Get Features of your vehicle -> LIGHTING Guide for Hyundai I10 4 Door Second Generation (2013-2019)

Features of your vehicle

LIGHTING

Battery saver function (if equipped)

■ Type A

• The purpose of this feature is to pre-

vent the battery from being dis-

charged. The system automatically

turns off the exterior lights when the

driver removes the ignition key and

opens the driver-side door.

• With this feature, the parking lights will

turn off automatically if the driver parks

on the side of road at night.

ORB040046D

OBA043211IN

ORBC040047

OBA043212IN

■ Type B

If necessary, to keep the lights on

when the ignition key is removed, per-

form the following :

1) Open the driver-side door.

Lighting control

The light switch has a Headlight and a

Parking light position.

To operate the lights, turn the knob at the

end of the control lever to one of the fol-

lowing positions:

Parking light position (

)

2) Turn the parking lights OFF and ON

again using the light switch on the

steering column.

When the light switch is in the parking

light position, the parking(position) light,

license and instrument panel lights will

turn ON.

(1) OFF position

(2) Parking light position

(3) Headlight position

✽

NOTICE

The ignition switch must be in the ON

position to turn on the instrument panel

lights.

4 59

Features of your vehicle

■ Type A

ORBC040047

OBA043213IN

ORBC040049

OBA043214IN

ORBC040050

OBA043215IN

■ Type B

High beam operation

Flashing headlights

Headlight position (

)

To turn on the high beam headlights,

push the lever away from you. Pull it back

for low beams.

The high beam indicator will light when

the headlight high beams are switched on.

To flash the headlights, pull the lever

towards you. It will return to the normal

(low beam) position when released. The

headlight switch does not need to be on

to use this flashing feature.

When the light switch is in the headlight

position, the headlight, parking(position)

light, license and instrument panel lights

will turn ON.

To prevent the battery from being dis-

charged, do not leave the lights on for a

prolonged time whilst the engine is not

running.

✽

NOTICE

The ignition switch must be in the ON

position to turn on the headlights.

WARNING

Do not use high beam when there

are other vehicles. Using high beam

could obstruct the other driver's

vision.

4 60

Features of your vehicle

■ Type A

The lever will return to the OFF position

when released or when the turn is com-

pleted. If an indicator stays on and does

not flash or if it flashes abnormally, one of

the turn signal bulbs may be burned out

and will require replacement.

One-touch lane change function

(if equipped)

To activate an one-touch lane change

function, move the turn signal lever

slightly and then release it. The lane

change signals will blink 3 times.

✽

NOTICE

If an indicator flash is abnormally quick

or slow, a bulb may be burned out or have

a poor electrical connection in the circuit.

ORBC040051

■ Type B

OBA043217IN

Turn signals and lane change

signals

To signal a turn, push down on the lever

for a left turn or up for a right turn in posi-

tion (A). To signal a lane change, move

the turn signal lever slightly and hold it in

position (B).

4 61

Features of your vehicle

■ Type A

■ Type C

CAUTION

When in operation, the fog lights

consume large amounts of vehicle

electrical power. Only use the fog

lights when visibility is poor or

unnecessary battery and generator

drain could occur.

✽

NOTICE

■ Type B

■ Type D

The ignition switch must be in the ON

position to turn on the front fog light.

ORBC040052/ORB040052D/OTA040219R/ORBI041052

Front fog light (if equipped)

Fog lights are used to provide improved visibility and avoid accidents when visi-

bility is poor due to fog, rain or snow etc. The fog lights will turn on when fog light

switch (1) is turned to the ON position after the parking light is turned on.

To turn off the fog lights, turn the switch to the OFF position.

4 62

Features of your vehicle

■ Type A

■ Type C

✽

NOTICE

To turn on the rear fog light switch, the

ignition switch must be in the ON position.

■ Type B

■ Type D

ORBC040053/ORBC040052E/OTA040217R/OTA040218R

Rear fog light (if equipped)

The rear fog lights turn on when the rear fog light switch is turned on after the light

switch is in the parking light position or headlight position.

To turn off the rear fog lights, turn the switch to the OFF position.

4 63

Features of your vehicle

The higher the number of the switch

position, the lower the headlight beam

level. Always keep the headlight beam at

the proper leveling position, or headlights

may dazzle other road users.

Listed below are the examples of proper

switch settings. For loading conditions

other than those listed below, adjust the

switch position so that the beam level

may be the nearest as the condition

obtained according to the list.

■ Left-hand drive

Daytime running light

(if equipped)

Daytime Running Lights (DRL) can make

it easier for others to see the front of your

vehicle during the day. DRL can be help-

ful in many different driving conditions,

and it is especially helpful after dawn and

before sunset.

The DRL system will turn off the dedicat-

ed lamp when:

• The headlight (low beam) switch is ON.

• The engine is OFF

OBA043008L

■ Right-hand drive

Loading condition

Driver only

Switch position

• The front fog light is ON.

0

1

Driver + Front passenger

Full passengers

Full passengers +

Maximum permissible

loading

3

5

Driver + Maximum permis-

sible loading

OBA043008

Headlight leveling device

(if equipped)

To adjust the headlight beam level

according to the number of passengers

and loading weight in the luggage area,

turn the beam leveling switch.

4 64

Features of your vehicle -> LIGHTING for Your Hyundai I10 4 Door Second Generation (2013-2019)

Related Topics

Features of your vehicle

Popular Owner Manuals

Latest Owner Manuals