Features of your vehicle -> HOOD for Your Hyundai I10 4 Door Second Generation (2013-2019)

Features of your vehicle  
HOOD  
Left-hand drive  
OBA043005L  
Right-hand drive  
OBA043019L  
OBA043020L  
3.Go to the front of the vehicle, raise the  
hood slightly, push the secondary latch  
(1) inside of the hood center and lift  
the hood (2).  
4.Pull out the support rod from the hood.  
5.Hold the hood opened with the support  
rod.  
WARNING - Hot parts  
Grasp the support rod in the area  
wrapped in plastic. The plastic will  
help prevent you from being burned  
by hot metal when the engine is hot.  
OBA043005  
Opening the hood  
1.Park the vehicle and set the parking  
brake.  
2.Pull the release lever to unlatch the  
hood. The hood should pop open  
slightly.  
4 30  
Features of your vehicle  
Closing the hood  
1.Before closing the hood, check the fol-  
lowing:  
• All filler caps in the engine compart-  
ment must be correctly installed.  
• Gloves, rags or any other com-  
bustible material must be removed  
from the engine compartment.  
2.Return the support rod to its clip to pre-  
vent it from rattling.  
3.Lower the hood until it is about 30 cm (1  
ft.) above the closed position and let it  
drop. Make sure that it locks into place.  
WARNING  
• Before closing the hood, ensure  
that all obstructions are removed  
from the hood opening. Closing  
the hood with an obstruction  
present in the hood opening may  
result in property damage or  
severe personal injury.  
• Always double check to be sure  
that the hood is firmly latched  
before driving away. If it is not  
latched, the hood could fly open  
while the vehicle is being driven,  
causing a total loss of visibility,  
which might result in an accident.  
• Do not move the vehicle with the  
hood raised. The view will be  
blocked and the hood could fall  
or be damaged.  
4 31