Get Features of your vehicle -> LIGHTING Guide for Hyundai I20 4 Door First Generation (2008-2014)

Features of your vehicle

Type A

LIGHTING

D190100APB

Battery saver function

• The purpose of this feature is to pre-

vent the battery from being dis-

charged. The system automatically

turns off the exterior lights when the

driver removes the ignition key and

opens the driver-side door.

• With this feature, the parking lights will

turn off automatically if the driver parks

on the side of road at night.

OPB049059

OPB049060

Type B

If necessary, to keep the lights on

when the ignition key is removed, per-

form the following :

1) Open the driver-side door.

2) Turn the parking lights OFF and ON

again using the light switch on the

steering column.

OPB049059R

OPB049060R

D190400AUN

D190401AHM

Parking light position (

)

Lighting control

When the light switch is in the parking

light position (1st position), the tail, posi-

tion, license and instrument panel lights

will turn ON.

The light switch has a Headlight and a

Parking light position.

To operate the lights, turn the knob at the

end of the control lever to one of the fol-

lowing positions:

(1) OFF position

(2) Parking light position

(3) Headlight position

4 52

Features of your vehicle

Type A

OPB049061

OPB049062

OPB049063

Type B

OPB049061R

OPB049062R

OPB049063R

D190402AHM

D190500AUN

To flash the headlights, pull the lever

towards you. It will return to the normal

(low-beam) position when released. The

headlight switch does not need to be on

to use this flashing feature.

High beam operation

Headlight position (

)

To turn on the high beam headlights, push

the lever away from you. Pull it back for

low beams.

The high-beam indicator will light when the

headlight high beams are switched on.

When the light switch is in the headlight

position (2nd position) the head, tail,

position, license and instrument panel

lights will turn ON.

To prevent the battery from being dis-

charged, do not leave the lights on for a

prolonged time while the engine is not run-

ning.

✽

NOTICE

The ignition switch must be in the ON

position to turn on the headlights.

4 53

Features of your vehicle

Type A

They will self-cancel after a turn is com-

pleted. If the indicator continues to flash

after a turn, manually return the lever to

the OFF position.

To signal a lane change, move the turn

signal lever slightly and hold it in position

(B). The lever will return to the OFF posi-

tion when released.

If an indicator stays on and does not

flash or if it flashes abnormally, one of the

turn signal bulbs may be burned out and

will require replacement.

OPB049064

OPB049065

Type B

✽ NOTICE

If an indicator flash is abnormally quick

or slow, a bulb may be burned out or

have a poor electrical connection in the

circuit.

OPB049064R

OPB049065R

D190600AHM

D190700APB

Front fog light (if equipped)

Turn signals and lane change sig-

nals

Fog lights are used to provide improved

visibility when visibility is poor due to fog,

rain or snow etc. The fog lights will turn

on when the fog light switch (1) is turned

to the on position (2) after the parklight is

turned on. Also, the ignition switch

should be in the ON position.

The ignition switch must be on for the

turn signals to function. To turn on the

turn signals, move the lever up or down

(A). The green arrow indicators on the

instrument panel indicate which turn sig-

nal is operating.

4 54

Features of your vehicle

Type A

To turn off the fog lights, turn the switch

to the off position.

The rear fog lights turn on when the rear

fog light switch is turned on after the front

fog light switch is turned on and the

headlight switch is in the parklight posi-

tion.

CAUTION

When in operation, the fog lights

consume large amounts of vehicle

electrical power. Only use the fog

lights when visibility is poor.

To turn the rear fog lights off, turn the rear

fog light switch to the off position or turn

the headlight switch off.

D190900APB

Daytime running light

(if equipped)

OPB049066

Type B

The Daytime Running Lights (DRL) can

make it easier for others to see the front

of your vehicle during the day. DRL can

be helpful in many different driving condi-

tions, and it is especially helpful after

dawn and before sunset.

The DRL system will make the headlights

turn OFF when:

1. The parklight switch is ON.

2. The engine stops.

OPB049066R

D190800APB

Rear fog light (if equipped)

To turn the rear fog lights on, turn the

headlight switch to the headlight on posi-

tion and turn the rear fog light switch (1)

to the on position (3).

4 55

Features of your vehicle

The higher the number of the switch

position, the lower the headlight beam

level. Always keep the headlight beam at

the proper leveling position, or headlights

may dazzle other road users.

Listed below are the examples of proper

switch settings. For loading conditions

other than those listed below, adjust the

switch position so that the beam level

may be the nearest as the condition

obtained according to the list.

Loading condition

Driver only

Switch position

OPB049067R

D191000APB

0

Headlight leveling device

(if equipped)

Driver + front passenger

Full passengers

To adjust the headlight beam level

according to the number of passengers

and the loading weight in the luggage

area, turn the beam leveling switch.

1

(including driver)

Full passengers (including

driver) + full trunk loading

(or light trailer loading)

Driver + full trunk loading

(or maximum trailer load-

ing)

2

3

4 56

Features of your vehicle -> LIGHTING for Your Hyundai I20 4 Door First Generation (2008-2014)

Related Topics

Features of your vehicle

Popular Owner Manuals

Latest Owner Manuals