Get MOBILITY Guide for Mini Cooper 2 Door Third Generation (2016-2023)

MOBILITY

Charging the vehicle

–

Level 2 charging via a Level 2 charging

station.

Vehicle features and options

Charging via a DC charging station.

This chapter describes all standard, country-

specific and optional features offered with

the series. It also describes features and

functions that are not necessarily available

in your vehicle, e.g., due to the selected op-

tions or country versions. This also applies

to safety-related functions and systems.

When using these functions and systems,

the applicable laws and regulations must be

observed.

Level 1 charging is possible via a household

socket with a voltage of 120 volts.

For optimal use of the energy from the

power mains, charging at a charging sta-

tion, for instance BMW Wallbox, is recom-

mended.

Charge current

General information

The charge current strength is indicated in

amperes.

Concept

The vehicle cannot automatically detect the

maximum permissible charge current

strength of the power grid during charging

via a household socket or charging station.

The vehicle can be charged using various

charging cables at charging stations or

household sockets. Control and monitoring

of the charging process are handled com-

pletely automatically. The charge current

strength can be set via the Central Informa-

tion Display (CID).

Level 1 charging

Prior to the first Level 1 charging at your

own household socket, or at other house-

hold sockets, the permitted charge current

strength must be determined by a qualified

electrician, for example.

General information

The charge current strength for

Level 1 charging, refer to page 224, can be

adjusted in the vehicle in three levels.

High-voltage battery

The high-voltage battery is used as an en-

ergy accumulator. The high-voltage battery

can be charged by energy recovery during

the trip or via the power grid.

At delivery, the charge current for

Level 1 charging is set to the lowest level.

Depending on the country-specific version,

one of several ampere ratings is printed on

the Level 1 charging cable. This ampere rat-

ing is the limit which must be adhered to

for the vehicle if the charge current is set to

the highest level. Depending on the charg-

ing cable, the charge current strength may

vary when lower levels are set.

In order to operate the high-voltage battery

optimally, charge the vehicle regularly and

fully using a compatible charger.

When charging via the power grid, you can

chose between the following variants.

–

Level 1 charging via a household socket.

218

Online Edition for Part no. 01405A02680 - II/20

Charging the vehicle

MOBILITY

Overview

Imprint on the charging cable

Charge current setting

"Max."

6 A

"Reduced"

6 A

"Low"

6 A

8 A

6 A

10 A

12 A

15 A

10 A

12 A

15 A

7.5 A

9 A

6 A

11.25 A

7.5 A

Depending on the charge current setting,

the charging duration changes.

–

Household socket and connected cir-

cuits.

Warning

Safety information

Damaged or worn charging devices, for in-

stance worn contacts, can heat up. There

is a risk of fire. Only use charging devices

that are in good condition.

Warning

Improper working with electrical current

can lead to an electric shock due to high

voltages or high currents. There is a risk

of fire or danger to life. Observe the gen-

eral safety regulations when working with

electrical current.

Warning

Contact with live components can lead to

an electric shock. High voltage is present

at the charging connection. There is a risk

of injury or danger to life.

The manufacturer of your vehicle recom-

mends that work on the charging connec-

tion, for instance cleaning, be performed

by a dealer’s service center or another

qualified service center or repair shop.

Warning

A faulty and incorrectly designed charging

device at the charging location can cause

damage to the vehicle and overload the

power mains at the charging location.

There is a risk of fire and a risk of injury.

The manufacturer of your vehicle recom-

mends that, prior to your first use of a

charging location, you have the compati-

bility of the following components con-

firmed:

Charging cable

General information

Use a Level 1 charging cable, Level 2 charg-

ing cable or the permanently installed

charging cable of a charging station to

charge the vehicle.

–

Charging cable.

Charging station.

219

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Charging the vehicle

Different charging cables can be required

depending on the country.

When a Level 1 charging cable is used, the

efficiency values may differ from those

stated on the energy label.

Safety information

Level 2 charging cable

The Level 2 charging cable makes it possi-

ble to quickly recharge at sockets of desig-

nated Level 2 charging stations using a spe-

cial plug. Charging is performed with

alternating current at designated

Level 2 charging stations. The charging

process can be completed faster than at

household sockets.

