Whilst driving
Parking brake warning light
Check the Parking Brake
Warning Light by placing the
ignition switch to the ON
position (do not start the
engine).
This light will be illuminated when the
parking brake is applied with the igni-
tion switch in the START or ON posi-
tion.
Before driving, be sure the parking
brake is released and the Brake Warn-
ing Light is OFF.
OAC3069003TU
To release:
Firmly depress the brake pedal.
Slightly pull up the parking brake lever.
Whilst pressing the release button (1),
lower the parking brake (2).
If the Parking Brake Warning Light
remains on after the parking brake is
released whilst the engine is running,
there may be a malfunction in the brake
system. Immediate attention is neces-
sary.
If at all possible, cease driving the vehi-
cle immediately. If that is not possible,
use extreme caution whilst operating
the vehicle and only continue to drive
the vehicle until you can reach a safe
location.
If the parking brake does not release or
does not release all the way, we recom-
mend that the system be checked by a
HYUNDAI authorised repairer.
WARNING
Whenever leaving the vehicle or
parking, always come to a complete
stop and continue to depress the
brake pedal.
Move the shift lever into the 1st gear
(for Manual transmission vehicle) or
N (Neutral, for Automated Manual
Transmission vehicle) position, then
apply the parking brake, and place
the ignition switch in the LOCK/OFF
position.
6-32
English 
