09
ꢀWith a full-size spare tyre (if equipped)
If you overfill the tyre, release air by
pushing on the metal stem in the centre
of the tyre valve. Recheck the tyre
pressure with the tyre gauge. Be sure
to put the valve caps back on the valve
stems. Without the valve cap, dirt or
moisture could get into the valve core
and cause air leakage. If a valve cap is
missing, install a new one as soon as
possible.
CBGQ0706
Tyre rotation
ꢀWithout a spare tyre
To equalize tread wear, HYUNDAI
recommends that the tyres be rotated
every 10,000 miles (15,000 km) or
sooner if irregular wear develops.
During rotation, check the tyres for
correct balance.
When rotating tyres, check for uneven
wear and damage. Abnormal wear
is usually caused by incorrect tyre
pressure, improper wheel alignment,
out-of-balance wheels, severe braking
or severe cornering. Look for bumps or
bulges in the tread or side of the tyre.
Replace the tyre if you find any of these
conditions. Replace the tyre if fabric or
cord is visible. After rotation, be sure to
bring the front and rear tyre pressures to
specification and check lug nut tightness
(proper torque is 11~13kgf.m (79~94 lbf.
ft, 107~127N.m).
CBGQ0707
ꢀDirectional tyres (if equipped)
CBGQ0707A
Disc brake pads should be inspected for
wear whenever tyres are rotated.
9-35
English 
