2019-2026 Lexus UX SUV Operating the lights and wipers -> Headlight switch User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Operating the lights and wipers -> Headlight switch for Your Lexus UX SUV First Generation (2019-2026)

198
4-3. Operating the lights and wipers
4-3.Operating the lights and wipers
Operating the switch turns on
the lights as follows:
U.S.A.
Canada
1 The side marker, parking, tail,
license plate, instrument panel
lights, and daytime running lights
(P.198) turn on.
2 The headlights and all the
lights listed above (except daytime
running lights) turn on.
3 The headlights, daytime run-
ning lights (P.198) and all the
lights listed above turn on and off
automatically.
4 (U.S.A.) Off
■ AUTO mode can be used when
The power switch is in ON.
■ Daytime running light system
● The daytime running lights illuminate the
parking lights and illuminate brighter than
the parking lights.
● To make your vehicle more visible to
other drivers during daytime driving, the
daytime running lights turn on automati-
cally when all of the following conditions
are met. (The daytime running lights are
not designed for use at night.)
• The hybrid system is started
• The parking brake is released
• The headlight switch is in the or
(when the surroundings are bright) posi-
tion
The daytime running lights remain on after
they illuminate due to the conditions above,
even if the parking brake is set again.
● For the U.S.A.: Daytime running lights
can be turned off by operating the head-
light switch to position.
● Compared to turning on the headlights,
the daytime running light system offers
greater durability and consumes less
electricity, so it can help improve fuel
economy.
■ Headlight control sensor
The sensor may not function properly if an
object is placed on the sensor, or anything
that blocks the sensor is affixed to the wind-
shield.
Doing so interferes with the sensor detect-
ing the level of ambient light and may cause
the automatic headlight system to malfunc-
tion.
Headlight switch
The headlights can be operated
manually or automatically.
Turning on the headlights
A
B
199
4-3. Operating the lights and wipers
4
Driving
■ Automatic light off system
● When the headlights come on: The head-
lights and tail lights turn off 30 seconds
after the driver’s door is opened and
closed if the power switch is turned to
OFF. (The lights turn off immediately if
on the key is pressed after all the
doors are locked.)
● When only the tail lights come on: The tail
lights turn off automatically if the power
switch is turned to OFF. and the driver’s
door is opened.
Except for Canada: To turn the lights on
again, turn the power switch to ON, or turn
the light switch off once and then back to
or .
For Canada: To turn the lights on again, turn
the power switch to ON, or turn the light
switch to once and then back to
or .
■ Automatic headlight leveling system (if
equipped)
The level of the headlights is automatically
adjusted according to the number of pas-
sengers and the loading condition of the
vehicle to ensure that the headlights do not
interfere with other road users.
■ Windshield wiper linked headlight illu-
mination
When driving during daytime with the
headlight switch turned to position, if
the windshield wipers are used, the head-
lights will turn on automatically after several
seconds to help enhance the visibility of
your vehicle.
■ 12-volt battery-saving function
In order to prevent the 12-volt battery of the
vehicle from discharging, if the headlights
and/or tail lights are on when the power
switch is turned off the 12-volt battery sav-
ing function will operate and automatically
turn off all the lights after approximately 20
minutes. When the power switch is turned
to ON, the 12-volt battery-saving function
will be disabled.
When any of the following are performed,
the 12-volt battery-saving function is can-
celed once and then reactivated. All the
lights will turn off automatically 20 minutes
after the 12-volt battery-saving function has
been reactivated:
● When the headlight switch is operated
● When a door is opened or closed
■ Welcome light illumination control
The parking and tail lights automatically
turn on at night when the doors are
unlocked using the entry function or wire-
less remote control if the light switch is in
the position.
■ If “Headlight System Malfunction Visit
Your Dealer” is displayed on the multi-
information display
The system may be malfunctioning. Have
the vehicle inspected by your Lexus dealer.
■ Customization
Settings (e.g. light sensor sensitivity) can be
changed. (Customizable features:
P.460)
NOTICE
■ To prevent 12-volt battery discharge
Do not leave the lights on longer than
necessary when the hybrid system is not
operating.
200
4-3. Operating the lights and wipers
1 With the headlights on, push the
lever away from you to turn on the
high beams.
Pull the lever toward you to the center
position to turn the high beams off.
2 Pull the lever toward you and
release it to flash the high beams
once.
You can flash the high beams with the
headlights on or off.
When any of the following conditions is
met, while the headlights (low beam)
are on, the cornering lights will addi-
tionally turn on and light up the direc-
tion of movement for the vehicle. This is
to ensure excellent visibility when
either driving at intersections or park-
ing at night.
The steering wheel is operated
The turn signal lever is operated
The shift position is in R (both left
and right side cornering lights)
■ Cornering light control
● The lights illuminate when the vehicle
speed is approximately 19 mph (30
km/h) or less. However, the lights turn off
when the vehicle speed increases to
approximately 22 mph (35 km/h) or
more.
● After the lights remain illuminated for 30
minutes, they automatically turn off.
Turning on the high beam head-
lights
Cornering lights (if equipped)

Related Topics

Popular Owner Manuals