2019-2026 Lexus UX SUV Operating the lights and wipers -> Windshield wipers and washer User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Operating the lights and wipers -> Windshield wipers and washer for Your Lexus UX SUV First Generation (2019-2026)

205
4-3. Operating the lights and wipers
4
Driving
Operating the lever operates
the wipers or washer as follows:
Intermittent windshield wipers with
interval adjuster
1
*1
or
*2
Off
2
*1
or
*2
Intermittent
operation
3
*1
or
*2
Low speed oper-
ation
4
*1
or
*2
High speed oper-
ation
5
*1
or
*2
Temporary oper-
ation
*1
: For the U.S.A.
*2
: For Canada
Wiper intervals can be adjusted when
intermittent operation is selected.
6
Increases the intermittent wind-
shield wiper frequency
7
Decreases the intermittent wind-
shield wiper frequency
8
Washer/wiper dual opera-
tion
Pulling the lever operates the wipers and
washer.
The wipers will automatically operate a
couple of times after the washer squirts.
Windshield wipers and
w
asher
Operating the lever can change
wiper operation to automatic/man-
ual or squirt washer fluid.
NOTICE
■ When the windshield is dry
Do not use the wipers, as they may dam-
age the windshield.
Operating the wiper lever
206
4-3. Operating the lights and wipers
Vehicles with headlight cleaners:
When the power switch is in ON and the
headlights are on, if the lever is pulled, the
headlight cleaners will operate once. After
this, the headlight cleaners will operate
every 5th time the lever is pulled.
Rain-sensing windshield wipers
When AUTO is selected, the wipers
will operate automatically when the
sensor detects falling rain. The system
automatically adjusts wiper timing in
accordance with rain volume and vehi-
cle speed.
1
*1
or
*2
Off
2 Rain-sensing operation
3
*1
or
*2
Low speed oper-
ation
4
*1
or
*2
High speed oper-
ation
5
*1
or
*2
Temporary oper-
ation
*1
: For the U.S.A.
*2
: For Canada
When AUTO is selected, the sensor
sensitivity can be adjusted by turning
the switch ring.
6 Increases the sensitivity
7 Decreases the sensitivity
8 Washer/wiper dual opera-
tion
Pulling the lever operates the wipers and
washer.
The wipers will automatically operate a
couple of times after the washer squirts.
(After operating several times, the wipers
operate once more time after a short delay
to prevent dripping. However, the dripping
prevention does not operate while the
vehicle is moving.)
Vehicles with headlight cleaners: When
the power switch is in ON and the head-
lights are on, if the lever is pulled, the head-
light cleaners will operate once. After this,
the headlight cleaners will operate every
207
4-3. Operating the lights and wipers
4
Driving
5th time the lever is pulled.
■ The windshield wipers and washer can
be operated when
The power switch is in ON.
■ Using the voice control system (if
equipped)
The following operations can be performed
using the voice control system:
● Operating the windshield wipers only
once
● Operating the windshield cleaning
washer (it can be performed only when
the vehicle is stopped)
For details regarding the voice control sys-
tem, refer to “MULTIMEDIA OWNER’S
MANUAL”.
■ Effects of vehicle speed on wiper opera-
tion (vehicles with rain-sensing wind-
shield wipers)
Vehicle speed affects the Intermittent wiper
interval.
■ Raindrop sensor (vehicles with rain-
sensing windshield wipers)
● The raindrop sensor judges the amount
of raindrops.
An optical sensor is adopted. It may not
operate properly when sunlight from the
rising or setting of the sun intermittently
strikes the windshield, or if bugs, etc. are
present on the windshield.
● If the wiper switch is turned to the AUTO
position while the power switch is in ON,
the wipers will operate once to show that
AUTO mode is activated.
● If the temperature of the raindrop sensor
is 194°F (90°C) or higher, or 5°F (-
15°C) or lower, automatic operation may
not occur. In this case, operate the wipers
in any mode other than AUTO mode.
■ If no windshield washer fluid sprays
Check that the washer nozzles are not
blocked, if there is washer fluid in the
