07/09/12 09:20:03 32SAA650_073
Additional Information About Your Seat Belts
Seat Belt Maintenance
If a seat belt is worn during a crash,
it must be replaced by the dealer. A
WARNING: It is essential to replace
the entire assembly after it has been
worn in a severe impact even if damage
to the assembly is not obvious.
For safety, you should check the
condition of your seat belts regularly. belt that has been worn during a
crash may not provide the same level
Pull each belt out fully and look for
frays, cuts, burns, and wear. Check
that the latches work smoothly and
that the lap/shoulder belts retract
easily. Any belt not in good condition
or not working properly will not
provide good protection and should
be replaced as soon as possible.
of protection in a subsequent crash.
The dealer should also inspect the
anchors for damage and replace
them if needed.
WARNING: Care should be taken to
avoid contamination of the webbing with
polishes, oils and chemicals, and
particularly battery acid. Cleaning may
safely be carried out using mild soap and
water. The belt should be replaced if
webbing becomes frayed, contaminated
or damaged.
Automatic seat belt tensioners that
deployed during a crash must be
replaced.
WARNING: No modifications or
additions should be made by the user
which will either prevent the seat belt
adjusting devices from operating to
remove slack, or prevent the seat belt
assembly from being adjusted to remove
slack.
70
Driver and Passenger Safety
English 
