Features of your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
D250000AHM
WARNING - Windshield
heating
Do not use the
or
position
during cooling operation in
extremely humid weather. The dif-
ference between the temperature of
the outside air and the windshield
could cause the outer surface of
the windshield to fog up, causing
loss of visibility. In this case, set
the mode selection knob or button
OPB049099
OPB049100
D250102AFD
Manual climate control system
to the
position and fan speed
To defrost outside windshield
1. Set the fan speed to the highest
(extreme right) position.
control knob or button to the lower
speed.
D250101AFD
To defog inside windshield
1. Select any fan speed except “0” posi-
tion.
2. Select desired temperature.
2. Set the temperature to the extreme
hot position.
• For maximum defrosting, set the temper-
ature control to the extreme right/hot
position and the fan speed control to the
highest speed.
3. Select the
position.
3. Select the
position.
4. The outside (fresh) air and air condi-
tioning will be selected automatically.
4. The outside (fresh) air and air condi-
tioning (if equipped) will be selected
automatically.
• If warm air to the floor is desired while
defrosting or defogging, set the mode to
the floor-defrost position.
If the air-conditioning (if equipped) and
outside (fresh) air position are not select-
ed automatically, press the correspon-
ding button manually.
• Before driving, clear all snow and ice from
the windshield, rear window, outside rear
view mirrors, and all side windows.
• Clear all snow and ice from the hood and
air inlet in the cowl grill to improve heater
and defroster efficiency and to reduce the
probability of fogging up inside of the
windshield.
4 79
English 
