Get Maintenance -> Headlight and front fog light aiming (For Europe) Guide for Hyundai I20 4 Door Third Generation (2021-2026)

ꢀFront Fog light

Headlight and front fog light

aiming (For Europe, if equipped)

Headlight aiming

ꢀType A

OBC3090040

)RJꢀOLJKWꢀꢁLIꢀHTXLSSHGꢂ

1. Remove the under cover by rotating

the screws and bolts.

2. Reach your hand into the back of the

front bumper.

OBC3090041

ꢀType B

3. Disconnect the power connector from

the socket.

4. Remove the bulb-socket from

the housing by turning the socket

counterclockwise until the tabs on

the socket align with the slots on the

housing.

5. Install the new bulb-socket into the

housing by aligning the tabs on the

socket with the slots in the housing.

Push the socket into the housing and

turn the socket clockwise.

OBC3090057

ꢀType C

6. Connect the power connector to the

socket.

7. Reinstall the front bumper under

cover.

OBC3TN091004

1. Inflate the tyres to the specified

pressure and remove any loads from

the vehicle except the driver, spare

tyre, and tools.

2. The vehicle should be placed on a flat

floor.

9-65

Maintenance

3. Draw vertical lines (Vertical lines

passing through respective head

light centres) and a horizontal line

(Horizontal line passing through

centre of head lamps) on the screen.

Front fog light aiming (if equipped)

4. With the headlight and battery in

normal condition, aim the headlights

so the brightest portion falls on the

horizontal and vertical lines.

5. To aim the low beam left or

right, turn the driver clockwise or

counterclockwise. To aim the low

beam up or down, turn the driver

clockwise or counterclockwise.

To aim the high beam up or

down, turn the driver clockwise or

counterclockwise.

OBC3090042

The front fog light can be aimed as the

same manner of the head lights aiming.

With the front fog lights and battery

normal condition, aim the front fog

lights. To aim the front fog light up

or down, turn the driver clockwise or

counterclockwise.

9-66

Aiming point

H1 : Lighting centre Ground clearance of Headlight Low & High Beam

H3 : Lighting centre Ground clearance of Front fog light

W1 : Lighting centre Distance between Headlight Low & High Beam

W3 : Lighting centre Distance between Front fog light

OBC3090043

1. Headlamp (LOW - H1, W1 / HIGH BEAM - H2, W2)

mm(in.)

Vehicle condition

“H1”

“H2”

“W1”

“W2”

1320 (52.0)

Without driver (HAL 2 MFR)

Without driver (LED 4 MFR)

With driver (HAL 2 MFR)

With driver (LED 4 MFR)

654.9 (25.8) 654.9 (25.8)

1320 (52.0)

670.4 (26.4) 622.3 (24.5) 1396.8 (55.0) 1233.6 (48.57)

646.9 (25.5) 646.9 (25.5) 1320 (52.0) 1320 (52.0)

662.4 (26.1) 614.3 (24.2) 1396.8 (55.0) 1233.6 (48.57)

2. Fog lamp (H3, W3)

Vehicle condition

Without driver

With driver

“H3”

“W3”

352 (13.9)

344 (13.6)

1434.4 (56.5)

9-67

Maintenance

Head lamp low beam

ꢀBased on 10m screen

OBC3090059

1. Turn the low beam on without driver aboard.

2. The cut-off line should be projected in the cut-off line shown in the picture.

3. When aiming the low beam, vertical aiming should be adjusted after adjusting the

horizontal aiming.

4. If the head lamp leveling device is equipped, adjust the head lamp levelling device

switch with 0 position.

9-68

Front fog light

ꢀBased on 10m screen

OBC3090060

1. Turn the front fog lamp on with the driver (75 kg) aboard.

2. The cut-off line should be projected in the allowable range (shaded region).

9-69

Maintenance -> Headlight and front fog light aiming (For Europe) for Your Hyundai I20 4 Door Third Generation (2021-2026)

Related Topics

Maintenance

Popular Owner Manuals

Latest Owner Manuals