Maintenance
OBC3090048
OBC3090050
[1] : Turn Signal Light,
[1] : Rear Fog Light, [2] : Back-up Light
7XUQꢀVLJQDOꢀOLJKWꢀꢀꢀꢀ
4. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on the
assembly.
5. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on the
bulb align with the slots in the socket.
Pull the bulb out of the socket.
6. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
7. Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
5HDUꢀIRJꢀOLJKW
1. Remove the rear tyre and wheel cover.
2. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on the
assembly.
3. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on the
bulb align with the slots in the socket.
Pull the bulb out of the socket.
4. Insert a new bulb in the socket.
5. Reinstall the light assembly to the
body of the vehicle.
%DFNꢃXSꢀOLJKW
1. Open the tailgate and remove the
tailgate trim.
2. Loosen the retaining screw of the
tailgate lid cover and then remove the
cover.
8. Reinstall the light assembly to the
body of the vehicle.
7DLOꢀOLJKWꢁꢀ6WRSꢀOLJKW
3. Disconnect the connector and then
remove the nuts by turning the nuts
counter clockwise.
If the LED lamp does not operate,
we recommend that the system be
inspected by a HYUNDAI authorised
repairer. The LED lamps cannot be
replaced as a single unit because it is an
integrated unit. The LED lamp has to be
replaced with the unit.
4. Take the light assembly out.
Unless a skilled technician checks or
repairs the LED lamp, it may damage
related parts of the vehicle.
9-74
English 
