Range to empty = = shows the distance in km (or
miles) that the car can still cover before needing fuel,
assuming that driving conditions are kept unvaried.
The display will show “- - - -” in the following cases:
Trip time = time elapsed from the start of the new
mission (*).
(*) New mission = starts from last reset:
– “manual” reset is performed by the driver by
pressing the relevant button (see paragraph
“Control buttons”)
❒ range lower than 50 km;
❒ car parked with engine running for long time; when
restarting range indication will be displayed again
– “automatic” reset is performed when the Distance
travelled reaches 3999.9 km or when Trip Time
reaches 99:59 (99 hours and 59 minutes)
Distance travelled = shows the km (or miles)
covered from the start of the new mission (*).
Average consumption = shows the average
consumption calculated from the start of the new
mission (*); this value can be expressed in km/l or
l/100 km or in mpg.
– after reconnecting the battery.
IMPORTANT Lacking information, Trip computer
values are displayed with “- - - -”. When restoring
normal operating conditions after a failure, calculation
will restart regularly without resetting either previous
displayed values or the start of a new mission (*).
Instant consumption = shows fuel consumption
variation, this value is updated constantly. If the car is
parked with engine running the display will show
“- - - -”. When restarting the car, the instant
consumption indication will be displayed again.
IMPORTANT After disconnecting/reconnecting the
battery, certain displayed values will be equal to
“- - - -” until significant data for recalculation are
available.
Average speed = shows the average speed of the
car in relation with total time elapsed from the start of
the new mission (*).
26
English 
