reconnecting the

battery, certain displayed values will be equal to

“- - - -” until significant data for recalculation are

available.

Instant consumption = shows fuel consumption

variation, this value is updated constantly. If the car is

parked with engine running the display will show “- - -

-“. When restarting the car, the instant consumption

indication will be displayed again.

Average speed = shows the average speed of the

car in relation with total time elapsed from the start of

the new mission (*).

54

Downloaded from www.Manualslib.com manuals search engine

INSTRUMENT PANEL, DISPLAY AND BUTTON LIGHTING ADJUSTMENT

(LIGHT RHEOSTAT)

With this function it is possible to adjust the lighting (dimming/brightening) of the instrument cluster, and two-zone

climate control display (where required).

To adjust proceed as follows:

Use buttons +/– to carry out required

light adjustment.

Previously

displayed

screen, e.g.:

See “Initial check”

and “Access to

menu screen”

+

–

+

–

Automatic return to standard screen

after few seconds or by

^{pressing button}Q

F0I0243m

55

Downloaded from www.Manualslib.com manuals search engine

Download User Manual App

DASHBOARD AND CONTROLS -> RECONFIGURABLE MULTIFUNCTION DISPLAY for Your Fiat Punto SUV 1999-2010

Related Topics

DASHBOARD AND CONTROLS

Popular Owner Manuals

Latest Owner Manuals