ED English 4.qxp 10/4/2007 6:01 PM Page 84
Driving your vehicle
WINDSHIELD DEFROSTING AND DEFOGGING
CAUTION
Do not use the
or
posi-
tion during cooling operation in
extremely humid weather. The
difference between the tempera-
ture of the outside air and that
of the windshield could cause
the outer surface of the wind-
shield to fog up, causing loss of
visibility. In this case, set the
mode selection knob to the
OED046064
OED046065
position and fan speed control
knob to the lower speed.
To defrost outside windshield
Manual climate control system
To defog inside windshield
1. Set the fan speed to the right posi-
tion.
• For maximum defrosting, set the tem-
perature control to the extreme
right/hot position and the fan speed
control to the highest speed.
1. Select any fan speed except
“OFF”.
2. Set the temperature to the
extreme hot position.
2. Select desired temperature.
3. Select the
position.
3. Select the
or
position.
• If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.
4. The outside (fresh) air and air con-
ditioning will be selected.
4. The outside (fresh) air and air con-
ditioning will be selected.
• Before driving, clear all snow and ice
from the windshield, rear window,
outside rear view mirrors, and all side
windows.
To reduce the probability of fogging up the inside of the windshield, the air
intake control is set to the outside (fresh) air position automatically if the
mode is selected to the
matically operate if the mode is selected to the
or
position and the air conditioning will auto-
position. If you don't want
• Clear all snow and ice from the hood
and air inlet in the cowl grill to
improve heater and defroster efficien-
cy and to reduce the probability of
fogging up inside of the windshield.
the air conditioning and the outside (fresh) air position, press the correspon-
ding button to cancel the operation.
4 84
English 
