05
Recalling memory positions
1. Shift to P (Park) whilst the Start/Stop
button is in the ON position.
2. Press the desired memory button (1
or 2). The system will beep once, and
then the driver’s seat position, outside
rearview mirror position, and head-
up display height will automatically
adjust to the stored positions.
Resetting the system
Take the following procedures to reset
integrated memory system, when it does
not operate properly.
Resetting integrated memory
system
1. Stop the vehicle and open the driver’s
door with the Start/Stop button in the
ON position and the vehicle shifted to
P (Park).
3. ‘Driver 1 (or 2) settings applied’ will
appear on the infotainment screen.
2. Adjust the driver’s seat and seatback
to the foremost position.
3. Press the memory button 1 (or 2)
and push forward the driver’s seat
movement switch over 2 seconds
simultaneously.
Information
śꢀ In order to adjust the memory button
(2) whilst adjusting the memory button
(1), press the memory button (1) to
pause the adjustment of (1), then press
memory button (2).
Whilst resetting integrated memory
system
śꢀ If you adjust the seat, rearview mirror,
head-up display whilst recalling the
stored positions, the manually adjusted
settings will be applied.
1. Resetting starts with a notification
sound.
2. The driver’s seat and seatback is
adjusted to the rearward position with
the notification sound.
3. The driver’s seat and seatback is
re-adjusted to the default position
(central position) with the notification
sound.
However, in the following cases, the
resetting procedure and the notification
sound may stop.
śꢀ The memory button is pressed.
śꢀ The seat control switch is operated.
śꢀ The gear is shifted out of P (Park).
śꢀ The driving speed exceeds 3 km/h.
śꢀ The driver’s door is closed.
5-25
English 