Warning

Non-compatible charging cables or unsuit-

able charging stations can heat up and

cause damage to the vehicle. There is a

risk of fire. Use charging cables or charg-

ing stations for charging that are suitable

for the respective vehicle type.

A dealer's service center will be glad to

provide information about suitable charg-

ing cables.

A charge current strength of up to maxi-

mum 16 A is possible.

The charging cable may be permanently in-

stalled at the charging station.

Warning

DC charging cable

Improper use of the charging cable can

prevent charging and lead to damage, for

instance cable fire. There is a risk of fire.

Use the charging cable only for charging

the vehicle, and do not extend it using ca-

bles or adapters.

The DC charging cable that is permanently

installed at the charging station makes is

possible to charge at DC charging stations.

Charging is performed with direct current

at designated DC charging stations. At the

higher capacity current connection of a DC

charger station the charging time is signifi-

cantly lower than with a household socket

or a Level 2 charging station.

Warning

Damaged charging cables can heat up or

lead to an electric shock. There is a risk of

fire or a risk of injury. Use undamaged

charging cables only.

During charging at a DC charging station,

an indication in the instrument cluster, re-

fer to page 225, is displayed.

The DC charging cable is also referred to as

Level 3 DC charging cable.

Level 1 charging cable

The vehicle is supplied with a

Level 1 charging cable.

Level 1 charging cables can be used to

charge the vehicle from grounded house-

hold sockets. Charging at household socket

connections is performed with alternating

current.

220

Online Edition for Part no. 01405A02680 - II/20

Charging the vehicle

MOBILITY

lock the vehicle. Set the parking brake, if

needed.

Storage

1. Tap on the charging socket flap, arrow.

The charging socket flap opens.

The Level 1 charging cable is located in a

bag in the cargo area.

Store charging cable again in the bag after

use. Attach the bag to the designated eyelet.

2. Remove the charging socket lid, arrow.

If required, store the charging cable with

the installed plug cover to prevent moisture

in the charging cable plug.

Connecting

Charging socket flap

3. Remove the cover of the charging cable

plug, if needed.

4. Connect Level 1 charging cable to the

household socket or Level 2 charging

cable to the port on the charging station.

5. Insert the appropriate charging cable

plug, and push it in until it engages.

The charging socket flap is located on the

right side of the vehicle.

When charging at a charging station, follow

the instructions at the charging station.

Always keep charging socket clean and un-

obstructed.

Removing

Keep the charging socket flap closed when

the charging socket is not used.

When the charging process is active and

the vehicle is locked, the charging cable is

automatically locked. Unlock the vehicle be-

fore removing the cable.

Connecting the charging cable

To connect, engage selector lever posi-

tion P, deactivate drive-ready state, and un-

When the charging process is completed,

the charging cable is automatically un-

locked.

221

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Charging the vehicle

If necessary, clean the area between the

charging socket flap and charging socket,

for instance from snow, before removing it.

Electrical unlocking of the

charging cable

Concept

1. Unlock the vehicle with the vehicle key

if it is locked.

In the following situations, the charging ca-

ble can be unlocked and removed electroni-

cally:

Charging cable is unlocked.

2. Press the release button on the handle,

arrow 1, and grasp the charging cable at

the gripping areas.

–

When the vehicle is locked.

When a charging station is defective.

Charging process is interrupted.

Unlocking

Via the Central Information Display (CID):

1.

"My MINI"

2. "Plan charging/climate control"

3. "Settings charging current"

4. "Unlock charging cable"

3. Remove the charging cable from the

charging socket, arrow 2.

Charging process

4. Put the charging socket lid back on.

General information

5. Press on the charging socket flap until it

engages.

At high temperatures, the high-voltage bat-

tery is initially cooled. There may be a delay

before charging starts. If the high-voltage

battery is discharged, cooling of the high-

voltage battery may not be possible. The

charging process cannot be started.

6. Attach cover of the charging cable plug,

if needed.

7. Disconnect Level 1 charging cable from

the household socket or Level 2 charg-

ing cable from the port on the charging

station as applicable.

If the Level 1 charging cable is exposed to

high temperatures and direct sunlight, this

may interrupt the charging process. Charg-

ing will resume automatically.

8. Stow the charging cable.

At a charging station, insert the perma-

nently installed charging cable in the

place provided for it.

