TO MEMORISE SPEED
TO RESET THE MEMORISED SPEED
Proceed as follows:
If the device has been disengaged for example pressing
the brake or clutch pedal, the memorised speed can
be reset as follows:
❒ turn the knurled ring (A) to ON and press the
accelerator pedal to the required speed;
❒ accelerate gradually until reaching a speed
❒ turn the knurled ring (B) to (+) for at least three
seconds, then release it. The car speed is
memorised and it is therefore possible to release
the accelerator pedal.
approaching the one memorised;
❒ engage the gear selected at the time of speed
memorising (4th or 5th or 6th gear);
In the case of need (when overtaking for instance)
acceleration is possible simply pressing the accelerator
pedal; later, releasing the accelerator pedal, the car
will return to the speed memorised previously.
❒ press the RES button (C).
TO INCREASE THE MEMORISED SPEED
The speed memorised can be increased in two ways:
❒ pressing the accelerator and then memorising the
new speed reached;
or
❒ momentaneously turning the ring (B) to (+).
Each pulse of the ring will correspond to a slight
increase in speed (about 1 km/h), while pressing
continuously will correspond to a continuous speed
increase.
87