Features of your vehicle
HAZARD WARNING FLASHER
D280601APB
• SET (1)
Pressing the "SET" button for more than
1 second will change the display to the
calendar/clock setup mode.
Pressing the "SET" button for less than 1
second will change the setting. The
selected setting will blink.
❈ The order of the setup is DAYfi
MONTHfi YEARfi HOURfi MINUTE.
• ▲/▼ (2)
Pressing the ▲ or ▼ button will change
the data of the calendar and clock.
OPB049134
OPB049058R
D281200AHM-EE
D180000AHM
The hazard warning flasher should be
used whenever you find it necessary to
stop the vehicle in a hazardous location.
When you must make such an emer-
gency stop, always pull off the road as far
as possible.
Outside thermometer
If the ▲ or ▼ button is not pressed for
approximately 15 seconds, it will return
to the original display.
The current outside temperature is dis-
played in 1°C (1°F) increments. The tem-
perature range is between -40°C ~ 75°C
(-40°F~167°F).
If you finish setting the date and time,
press the "SET" button for more than 1
second again. It will return to the original
display.
The hazard warning lights are turned on
by pushing in the hazard switch. Both
turn signal lights will blink. The hazard
warning lights will operate even though
the key is not in the ignition switch.
❈ The outside ambient temperature unit
(°C«°F) and distance unit (km«mile)
can be converted the same way as
well.
To turn the hazard warning lights off,
push the switch again.
4 51
English 