washer fluid tank.
■ Front door opening linked windshield
wiper stop function
When AUTO is selected and the wind-
shield wipers are operating, if a front door is
opened, the operation of the windshield
wipers will be stopped to prevent anyone
near the vehicle from being sprayed by
water from the wipers, provided the vehicle
is stopped with the parking brake applied or
the shift position in P. When the front door
is closed, wiper operation will resume.
WARNING
■ Caution regarding the use of wind-
shield wipers in AUTO mode (vehi-
cles with rain-sensing windshield
wipers)
The windshield wipers may operate
unexpectedly if the sensor is touched or
the windshield is subject to vibration in
AUTO mode. Take care that your fin-
gers, etc. do not become caught in the
windshield wipers.
■ Caution regarding the use of washer
fluid
When it is cold, do not use the washer
fluid until the windshield becomes warm.
The fluid may freeze on the windshield
and cause low visibility. This may lead to
an accident, resulting in death or serious
injury.
NOTICE
■ When the washer fluid tank is empty
Do not operate the switch continually as
the washer fluid pump may overheat.
■ When a nozzle becomes blocked
In this case, contact your Lexus dealer.
Do not try to clear it with a pin or other
object. The nozzle will be damaged.
208
4-3. Operating the lights and wipers
When the windshield wipers are not
being used, they retract to below the
hood. To enable the windshield wipers
to be lifted when parking in cold condi-
tions or when replacing a windshield
wiper insert, change the rest position of
the windshield wipers to the service
position using the wiper lever.
■ Raising the wipers to the service
position
Within approximately 45 seconds of
turning the power switch off, move the
wiper lever to the (U.S.A.) or
(Canada) position and hold it for
approximately 2 seconds or more.
The wipers will move to the service posi-
tion.
■ Lifting the windshield wipers
While holding the hook portion of
the wiper arm, lift the windshield wiper
from the windshield.
■ Lowering the windshield wipers to the
retracted position
With the windshield wipers placed on the
windshield, turn the power switch to ON
and then move the wiper lever to an operat-
ing position. When the wiper switch is
turned off, the windshield wipers will stop at
the retracted position. Even if the wipers
deviate while the power switch is OFF, the
wipers will return to the normal position.
NOTICE
■ To prevent 12-volt battery discharge
Do not leave the wipers on longer than
necessary when the hybrid system is off.
Changing the windshield wiper
rest position/Lifting the wind-
shield wipers
A
209
4-3. Operating the lights and wipers
4
Driving
■ Using the voice control system (if
equipped)
The windshield wipers can be moved to the
service position using the voice control sys-
tem.
(Operation is possible only when the vehi-
cle is stopped with the wiper switch in
*1
or
*2
)
For details regarding the voice control sys-
tem, refer to the “MULTIMEDIA
OWNER’S MANUAL”.
*1
: For the U.S.A.
*2
: For Canada
Operating the switch operates
the rear wiper as follows:
1
*1
or
*2
Off
2
*1
or
*2
Intermittent
operation
3
*1
or
*2
Normal operation
*1
: For the U.S.A.
*2
: For Canada
NOTICE
■ When lifting the windshield wipers
● Do not lift the windshield wipers when
they are in the retracted position
below the hood. Otherwise, they may
contact the hood, possibly resulting in
damage to a windshield wiper and/or
the hood.
● Do not lift a windshield wiper by the
wiper blade. Otherwise, the wiper
blade may be deformed.
● Do not operate the wiper lever when
the windshield wipers are lifted. Oth-
erwise, the windshield wipers may
contact the hood, possibly resulting in
damage to the windshield wipers
and/or hood.
Rear window wiper and
w
asher
The rear window wiper and washer
can be used by operating the lever.
NOTICE
■ When the rear window is dry
Do not use the wiper, as it may damage
the rear window.
Operating the wiper lever

Related Topics

Popular Owner Manuals