The charging process may take longer under

extremely low or high temperatures.

222

Online Edition for Part no. 01405A02680 - II/20

Charging the vehicle

MOBILITY

Safety information

Charging status display

Indicator light at the charging socket

Warning

Improper use of the power mains connec-

tion can lead to damage, for instance cable

fire. There is a risk of injury or risk of

damage to property. Use the charging ca-

ble only for charging the vehicle, and do

not extend it using cables or adapters.

Warning

An indicator light is located on the charging

socket.

If the charge current strength is adjusted

incorrectly, the power mains of the house-

hold socket can be overloaded and over-

heat. There is a risk of fire. Adjust the

charge current strength to the power

mains prior to charging on household

sockets. With unknown power networks,

set on the lowest level.

Charging status

Light

Charging status

White

Charging cable can be con-

nected or removed.

Flashes or-

ange

Charging process is being

prepared.

Starting the charging process

1. Engage selector lever position P. Set the

parking brake, if needed.

Yellow

Charging process paused.

Charging process is active.

Flashes yel-

low

2. For planning the charging process, refer

to page 224.

Flashes red

rapidly

Fault in the charging proc-

ess.

3. Switch off drive-ready state.

4. Connect Level 1 charging cable to the

household socket or Level 2 charging

cable to the port on the charging station.

Green

Charging process is com-

pleted.

5. Open the charging socket flap.

When the vehicle is locked, the indicator

light goes out after some time.

6. Connect the charging cable to the vehi-

cle, refer to page 221.

When the vehicle is unlocked, the yellow

indicator light flashes continuously. The

other indicator lights go out after some

time.

7. Lock vehicle if it is unlocked.

Press the button on the vehicle key to

check the charging state. The charging sta-

tus is indicated on the indicator light. In

some cases the vehicle is locked.

223

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Charging the vehicle

Additional messages about the charging sta-

tus, for instance the probable end of charg-

ing or the planned departure time, can be

shown in the instrument cluster or on the

Control Display.

Setting the time window for favorable-

rate

Via the Central Information Display (CID):

1.

"My MINI"

2. "Plan charging/climate control"

3. "Set low cost time slot"

4. Set rate begin.

Planning the charging process

General information

5. Set rate end.

The charging process can be adapted to

constraints, for instance the cost of electric-

ity. The vehicle controls the charging proc-

ess in such a way that the charging process

is completed if possible at the departure

time. A departure time must be set for this

purpose, refer to page 225.

The vehicle can also start the charging proc-

ess before the selected time window begins

or end it after the selected time window fin-

ishes. The starting point of the charging

process is adjusted so the vehicle can be as

fully charged as possible and, if applicable,

its climate adjusted by the departure time.

The following settings are available:

–

Immediate charging.

Setting the charge current for

charging via a Level 1 charging cable

Depending on the electrical mains, the vehi-

cle must be charged with a different charge

current strength, refer to page 218.

Set time window for favorable charging.

Set the charge current for charging via a

Level 1 charging cable.

If drive-ready state is switched off, changes

can be made via the Central Information

Display (CID). Settings for the stationary cli-

mate control and charging process are also

accepted for planned departure times.

Via the Central Information Display (CID):

1.

"My MINI"

2. "Plan charging/climate control"

3. "Settings charging current"

4. "Level 1 (120V)"

Setting the charging mode

Via the Central Information Display (CID):

Settings are stored. When you change

charging locations you also might need to

change the setting for charging.

1.

"My MINI"

2. "Plan charging/climate control"

3. Select the desired setting:

Set the charge current strength at other

household sockets to the lowest level.

–

"Charge immediately": the charging

process starts as soon as the charg-

ing cable is connected.

Stopping the charging process

–

"Charge for departure time": if a de-

parture time is set, a time window

for charging with a favorable elec-

tricity rate can be set.

The charging process can be stopped at any

time by removing the charging cable and

continued at a later time by connecting the

charging cable. This enables, for instance

the use of other loads on the power connec-

tion or prevents simultaneous high power

from multiple loads.

224

Online Edition for Part no. 01405A02680 - II/20

Charging the vehicle

For removing the charging cable, refer to

MOBILITY

Display Meaning

page 221.

Ring orange: the charging proc-

ess is being prepared.

Continuing the charging process

Ring yellow animated: the

charging process is active or it

will start at the set time.

