Get Convenience features -> Digital side mirror (DSM) (if equipped) Guide for Hyundai Ioniq SUV First Generation (2021-2026)

Convenience features

',*,7$/ꢀ6,'(ꢀ0,5525ꢀǣ'60Ǥꢀǣ,)ꢀ(48,33('Ǥ

ꢀDSM Camera

CAUTION

śꢀ The digital side mirrors show the

rear view as an image, so the view

may differ from the actual view and

you cannot see the field of view out

of the set position. Be careful whilst

driving.

śꢀ The display of the DSM monitor

may seem blur due to strong light

sources such as direct sunlight and

may temporarily be obscured by light

smear or vehicle headlights. Use the

inside rearview mirror, etc. to see

around the vehicle.

ONE1051228

ꢀDSM Monitor

śꢀ In certain situations, an image error

may occur, such as the DSM monitor

being out of focus or displaying

incorrect colours. This makes it

difficult to clearly see moving

objects and causes your eyes to feel

tired due to watching the monitor for

a long time.

ONE1051215K

śꢀ Always pay attention to the condition

of your vehicle whilst driving. If

you think there is an error in the

vehicle, we recommend that you

immediately park in a safe place

and contact an authorised HYUNDAI

dealer.

The digital side mirrors are a replacement

for the outside rearview mirrors and help

with changing lanes by displaying the

rear view image on the monitors inside

the vehicle.

śꢀ If the DSM monitor display is not

clear, the monitor lenses may be

contaminated or foggy. Wipe the

DSM camera lenses or activate the

defroster to remove fog or foreign

substances before driving. Be careful

not to damage the lens whilst wiping,

and be careful not to get burned by

the operation of the defroster.

Information

śꢀ 7KHꢀ'60ꢀPRQLWRUꢀEULJKWQHVVꢀLVꢀOLQNHGꢀ

to the instrument cluster’s brightness.

śꢀ 7KHꢀ'60ꢀFDPHUDꢀDQJOHꢀLVꢀOLQNHGꢀWRꢀWKHꢀ

LQWHJUDWHGꢀPHPRU\ꢀV\VWHPꢀꢁ,06ꢂꢃ

WARNING

Do not adjust or fold the DSM cameras

whilst driving. It distracts you from

driving and may cause an accident.

5-36

05

Operating the digital side

mirrors

Turning on the DSM monitors

DSM warnings and indicators

The warnings and indicators displayed on

the DSM monitors are as follows.

When you unlock the doors or start the

vehicle remotely, the digital side mirrors

will prepare for operation. When you

open a door or unfold the DSM cameras,

the DSM monitors will turn on.

Explanation

Driving assistance warning

śꢀBlind-Spot Collision-

Avoidance Assist (BCA)

śꢀSafe Exit Warning/Assist

(SEW/SEA)

Turning off the DSM monitors

śꢀRear Cross-Traffic Collision-

Avoidance Assist (RCCA)

śꢀ When you stop the vehicle and

lock the doors, or seven minutes

after stopping the vehicle, the DSM

monitors will automatically turn off

and the DSM cameras will fold.

DSM check indicator

śꢀ If you fold the DSM cameras whilst the

vehicle is on, the DSM monitors will

display a black screen and notify you

that the digital side mirrors are folded.

śꢀ The DSM monitors are automatically

turned on or off based on various

conditions, such as the vehicle and

door status.

DSM monitor off indicator

śꢀDisplayed after seven

minutes after the vehicle

OFF

stops

śꢀCounts 10 seconds for screen

off

Wide view mode switch

indicator

WIDE

5-37

Convenience features

Displaying the guidelines

Adjusting the DSM cameras

When you turn on the turn signal

indicator to change lanes, the rearview

screen and the lane change guidelines

will be displayed on the DSM monitors.

śꢀ Red: 3 m away from the rear of the

vehicle

śꢀ Orange: 12 m away from the rear of

the vehicle

Setting the feature

1. On the infotainment system, press

œ6HWXSꢀƟꢀ9HKLFOHꢀƟꢀ&RQYHQLHQFHꢀƟꢀ

Digital Side Mirror’.

2. Select ‘Lane change assistance

guideline’ to activate or deactivate the

feature.

ONE1051028

1. With Start/Stop button in the ‘ACC’,

‘ON’ or ‘START’ position, move the

DSM camera selection lever (1) to

select L (Left) or R (Right).

2. Use the DSM camera adjustment

switch (2) to adjust the camera angle.

The infotainment system setup menu

may change after updates. For detailed

information, refer to the web manual of

the infotainment system.

NOTICE

Do not adjust the DSM cameras

manually. Adjusting the DSM cameras

manually may damage the related

parts.

Guideline display conditions

śꢀ The turn signal indicator is turned on.

Guideline removal conditions

śꢀ The vehicle is turned off.

śꢀ The turn signal indicator is turned off.

śꢀ The hazard warning light is turned on.

CAUTION

śꢀ The lane change guidelines may

differ from the actual situation

depending on your vehicle and the

road conditions.

