Advertisement

Advertisement

Download User Manual App

Quickly access user manual for free!

Practical information -> Advice on care and maintenance for Your Fiat Scudo Van Third Generation (2022-2025)

Practical information  
Keyless Entry and Start  
You must not depress the brake pedal  
while switching the ignition on again, then  
switching it off. If you do, the engine will start,  
requiring you to restart the procedure.  
► While depressing the brake pedal, switch off  
the engine.  
► Release the brake pedal, then switch on the  
ignition.  
► While depressing the brake pedal, press the  
control to release the parking brake.  
► Release the brake pedal, then switch off the  
ignition.  
With drive selector and  
electric parking brake  
7
/
Release procedure  
► With the vehicle stationary and the engine  
running, depress the brake pedal and select  
mode N.  
Advice on care and  
maintenance  
Reverting to normal operation  
► While depressing the brake pedal, restart the  
Within 5 seconds:  
engine and apply the parking brake.  
► Depress and hold the brake pedal, then  
observe this order: switch off the engine and  
move the push selector forwards or backwards.  
► Release the brake pedal, then switch on the  
ignition.  
General recommendations  
Observe the following recommendations to avoid  
damaging the vehicle.  
With an automatic gearbox  
and electric parking brake  
Exterior  
/
► Place your foot on the brake and press the  
electric parking brake control to release it.  
► Release the brake pedal, then switch off the  
ignition.  
Never use a high-pressure jet wash in  
the engine compartment - risk of  
damaging the electrical components!  
Do not wash the vehicle in bright sunshine or  
extremely cold conditions.  
To release them  
► With the engine running and while depressing  
the brake pedal, set the gear selector to N.  
► While depressing the brake pedal, switch off  
the engine.  
► Release the brake pedal, then switch on the  
ignition again.  
► While depressing the brake pedal, press the  
control lever to release the parking brake.  
► Release the brake pedal, then switch off the  
ignition.  
A message is displayed on the  
instrument panel to confirm the unlocking  
of the wheels for 15 minutes.  
When the vehicle is free-wheeling, the  
audio system cannot be updated (message  
displayed on the instrument panel).  
When washing the vehicle in an  
automatic roller-brush car wash, be sure  
to lock the doors and, depending on version,  
move the electronic key away and deactivate  
the "hands-free" function (Hands-Free  
Tailgate Access).  
When using a pressure washer, keep the jet  
nozzle at a minimum distance of 30 cm from  
the vehicle (particularly when cleaning areas  
containing chipped paint, sensors or seals).  
After 15 minutes or reverting to normal  
operation  
Reverting to normal operation  
► While depressing the brake pedal, restart the  
engine and select mode P.  
► While depressing the brake pedal, restart the  
engine and select mode P.  
211  
Practical information  
Promptly clean up any stains containing  
chemicals liable to damage the vehicle's  
paintwork (including tree resin, bird  
droppings, insect secretions, pollen and tar).  
Depending on the environment, clean the  
vehicle frequently to remove salty deposits  
(in coastal areas), soot (in industrial areas)  
and mud/salts (in wet or cold areas). These  
substances can be highly corrosive.  
Contact a Fiat Dealership or a qualified  
workshop for advice on removing stubborn  
stains requiring special products (such as tar  
or insect removers).  
Preferably, have paint touch-ups performed  
by a Fiat Dealership or a qualified workshop.  
Never select the programme with hot wax  
finish.  
Bodywork  
High-gloss paint  
Never use high-pressure lances equipped  
with brushes - risk of scratching paint!  
Never apply glossy polish or preservatives to  
the bodywork or alloy wheels; these products  
irreversibly reveal glossy or spotted areas.  
Do not use abrasive products, solvents,  
petrol or oil to clean the bodywork.  
Never use an abrasive sponge to clean  
stubborn stains - risk of scratching the  
paintwork!  
Do not apply polish in strong sunshine, or to  
plastic or rubber parts.  
Choose high-pressure wash, or at least  
high-flow water jet.  
Rinse the vehicle with demineralised water.  
Only a clean microfibre cloth is recommended  
for wiping the vehicle; pass it over the vehicle  
without rubbing.  
Carefully wipe off any fuel spilt on the  
bodywork using a soft cloth, then allow to dry.  
Clean off minor marks (for example, finger  
marks), using a maintenance product  
recommended by Fiat.  
Use a soft cloth and soapy water or a pH  
neutral product.  
Gently wipe the bodywork with a clean  
microfibre cloth.  
Apply polish with the vehicle clean and dry.  
Comply with the instructions for use stated on  
the product.  
Interior  
When washing the vehicle, never use a  
water hose or high-pressure jet to clean  
the interior.  
Liquids carried in cups or other open  
containers can spill, presenting a risk of  
damage to the instruments and controls and  
the controls located on the centre console. Be  
vigilant!  
To clean instrument panels, touch screens  
or other displays, wipe gently with a soft,  
dry cloth. Do not use products (e.g. alcohol,  
disinfectant) or soapy water directly on these  
surfaces - risk of damage!  
Textured paint  
Decals  
This type of paint reacts under the effect of  
light, through variations in appearance and  
finish that highlight the lines and contours of the  
vehicle. Its varnish is enriched with particles that  
remain visible and create a unique satin effect  
with relief. Its slightly granular texture gives it a  
surprising touch.  
(Depending on version)  
Do not use a high-pressure washer to  
clean the vehicle - risk of damaging or  
detaching the decals!  
Use a high-flow hose (temperature  
between 25°C and 40°C).  
Place the jet of water perpendicular to the  
surface to be cleaned.  
Never attempt to clean without water.  
Never clean your vehicle in an automatic  
roller-brush car wash.  
Rinse the vehicle with demineralised water.  
212  
Practical information  
Leather  
7
Leather is a natural product. Appropriate regular  
care is essential for its durability.  
It must be protected and nourished using a  
specific leather product, to keep it supple and  
preserve its original appearance.  
Do not use maintenance products which  
are not suitable for cleaning leather  
(e.g. solvent, detergent, petrol, pure alcohol).  
Do not use bleaching or colour-removal  
products (e.g. perchloroethylene).  
When cleaning items partly made from  
leather, take care not to damage the other  
materials with the specific leather product.  
Before cleaning greasy stains or liquids,  
quickly mop up any surplus.  
Before cleaning, wipe off any residues liable  
to scuff the leather, using a cloth that has  
been dampened with demineralised water  
and thoroughly wrung out.  
Clean the leather, without rubbing too  
vigorously, using a soft cloth moistened with  
soapy water or a pH-neutral product.  
Dry with a soft, dry cloth.  
213