Get Features of your vehicle -> AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED) Guide for Hyundai I20 4 Door First Generation (2008-2014)

Features of your vehicle

AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED)

1. Temperature control knob

2. AUTO (automatic control) button

3. OFF button

5. Mode selection button

8. Air conditioning button

9. Air intake control button

10. Climate control display

6. Rear window defroster button

7. Fan speed control knob

4. Front windshield defroster button

OPB049087

D240000AFD

4 72

Features of your vehicle

2. Set the temperature control knob to

the desired temperature.

If the temperature is set to the lowest

setting (Lo), the air conditioning sys-

tem will operate continuously.

3. To turn the automatic operation off,

select any button or knob of the fol-

lowing:

• Mode selection button

• Air conditioning button

• Front windshield defroster button

• Air intake control button

• Fan speed control knob

OPB049088

OUN026312

D240100APB

✽ NOTICE

The selected function will be controlled

manually while other functions operate

automatically.

Automatic heating and air condi-

tioning

Never place anything over the sensor

located on the instrument panel to

ensure better control of the heating and

cooling system.

The automatic climate control system is

controlled by simply setting the desired

temperature.

For your convenience and to improve the

effectiveness of the climate control, use

the AUTO button and set the tempera-

ture to 23°C (73°F).

The Full Automatic Temperature Control

(FATC) system automatically controls the

heating and cooling system as follows:

Regardless of the temperature setting,

when using automatic operation, the air

conditioning system can automatically

turn on to decrease the humidity inside

the vehicle, even if the temperature is set

to warm.

1. Press the AUTO button. The modes,

fan speeds, air intake and air-condi-

tioning will be controlled automatically

by setting the temperature.

4 73

Features of your vehicle

D240200APB

Manual heating and air condition-

ing

Face-Level (B, D)

The heating and cooling system can be

controlled manually by pushing buttons

other than the AUTO button. In this case,

the system works sequentially according

to the order of buttons selected.

Air flow is directed toward the upper body

and face. Additionally, each outlet can be

controlled to direct the air discharged

from the outlet.

1. Start the engine.

2. Set the mode to the desired position.

Bi-Level (B, D, C)

To improve the effectiveness of heat-

ing and cooling :

Air flow is discharged towards the face and

floor.

OPB049090

- Heating:

- Cooling:

D240201AFD

Mode selection

Floor-Level (C, A, D)

3. Set the temperature control to the

desired position.

The mode selection button controls the

direction of the air flow through the venti-

lation system.

Most of the air flow is directed to the

floor.

4. Set the air intake control to the outside

(fresh) air or recirculated air position.

Every time you press the mode selection

button, the mode will change as follows:

5. Set the fan speed control to the

desired speed.

6. If air conditioning is desired, turn the

air conditioning system on.

Press the AUTO button in order to con-

vert to full automatic control of the sys-

tem.

4 74

Features of your vehicle

Floor/Defrost-Level (A, C, D)

Most of the air flow is directed to the floor

and the windshield with a small amount

directed to the side window defrosters.

Defrost-Level (A, D)

Most of the air flow is directed to the

windshield.

OPB049091

OPB049082R

❈ Refer to the illustration in the “Manual

climate control system”.

Maximum (MAX) defrost mode

Instrument panel vents

When you select the MAX defrost mode,

the following system settings will be

made automatically;

The outlet vents can be opened or closed

separately using the thumbwheel.

Also, you can adjust the direction of air

delivered from these vents using the vent

control lever as shown.

• The air conditioning system will turn on.

• The outside(fresh) air position will be

selected.

• The fan speed will be set to the high

speed.

To turn the MAX defrost mode off, press

the mode selection button or MAX

defrost button again or AUTO button.

4 75

Features of your vehicle

Temperature conversion

You can switch the temperature mode

between Centigrade to Fahrenheit as fol-

lows:

While pressing the OFF button, press the

AUTO button for 3 seconds or more.

The display will change from Centigrade

to Fahrenheit, or from Fahrenheit to

Centigrade.

If the battery has been discharged or dis-

connected, the temperature mode dis-

play will reset to Centigrade.

OPB049094

OPB049095

D240202APB

D240203APB

Temperature control

Air intake control

This is used to select outside (fresh) air

position or recirculated air position.

The temperature will increase to the

maximum (HI) by turning the knob to the

extreme right.

To change the air intake control position,

press the control button.

The temperature will decrease to the

minimum (Lo) by turning the knob to the

extreme left.

When you turn the knob, the temperature

will increase or decrease by 0.5°C (1°F).

4 76

Features of your vehicle

Recirculated air position

The indicator light on the

✽ NOTICE

WARNING

Prolonged operation of the heater in the

recirculated air position (without air

conditioning selected) may cause fog-

ging of the windshield and side windows

and the air within the passenger com-

partment may become stale.

In addition, prolonged use of the air con-

ditioning with the recirculated air posi-

tion selected, will result in excessively

dry air in the passenger compartment.

button illuminates when the

recirculated air position is

selected.

• Continuous operation of the cli-

mate control system in the recircu-

lated air position may allow humid-

ity to increase inside vehicle which

may fog the glass and obscure vis-

ibility.

With the recirculated air

position selected, air from

the passenger compartment

will be drawn through the

heating system and heated

or cooled according to the

function selected.

• Do not sleep in a vehicle with air

conditioning or heating system on.

It may cause serious harm or death

due to a drop in the oxygen level

and/or body temperature.

• Continuous operation of the cli-

mate control system in the reciru-

clated air position can cause

drowsiness or sleepiness, and

loss of vehicle control. Set the air

intake control to the outside (fresh)

air position as much as possible

while driving.

Outside (fresh) air position

The indicator light on the

button will not illuminate

when the outside (fresh) air

position is selected.

With the outside (fresh) air

position selected, air enters

the vehicle from outside and

is heated or cooled accord-

ing to the function selected.

4 77

Features of your vehicle

OPB049096

OPB049097

OPB049098

D240205APB

D240206AHM

D240208APB

Fan speed control

The ignition switch must be in the ON

position for fan operation.

Air conditioning

OFF mode

Press the A/C button to turn the air con-

ditioning system on (indicator light will

illuminate).

Press the OFF button to turn off the cli-

mate control system. However you can

still operate the mode and air intake but-

tons as long as the ignition switch is in

the ON position.

The fan speed control knob allows you to

control the fan speed of the air flowing

from the ventilation system. To change

the fan speed, turn the knob to the right

for higher speed or left for lower speed.

Press the button again to turn the air

conditioning system off.

4 78

Features of your vehicle -> AUTOMATIC CLIMATE CONTROL SYSTEM (IF EQUIPPED) for Your Hyundai I20 4 Door First Generation (2008-2014)

Related Topics

Features of your vehicle

Popular Owner Manuals

Latest Owner Manuals