STARTING AND DRIVING -> STARTING THE ENGINE for Your Fiat Tipo 4 Door Second Generation (2015-2026)

turn the ignition device to AVV and  
release it as soon as the engine starts;  
if the engine does not start within  
10 seconds, turn the ignition device  
back to STOP and wait for 10-15  
seconds before repeating the starting  
procedure;  
after the manoeuvre has been  
repeated, if the problem persists,  
contact a Fiat Dealership.  
only for Diesel versions, bring the  
ignition device to MAR, warning light  
will come on in the instrument panel  
STARTING THE  
ENGINE  
Before starting the car, adjust the  
seat, the interior rear view mirrors, the  
door mirrors and fasten the seat belt  
correctly.  
and wait for the  
switch off;  
warning light to  
turn the ignition device to AVV and  
press the ignition device for approx.  
two seconds or press it two times  
consecutively.  
Never press the accelerator to start the  
heat engine.  
If necessary, messages indicating the  
starting procedure can be shown on  
the display.  
WARNING Pressing the ignition device  
once quickly does not turn on the  
engine, but the key is inserted. To start  
the car after inserting the key, press  
the ignition device for approx. one  
second (versions with an electronic key)  
or for versions with a mechanical key,  
turn it to AVV for approx. 2 seconds.  
When releasing the ignition device,  
the READY icon will be visible on the  
instrument panel  
WARNING If, with the ignition device  
to MAR, the symbol on the display  
remains lit together with warning light  
turn the switch to STOP and then back  
to MAR. If the warning light (or the  
symbol of the display) remains on, try  
with the other keys provided with the  
car. Contact a Fiat Dealership if the  
engine still does not start.  
ENGINE STARTING  
PROCEDURE  
113) 114) 115) 116)  
30) 31) 32) 33)  
For versions with a mechanical key,  
proceed as follows:  
engage the parking brake and  
position the gear lever in neutral  
(versions with a manual transmission)  
or position the gear lever in position P  
(Parking) or N (Neutral);  
fully press down the clutch pedal,  
without pressing the accelerator  
(versions with a manual transmission),  
or versions with a dual clutch automatic  
transmission, press the brake pedal  
without pressing the accelerator;  
set the ignition device to MAR. For  
For versions with an electronic key,  
proceed as follows:  
WARNING If the "READY" message  
does not appear on the instrument  
panel despite the correct start-up  
procedure, contact a Fiat Dealership.  
engage the parking brake and  
position the gear lever in neutral (for  
versions with a manual transmission)  
or for versions with a dual clutch  
automatic transmission, position the  
gear lever in position P (Parking) or N  
(Neutral);  
fully depress the clutch pedal without  
touching the accelerator;  
Diesel versions, the  
warning light on  
the instrument panel turns on: wait for  
the warning light to switch off;  
118  
the brake pedal properly; if the  
pressure is not enough, the engine will  
not be switched off.  
the vehicle taking the electronic key  
with you, without the engine stopping.  
The vehicle will inform about the  
absence of the key on board, only if the  
doors are closed.  
ENGINE STARTING  
FAILURE  
Starting the engine with the  
electronic key battery (Keyless  
Entry/Go) run down or flat  
This feature can be exploited so that  
the engine does not switch off in  
particular traffic conditions.  
If the ignition device does not respond  
when the relevant button is pressed  
the electronic key battery might be run  
down or flat. Therefore, the system  
does not detect the presence of the  
electronic key on board the car and  
displays a dedicated message. In this  
case, rest the rounded edge of the  
electronic key (the side opposite the  
metal insert) on the ignition device  
and press the button using the  
electronic key. The ignition device is  
thus activated and the engine can be  
started.  
Switching the engine off (going from  
MAR to STOP position) the accessories  
are still supplied for about 3 minutes.  
When the driver side door is opened  
with instrument panel on, a brief  
acoustic warning will be emitted. The  
display will show a dedicated message.  
When the starting device is at STOP,  
the electric windows can still be  
operated for about 3 minutes. Opening  
one of the front doors cancels this  
function.  
WARNING when the engine is switched  
on and off, a metallic noise may be  
heard due to the opening/closing of the  
electrical contacts. This noise is normal  
and is not intended to be an anomaly.  
Important notes  
Do not leave the ignition device at MAR  
when the engine is off.  
If the vehicle is equipped with electronic  
key (Keyless Entry / Keyless Go), at a  
speed over 8 km/h it is still possible  
to switch the engine off, also for  
vehicles equipped with automatic  
transmission/dual clutch automatic  
transmission with lever in a position  
other than P (Parking).  
After a demanding drive, before turning  
the engine off you should allow it to idle  
to allow the temperature in the engine  
compartment to decrease.  
STOPPING THE ENGINE  
For petrol and diesel versions  
To stop the engine, proceed as follows:  
park the car in a position that is not  
dangerous for oncoming traffic;  
engage a gear (versions with manual  
transmission) or position the gear lever  
to P (Park) (versions with automatic  
transmission/dual clutch automatic  
transmission);  
IMPORTANT  
To switch off the engine in this  
situation, hold down the ignition device  
button for a while or press it 3 times  
in a row within a few seconds. In this  
case the engine will stop and the  
ignition device will switch to STOP.  
With Keyless Entry / Keyless Go  
system, it is possible to go away from  
113) Do not try to start the engine pouring  
fuel or other flammable fluid inside the  
throttle body air intake: this might damage  
the engine and injury people nearby.  
114) It is dangerous to run the engine in  
enclosed areas. The engine consumes  
oxygen and engine exhaust contains  
carbon dioxide, carbon monoxide and  
other toxic gasses.  
turn the ignition device to STOP with  
the engine idling.  
On the versions with Start&Stop  
system, to switch the engine off, you  
need to stop the vehicle by pressing  
119