07/09/12 09:18:44 32SAA650_063
Protecting Children
Using Child Restraints with
Tethers
Since a tether can provide additional
security, we recommend using a
tether whenever one is required or
available. (The owners may check
with the child restraint system
maker to determine whether a tether
is available for a particular child
restraint system.)
WASHER
(For some types)
Your vehicle has two anchor points
on the ceiling near the tailgate
opening for securing a tether-style
child restraint system to the vehicle.
Remove the rear head restraints (see
page 126 ). The removed head
restraints should be secured so they
will not be thrown while you are
driving. Make sure to replace the
rear head restraints when the child
restraint systems are not in use.
BOLT
PLASTIC COVER
The anchor points are located on
both sides of the ceiling near the
tailgate opening. One side is covered
with only a cap and one side is
located inside the plastic cover. The
cap which covers one of the anchors
may be removed by hand, and a flat
tipped screwdriver may be used to
remove the plastic cover from the
other anchor point.
Remove the bolt and washer from
the left anchor point.
60
Driver and Passenger Safety
English 
