Practical information
into the ignition switch, or bringing the
key for the "Keyless Entry and Start"
system into the passenger compartment.
Switch on the ignition, then wait for 10
seconds before starting the engine.
► After filling, perform the same sequence of
operations in reverse order.
With manual or automatic
gearbox and manual parking
brake
In order not to overfill the AdBlue® tank:
– Add between 10 and 13 litres using
AdBlue® containers.
/
– Stop after the nozzle’s first automatic cut-
out, if you are refilling at a service station.
The system only registers AdBlue® top-ups of
5 litres or more.
► Switch off the ignition and remove the key
from the switch to switch off the engine.
or
► With Keyless Entry and Start, press the
"START/STOP" button to switch off the engine.
To release them
► With the vehicle stationary and engine
running, depress the brake pedal.
► With a manual gearbox, place the gear lever
into neutral.
► With an automatic gearbox, place the gear
selector to mode N.
► Release the parking brake.
► Release the brake pedal, then switch off the
engine.
If the AdBlue® tank is completely empty
– which is confirmed by the message
“Top up AdBlue: Starting impossible” – it is
essential to add at least 5 litres.
Accessing the AdBlue® tank
Free-wheeling
Reverting to normal operation
In certain situations, it is necessary to put the
vehicle into free-wheeling mode (e.g. towing, on
a rolling road, automatic car wash (Wash mode),
rail or sea transport).
The procedure varies according to the type of
gearbox and parking brake.
► Apply the parking brake.
► With an automatic gearbox, place the gear
selector to mode P.
► To access the AdBlue® tank, open the front
left-hand door.
► Turn the blue cap a 6th of a turn
anti-clockwise.
With a manual gearbox and
electric parking brake
► Release the cap upwards.
Never leave the vehicle unattended with
the vehicle into free-wheeling mode.
► With a container of AdBlue®: after checking
the expiry date, read the instructions on the
label carefully before pouring the contents of the
container into the vehicle's AdBlue tank.
► With an AdBlue® pump: insert the nozzle and
fill the tank until the nozzle automatically cuts
out.
/
To release them
► With the engine running and while depressing
the brake pedal, move the gear selector to the
neutral position.
210
English 
