See the illustration above for the detailed location of the detecting sensors.
Blind-Spot View Monitor settings
Setting features
With the engine on, select Setup > Vehicle > Driver Assistance > Driving Safety and then
enable Blind-Spot View Monitor in the infotainment system to turn on the Blind-Spot
View Monitor feature.
Blind-Spot View Monitor operation
Blind-Spot View Monitor will turn on and off when the turn signal is turned on and off.
2C_TurnSignalSwitchWithoutCallout
Operating conditions
When the left or right side turn signal turns on, the image in that direction is displayed on
the instrument cluster.
Off conditions
• When the turn signal turns off, the image on the instrument cluster will turn off.
• When the hazard warning flasher is on, Blind-Spot View Monitor will turn off, regardless
of the turn signal status.
• When other important warning is displayed on the instrument cluster, Blind-Spot View
Monitor may turn off.
Blind-Spot View Monitor malfunction
When Blind-Spot View Monitor is not working properly, or the instrument cluster display
flickers, or the camera image does not display properly, have the vehicle inspected by an
authorized HYUNDAI dealer.
WARNING
• The image shown on the instrument cluster may differ from the actual distance of the
object. Make sure to directly check the vehicle's surroundings for safety.
• Always keep the camera lens clean. If the lens is covered with foreign material, it may
adversely affect camera performance and Blind- Spot View Monitor may not operate
properly.
470 Driver Assistance System
English 
