ED English 4.qxp 10/4/2007 5:59 PM Page 3
Driving your vehicle
IGNITION SWITCH
ON
ON
ACC
The warning lights can be checked
before the engine is started. This is
the normal running position after the
engine is started.
START
LOCK
Do not leave the ignition switch ON if
the engine is not running to prevent
battery discharge.
START
Turn the ignition key to the START
position to start the engine. The
engine will crank until you release
the key; then it returns to the ON
position. The brake warning lamp
can be checked in this position.
OED046001
OED046002
Illuminated ignition switch
(if equipped)
Ignition switch and anti-theft
steering column lock
Whenever a door is opened, the igni-
tion switch will be illuminated for your
convenience, provided the ignition
switch is not in the ON position. The
light will go off approximately 30 sec-
onds after closing the door or when
the ignition switch is turned on.
Ignition switch position
LOCK
The steering wheel locks to protect
against theft. The ignition key can be
removed only in the LOCK position.
When turning the ignition switch to
the LOCK position, push the key
inward at the ACC position and turn
the key toward the LOCK position.
✽
NOTICE
If difficulty is experienced in turn-
ing the ignition key to the START
position, turn the steering wheel
right and left to release the tension
and then turn the key.
ACC (Accessory)
The steering wheel is unlocked and
electrical accessories are operative.
4 3
English 
