Driving your vehicle
Rear Cross-Traffic Collision Warning (RCCW)
䳜 The rear bumper is damaged, or
the sensor is out of the original
default position.
䳜 The vehicle height gets lower or
higher due to heavy loading in a
tailgate, abnormal tire pressure,
etc.
䳜 When the temperature of the
rear bumper is high.
䳜 When the sensors are blocked by
other vehicles, walls or parking-
lot pillars.
䳜 The vehicle drives on a curved
road.
䳜 The road pavement (or the
peripheral ground) abnormally
contains metallic components (i.e.
CAUTION
䳜 The system may not work prop
erly if the bumper has been
replaced or if a repair work has
been done near the sensor.
䳜 The detection area differs
according to the roads width. If
the road is narrow the system
may detect other vehicles in the
second next lane.
䳜 On the contrary, if the road is
very wide the system may not
detect other vehicles in the next
lane.
-
䳜 The system might be turned off
due to strong electromagnetic
waves.
possibly due to subway construc
-
tion).
䳜 There is a fixed object near the
vehicle, such as a guardrail.
䳜 While going down or up a steep
road where the height of the lane
is different.
䳜 Driving on a narrow road where
trees or grass or overgrown.
䳜 Driving in rural areas where the
sensor does not detect another
vehicle for an extended period of
time.
6
Limitations of the system
The driver must be cautious in the
below situations, because the sys
-
tem may not detect other vehicles
or objects in certain circumstances.
䳜 When a trailer or carrier is
installed.
䳜 The vehicle drives in inclement
weather such as heavy rain or
snow.
䳜 The sensor is polluted with rain,
snow, mud, etc.
䳜 The rear bumper where the sen
䳜 Driving on a wet road.
䳜 Driving on a road where the
guardrail or wall is in double
structure.
-
sor is located is covered with a
foreign object such as a bumper
sticker, a bumper guard, a bike
rack, etc.
䳜 A big vehicle is near such as a bus
or truck.
䳜 When the other vehicle
approaches very close.
6
133
English 