If the charging process is interrupted, for

instance through a temporary power failure,

the charging process is automatically con-

tinued after the interruption.

Ring yellow: the charging proc-

ess pauses.

Ring red: fault in the charging

process.

Terminating the charging process

1. Remove the charging cable from the ve-

hicle, refer to page 221.

Ring green: the charging proc-

ess is completed.

2. Stow the charging cable as required.

3. Close the charging socket flap.

4. Lock vehicle if it is unlocked.

End of charging time or set de-

parture time.

DC charging active on a DC

charging station.

Displays in the instrument

cluster

Departure time set.

The charge state indicator light, refer to

page 120, shows the charge state of the

high-voltage battery in the instrument clus-

ter, if the standby state or drive-ready state

is switched on. If all bars are filled, the

high-voltage battery is fully charged.

Climate control activated at de-

parture time.

Flashing: ventilation active.

Flashing: heating active.

Flashing: cooling active.

Even if no bars are filled, the high-voltage

system is still under high voltage.

Information regarding the charging process

is shown on the charging screen.

Departure time

Concept

For optimum range and climate control, the

departure time can be set before parking

the vehicle.

225

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Charging the vehicle

3. "Set departure time"

General information

Set departure times are displayed.

With a set departure time, the vehicle is

preheated or precooled during the charging

process if climate control is set. Climate

control output is reduced during the trip.

This increases the range during electric

driving.

4. For example activate "Departure time 1".

Up to two departure times can be activated.

The set departure time will be deactivated,

if the departure time was ignored three

times in a row.

The following settings are possible for de-

parture time:

–

Climate control for departure time.

Climate control

Planning of up to two regular departure

times.

The following settings for vehicle air condi-

tioning are possible:

If drive-ready state is switched off, changes

can be made via the Central Information

Display (CID). Settings for climate control

and charging process are also applied for

scheduled departure times.

–

Activate stationary climate control im-

mediately, refer to page 184.

The range is reduced if stationary cli-

mate control is activated without a

charging cable connected.

Climate control for departure time

Via the Central Information Display (CID):

–

Planned climate control at the set depar-

ture time, refer to page 185.

1.

"My MINI"

If a Mode 2 charging cable is used, the

high-voltage battery may not be fully

charged at departure time.

2. "Plan charging/climate control"

3. "Precondition for departure"

Setting the departure time

Via the Central Information Display (CID):

Discharged high-voltage and

vehicle battery

1.

"My MINI"

2. "Plan charging/climate control"

3. "Set departure time"

General information

In addition to the high-voltage battery, the

vehicle has a 12 volt vehicle battery, which

is required for operation of the onboard

electronics.

4. Set the desired days of the week, if

needed.

5. Set the desired time.

With a discharged vehicle battery, no oper-

ation of the vehicle is possible.

Up to three departure times can be set.

Activating the departure time

Via the Central Information Display (CID):

1.

"My MINI"

2. "Plan charging/climate control"

226

Online Edition for Part no. 01405A02680 - II/20

Wheels and tires

MOBILITY

Wheels and tires

Tire inflation pressure

specifications

Vehicle features and options

This chapter describes all standard, country-

specific and optional features offered with

the series. It also describes features and

functions that are not necessarily available

in your vehicle, e.g., due to the selected op-

tions or country versions. This also applies

to safety-related functions and systems.

When using these functions and systems,

the applicable laws and regulations must be

observed.

In the tire inflation pressure table

The tire inflation pressure table, refer to

page 228, contains all tire inflation pres-

sure specifications for the specified tire

sizes at the ambient temperature. The tire

inflation pressure values apply to tire sizes

approved by the manufacturer of the vehicle

for the vehicle type.

To identify the correct tire inflation pres-

sure, please note the following:

–

Tire sizes of your vehicle.

Tire inflation pressure

Maximum permitted driving speed.

General information

The tire characteristics and tire inflation

pressure influence the following:

Checking the tire inflation pressure

General information

–

The service life of the tires.

Road safety.

Tires heat up while driving. The tire infla-

tion pressure increases with the tire tem-

perature.

Driving comfort.

Tires have a natural, consistent loss of tire

inflation pressure.

Fuel consumption.

The displays of inflation devices may under-

read by up to 0.1 bar/2 psi.