śꢀ To change lanes, turn on the turn

signal indicator in advance and

secure enough space in the lane

before entering.

5-38

05

When ‘Enable on Door Unlock’ is

selected, you can select ‘Enable on

Driver Approach’. If you select ‘Enable on

Driver Approach’, the DSM cameras will

unfold when you approach the vehicle

with the smart key.

Folding/Unfolding the DSM

cameras

DSM camera folding button

The infotainment system setup menu

may change after updates. For detailed

information, refer to the web manual of

the infotainment system.

Information

)RUꢀ\RXUꢀVDIHW\ꢄꢀWKHꢀ'60ꢀFDPHUDVꢀFDQQRWꢀ

be folded when driving at a speed of 15

km/h or faster.

ONE1051029

To fold or unfold the DSM cameras, press

the DSM camera folding button.

Enable on door unlock (infotainment

system)

,Iꢀ\RXꢀVHOHFWꢀœ6HWXSꢀƟꢀ9HKLFOHꢀ6HWWLQJVꢀƟꢀ

&RQYHQLHQFHꢀƟꢀ:HOFRPHꢀ0LUURUꢀƟꢀ(QDEOHꢀ

on Door Unlock’ on the infotainment

system,

śꢀ The DSM cameras will fold when

locking the doors.

- By pressing the door lock button (

on the smart key

)

- By touching the door lock/unlock

sensor on the front outside door

handles (the engraved part)

śꢀ The DSM cameras will unfold when

unlocking the doors.

- By pressing the door unlock button

(

) on the smart key

- By touching the door lock/unlock

sensor on the front outside door

handles (the engraved part)

5-39

Convenience features

NOTICE

Switching to wide view when

backing up

śꢀ You can control the DSM cameras

when the Start/Stop button is in the

OFF position, but excessive control

may discharge the vehicle’s battery.

śꢀ Always use the DSM camera folding

button to fold or unfold the DSM

cameras. Folding or unfolding the

cameras manually may damage the

motor. Also, vibrations or noises may

be emitted from the DSM cameras

whilst driving, indicating that the

gears are not engaged correctly.

In this case, engage the gears by

folding and unfolding the camera

again using the folding button.

śꢀ When cleaning the DSM camera

lenses or the DSM monitors, do not

spray the cleaner directly. Instead,

coat it on a soft towel or cloth. If you

spray the cleaner directly on the

lenses or monitors, the cleaner may

get inside, causing a malfunction.

śꢀ Do not scrape ice off the surface of

the DSM camera lenses. Doing so

may damage the lenses.

śꢀ Do not use warm or hot water to

remove snow or ice from the camera

lenses. Doing so may cause cracks in

the lenses.

ONE1051232

Information

śꢀ 7KHꢀJXLGHOLQHVꢀGLVSOD\HGꢀRQꢀWKHꢀ'60ꢀ

monitors whilst backing up indicate the

following points.

- 0.3 m away from the side of the

vehicle

- 0.5 m and 1 m away from the rear of

the vehicle

śꢀ The wide view will be deactivated when

you shift to N (Neutral) or D (Drive)

and drive at a speed of 10 km/h or

faster.

śꢀ The wide view appears only when the

wide view switch feature is activated

whilst backing up. In P (Park), N

ꢁ1HXWUDOꢂꢄꢀDQGꢀ'ꢀꢁ'ULYHꢂꢄꢀWKHꢀ'60ꢀ

monitors display the original view.

śꢀ If the DSM camera is jammed with

ice, do not adjust the camera by

force. Use an approved de-icer spray,

or move the vehicle to a warm place

and allow the ice to melt.

5-40

05

Setting wide view operation

Setting the DSM screen

brightness

With the Start/Stop button in the ON

position, on the infotainment system,

VHOHFWꢀœ6HWXSꢀƟꢀ'LVSOD\ꢀƟꢀ6FUHHQꢀ

Brightness’ to change the brightness.

śꢀ Automatic Brightness or Manual

Brightness adjustment (if equipped

with rain sensor)

śꢀ Screen Brightness (Day/Night) setting

(if the rain sensor is not equipped)

ONE1051233K

The infotainment system setup menu

may change after updates. For detailed

information, refer to the web manual of

the infotainment system.

Use the DSM camera selection lever (1)

to select L (Left) or R (Right).

śꢀ When you shift to R (Reverse), the

DSM monitors will display wide view.

śꢀ If you put the DSM camera selection

lever (1) in the centre, the DSM

DSM camera defroster

To turn on the defroster manually, turn

on the wiper or rear window defroster.

The feature will be activated for a certain

time.

monitors will not display wide view.

CAUTION

If there is an error in the digital side

mirror, the DSM monitors will not

display the rear view and a warning

message informing you to check

the DSM system will appear on the

instrument cluster. If this occurs, check

the surroundings using the inside

rearview mirror and immediately park

your vehicle at a safe place, and contact

an authorised HYUNDAI dealer.

5-41

Convenience features -> Digital side mirror (DSM) (if equipped) for Your Hyundai Ioniq SUV First Generation (2021-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals