2006-2012 Kia Ceed SUV Driving your vehicle -> Trip computer User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving your vehicle -> Trip computer for Your Kia Ceed SUV First Generation (2006-2012)

ED English 4.qxp 10/4/2007 6:00 PM Page 43  
Driving your vehicle  
Driving your vehicle  
TRIP COMPUTER (IF EQUIPPED)  
Mode  
Press the MODE button less than 1  
second to as follows;  
Calendar (if equipped)  
Elapsed time  
Average fuel consumption  
OED046020  
OED046021  
Trip computer is a microcomputer-  
controlled driver information gauge  
that displays information related to  
driving, such as estimated distance  
to empty, average speed and driving  
time on the LCD.  
Calendar and Clock  
(if equipped)  
Instantaneous fuel  
consumption  
Type A - without navigation  
The Calendar includes the day,  
month, year and the clock. The day,  
month and year shows only in the  
calendar mode. The clock is dis-  
played in every mode.  
Distance to empty  
If you press the /OFF button for  
less than 1second, the light of the  
LCD will turn off. If you press the  
/OFF button again, the lights of the  
LCD will turn on.  
Average vehicle speed  
4 43  
ED English 4.qxp 10/4/2007 6:00 PM Page 44  
Driving your vehicle  
Calendar setup mode  
Clock setup mode  
If you press the MODE button for If you press the MODE button for  
more than 2 seconds while in the cal- more than 2 seconds while in other  
endar mode, you will enter the calen- modes, you will enter the clock setup  
dar setup mode. The order of the mode. The order of the setup is  
setup is YEARMONTHDAY.  
HOURMINUTE.  
To go to the next setting press the To go to the next setting press the  
MODE button less than 1second and MODE button less than 1second and  
set the data using the UP() and set the data using the UP() and  
DOWN() button while the selected DOWN() button while the selected  
setting blinks.  
setting blinks.  
OED046022  
When the minute digit is lower than  
30 and the RESET button is pressed  
less than 1 second, the minute digit  
will change to :00 while the hour digit  
does not change.  
Type B - with navigation  
The calendar mode is displayed in  
every mode.  
To enter the calendar and clock set  
up mode while in other modes, press  
the MODE button for more than 2  
seconds. The order of the setup is  
HOURMINUTEYEARMONTH  
When the minute digit is over 30 and  
the RESET button is pressed less  
than 1 second, the minute digit will  
change to :00 while the hour digit  
increases 1 hour.  
DAY.  
To go to the next setting press the  
MODE button less than 1 second  
and set the data using the UP()  
and DOWN() button while the  
selected setting blinks.  
4 44  
ED English 4.qxp 10/4/2007 6:00 PM Page 45  
Driving your vehicle  
When the minute digit is lower than  
30 and the RESET button is pressed  
less than 1 second, the minute digit  
will change to 0 while the hour digit  
does not change.  
When the minute digit is over 30 and  
the RESET button is pressed less  
than 1 second, the minute digit will  
change to 0 while the hour digit  
increases 1 hour.  
OED046023  
OED046024  
Elapsed Time  
Average Fuel Consumption  
This mode indicates the total time This mode calculates the average  
traveled since the last elapsed time fuel consumption from the total fuel  
reset.  
used and the distance since the last  
average fuel consumption reset. The  
fuel used is calculated from the fuel  
consumption input. For an accurate  
calculation, drive more than 500 m  
(0.3 miles).  
To reset the elapsed time to 0:00,  
press the RESET button for more  
than 1 second, when the elapsed  
time is displayed.  
When it reaches 99:59, the time will  
start all over from 0:00.  
To reset the average fuel consump-  
tion to 0.0 l /100 km (MPG), press the  
RESET button for more than 1 sec-  
ond, when average fuel consumption  
is displayed.  
The display ranges from 0:00 to  
99:59.  
4 45  
ED English 4.qxp 10/4/2007 6:00 PM Page 46  
Driving your vehicle  
To change the average fuel con-  
sumption display unit (l /100km  
MPG), press the UP() button for  
more than 3 seconds.  
To change the instantaneous fuel  
consumption display unit (l /100km  
MPG), press the UP() button for  
more than 3 seconds.  
The display ranges from 0.0 to 99.9 l  
/100 km (MPG).  
The display ranges from 0.0 to 99.9 l  
/100 km (0.0 to 99.9 MPG).  
When you drive less than 30 km/h,  
“--” symbol will be displayed.  
OED046025  
Instantaneous Fuel  
Consumption  
This mode calculates the instanta-  
neous fuel consumption from the  
instantaneous fuel used and the dis-  
tance starting from ignition on. The  
instantaneous fuel consumption is  
calculated from the fuel consumption  
input. The display is updated every  
second.  
To reset the instantaneous fuel con-  
sumption, press the RESET button  
for more than 1 second, when the  
instantaneous fuel consumption is  
displayed.  
4 46  
ED English 4.qxp 10/4/2007 6:00 PM Page 47  
Driving your vehicle  
NOTICE  
ꢀ If the vehicle is not on level ground  
or the battery power has been  
interrupted, the “DISTANCE TO  
EMPTY” function may not oper-  
ate correctly.  
The trip computer may not regis-  
ter additional fuel if less than 6  
liters of fuel are added to the vehi-  
cle.  
ꢀ Trip computer provides a driver  
with supplemental information  
about the current operating status  
of your vehicle. So the estimated  
distance to empty can be changed  
according to operating status of  
your vehicle, average fuel con-  
sumption and previously driving  
style. Therefore the values  
approved or displayed on LCD for  
the first time can be different with  
your vehicle’s.  
OED046072  
OED046073  
Distance to Empty  
Average Vehicle Speed  
This mode indicates the estimated  
distance to empty based on the cur-  
rent fuel in the fuel tank. When the  
remaining distance is below 50 km  
(30 miles), a blinking "---" symbol will  
be displayed next to the distance to  
empty indicator.  
This mode calculates the average  
speed of the vehicle since the last  
average speed reset.  
To reset the average vehicle speed,  
press the RESET button for more  
than 1 second, when the average  
vehicle speed is displayed.  
To change the distance to empty dis-  
play unit (km miles), press the  
UP() button for more than 3 sec-  
onds.  
To change the instantaneous fuel  
consumption display unit (km/h ↔  
MPH), press the UP() button for  
more than 3 seconds.  
ꢀ The figure of distance to empty is  
estimated driving distance, so it  
can be different from the driving  
distance really is.  
The display ranges from 0 to 1500 km  
(0 to 1500 miles).  
The display ranges from 0 to 260kph  
(160mph)  
4 47  

Related Topics

Popular Owner Manuals