2020-2026 Hyundai I10 4 Door Safety system -> Head restraint User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety system -> Head restraint for Your Hyundai I10 4 Door Third  Generation (2020-2026)

Safety system  
Head restraint  
WARNING  
The vehicle’s front and rear seats  
have adjustable head restraints. The  
head restraints provide comfort for  
passengers, but more importantly  
they are designed to help protect  
passengers from whiplash and other  
neck and spinal injuries during an  
accident, especially in a rear impact  
collision.  
Cargo  
Cargo should always be secured  
to prevent it from being thrown  
about the vehicle in a collision and  
causing injury to the vehicle occu-  
pants. Do not place objects in the  
rear seats, since they cannot be  
properly secured and may hit the  
front seat occupants in a collision.  
WARNING  
WARNING  
To reduce the risk of serious injury  
or death in an accident, take the  
following precautions when adjust-  
ing your head restraints:  
Cargo loading  
Make sure the engine is off, the  
Automated manual transmission  
is in N (Neutral) or the Manual  
transmission is in R (Reverse) or  
1st, and the parking brake is  
securely applied whenever loading  
or unloading cargo. Failure to take  
these steps may allow the vehicle  
to move if the shift lever is inadver-  
tently moved to another position.  
‡ꢀ Always properly adjust the head  
restraints for all passengers  
BEFORE starting the vehicle.  
3-12  
03  
Front seat head restraints  
ODN8039067L  
OOSEV038012L  
Adjust the head restraints so the  
middle of the head restraints is  
at the same height as the height  
of the top of the eyes.  
The driver’s and front passenger’s  
seats are equipped with adjustable  
head restraints for the passengers  
safety and comfort.  
‡ꢀ NEVER adjust the head restraint  
position of the driver’s seat when  
the vehicle is in motion.  
‡ꢀ Adjust the head restraint as  
close to the passenger’s head as  
possible. Do not use a seat cush-  
ion that holds the body away  
from the seatback.  
‡ꢀ Make sure the head restraint  
locks into position after adjust-  
ing it.  
OGB034007  
NOTICE  
Forward and rearward adjustment  
To prevent damage, NEVER hit or  
pull on the head restraints.  
The head restraint may be adjusted  
forward to 3 different positions by  
pulling the head restraint forward to  
the desired detent. To adjust the  
head restraint to it’s furthest rear-  
wards position, pull it fully forward to  
the farthest position and release it.  
CAUTION  
When there is no occupant in the  
rear seats, adjust the height of the  
head restraint to the lowest posi-  
tion. The rear seat head restraint  
can reduce the visibility of the rear  
area.  
3-13  
Safety system  
OAC3039039R  
OAC3039041R  
Adjusting the height up and down  
To raise the head restraint:  
Removal/Reinstall  
To remove the head restraint:  
1. Pull it up to the desired position (1).  
1. Recline the seatback (2) using the  
seatback angle lever or switch (1).  
2. Raise head restraint as far as it  
can go.  
To lower the head restraint:  
1. Push and hold the release button  
(2) on the head restraint support.  
3. Press the head restraint release  
button (3) whilst pulling the head  
restraint up (4).  
2. Lower the head restraint to the  
desired position (3).  
WARNING  
NOTICE  
NEVER allow anyone to travel in a  
seat with the head restraint  
removed.  
OHI038136  
If you recline the seatback towards  
the front with the head restraint  
and seat cushion raised, the head  
restraint may come in contact with  
the sunvisor or other parts of the  
vehicle.  
3-14  
03  
Rear seat head restraints  
OAC3039040R  
OAI3039007  
To reinstall the head restraint :  
1. Recline the seatback.  
* : 5 Seater  
2. Put the head restraint poles (2) into  
the holes whilst pressing the  
release button (1).  
The rear seats are equipped with  
head restraints in all the seating posi-  
tions for the passenger’s safety and  
comfort.  
3. Adjust the head restraint to the  
appropriate height.  
4. Recline the seatback (4) using  
seatback angle lever or switch (3).  
WARNING  
Always make sure the head  
restraint locks into position after  
reinstalling and adjusting it prop-  
erly.  
OAI3039008  
Adjusting the height up and down  
To raise the head restraint:  
1. Pull it up to the desired position (1).  
To lower the head restraint:  
1. Push and hold the release button  
(2) on the head restraint support.  
2. Lower the head restraint to the  
desired position (3).  
3-15  

Related Topics

Popular Owner Manuals