Safety information

Warning

Checking using tire inflation pressure

specifications in the tire inflation

pressure table

The tire inflation pressure specifications in

the tire inflation pressure table only relate

to cold tires or tires at the same tempera-

ture as the ambient temperature.

A tire with too little or no tire inflation

pressure may heat up significantly and

sustain damage. This will have a negative

impact on aspects of handling, such as

steering and braking response. There is a

risk of accident. Regularly check the tire

inflation pressure, and correct it as

needed, for instance twice a month and be-

fore a long trip.

Only check the tire inflation pressure levels

when the tires are cold, i.e.:

–

Driving range of max. 1.25 miles/2 km

has not been exceeded.

227

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Wheels and tires

–

If the vehicle has not moved again for at

least 2 hours after a trip.

Tire pressure values

COOPER SE

1. Determine the intended tire inflation

pressure levels for the mounted tires.

Tire size

Pressure specifications

in bar/PSI

2. Check the tire inflation pressure in all

four tires, using a pressure gage, for ex-

ample.

Specifications

in bar/PSI with

cold tires

3. Correct the tire inflation pressure if the

actual tire inflation pressure deviates

from the intended tire inflation pres-

sure.

195/55 R 16 87 2.4 / 35

W

2.2 / 32

2.4 / 35

4. Check whether all valve caps are

screwed onto the tire valves.

195/55 R 16 87

H M+S

After correcting the tire inflation

pressure

For run-flat tires: reinitialize run-flat tires.

205/45 R 17 88 2.6 / 38

V XL A/S

205/45 R 17 88

W XL

For the Tire Pressure Monitor TPM: reset

the Tire Pressure Monitor TPM.

205/45 R 17 88

V XL M+S

Tire pressures

175/60 R 16 86 2.8 / 41

H XL M+S

2.6 / 38

To achieve optimum driving comfort, note

the tire inflation pressure specifications in

the Tire inflation pressure table, refer to

page 228, and adjust as needed.

185/50 R 17 86

H XL M+S

These pressure values can also be found on

the tire inflation pressure label on the driv-

er's door pillar.

Tire identification marks

Do not exceed a speed of 100 mph/

160 km/h.

Tire size

205/45 R 17 84 V

205: nominal width in mm

45: aspect ratio in %

R: radial tire code

17: rim diameter in inches

84: load rating, not for ZR tires

V: speed rating, before the R on ZR tires

228

Online Edition for Part no. 01405A02680 - II/20

Wheels and tires

MOBILITY

Manufacture date

Maximum tire load

You can find the manufacture date of the

tire on the tire's sidewall.

Maximum tire load is the maximum permis-

sible weight for which the tire is approved.

Locate the maximum tire load on the tire

sidewall and the Gross Axle Weight Rating

– GAWR – on the certification label on the

driver’s door pillar. Divide the tire load by

1.1. It must be greater than one-half of the

vehicle’s Gross Axle Weight Rating –

GAWR. Note, front vs. rear GAWR and tire

loads, respectively.

Designation

Manufacture date

DOT … 0120

1st week 2020

Uniform Tire Quality Grading

Quality grades can be found where applica-

ble on the tire sidewall between tread

shoulder and maximum section width.

E.g.: Treadwear 200; Traction AA; Tempera-

ture A

Speed letter

Designation Maximum speed

DOT Quality Grades

Treadwear

Q

R:

S

up to 100 mph/160 km/h

up to 106 mph/170 km/h

up to 112 mph/180 km/h

up to 118 mph/190 km/h

up to 131 mph/210 km/h

up to 150 mph/240 km/h

up to 167 mph/270 km/h

up to 186 mph/300 km/h

Traction AA A B C

Temperature A B C

All passenger vehicle tires must conform to

Federal Safety Requirements in addition to

these grades.

T

H

V

W

Y

Treadwear

The treadwear grade is a comparative rating

based on the wear rate of the tire when

tested under controlled conditions on a

specified government test course. E.g., a

tire graded 150 would wear one and one-

half, 1 g, times as well on the government

course as a tire graded 100. The relative

performance of tires depends upon the ac-

tual conditions of their use, however, and

may depart significantly from the norm due

to variations in driving habits, service prac-

tices and differences in road characteristics

and climate.

Tire Identification Number

DOT-Code: DOT xxxx xxx 0120

xxxx: manufacturer code for the tire brand

xxx: tire size and tire design

0120: tire age

Tires with DOT codes meet the guidelines

of the U.S. Department of Transportation.

Tire age

Traction

Recommendation

Regardless of the tire tread, replace tires at

least every 6 years.

The traction grades, from highest to lowest,

are AA, A, B, and C.

Those grades represent the tire's ability to

stop on wet pavement as measured under

229

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Wheels and tires

controlled conditions on specified govern-

ment test surfaces of asphalt and concrete.

A tire marked C may have poor traction per-

formance.

M+S

Winter and all-season tires with better cold

weather performance than summer tires.

The traction grade assigned to this tire is

based on straight-ahead braking traction

tests, and does not include acceleration,

cornering, hydroplaning, or peak traction

characteristics.

Tire tread

Summer tires

Do not drive with a tire tread of less than

0.12 in/3 mm, otherwise there is an in-

creased risk of hydroplaning.

Temperature

The temperature grades are A, the highest,

B, and C, representing the tire's resistance

to the generation of heat and its ability to

dissipate heat when tested under controlled

conditions on a specified indoor laboratory

test wheel. Sustained high temperature can

cause the material of the tire to degenerate

and reduce tire life, and excessive tempera-

ture can lead to sudden tire failure. The

grade C corresponds to a level of perform-

ance which all passenger car tires must

meet under the Federal Motor Vehicle

Safety Standard No. 109. Grades Band A

represent higher levels of performance on

the laboratory test wheel than the minimum

required by law.

Winter tires

Do not drive with a tire tread of less than

0.16 in/4 mm, as such tires are less suitable

for winter operation.

Minimum tread depth

Warning

Wear indicators are distributed around the

tire's circumference and have the legally re-

quired minimum height of 0.063 in-

ches/1.6 mm.

The temperature grade for this tire is es-

tablished for a tire that is properly inflated

and not overloaded. Excessive speed, un-

derinflation, or excessive loading, either

separately or in combination, can cause

heat buildup and possible tire failure.

The positions of the wear indicators are

marked on the tire sidewall with TWI, Tread

Wear Indicator.

RSC – Run-flat tires

Run-flat tires, refer to page 233, are labeled

with a circular symbol containing the let-

ters RSC marked on the sidewall.

230

Online Edition for Part no. 01405A02680 - II/20

Wheels and tires

MOBILITY

center or repair shop. Have vehicle towed

or transported as needed. Do not repair

damaged tires, but have them replaced.

Tire damage

General information

Inspect your tires regularly for damage, for-

eign objects lodged in the tread, and tread

wear.

Warning

Tires can become damaged by driving over

obstacles, e.g., curbs or road damage, at

high speed. Larger wheels have a smaller

tire cross-section. The smaller the tire

cross-section, the higher the risk of tire

damage. There is a danger of accidents and

property damage. If possible, avoid driving

over objects or road conditions that may

damage tires, or drive over them slowly

and carefully.

Driving over rough or damaged road surfa-

ces, as well as debris, curbs and other obsta-

cles can cause serious damage to wheels,

tires and suspension parts. This is more

likely to occur with low-profile tires, which

provide less cushioning between the wheel

and the road. Be careful to avoid road haz-

ards and reduce your speed, especially if

your vehicle is equipped with low-profile

tires.

Indications of tire damage or other vehicle

malfunctions:

Changing wheels and tires

–

Unusual vibrations.

Unusual tire or running noises.

Mounting and wheel balancing

Unusual handling such as a strong ten-

dency to pull to the left or right.

Have mounting and tire and wheel balanc-

ing carried out by a dealer’s service center

or another qualified service center or repair

shop.

Damage can be caused by the following sit-

uations, for instance:

–

Driving over curbs.

Road damage.

Light-alloy rim MINI Electric Corona

Spoke 2 Tone

Tire inflation pressure too low.

Vehicle overloading.

Incorrect tire storage.

Safety information

Warning

Damaged tires can lose tire inflation pres-

sure, which can lead to loss of vehicle con-

trol. There is a risk of accident. If tire dam-

age is suspected while driving,

immediately reduce speed and stop. Have

wheels and tires checked. For this pur-

pose, drive carefully to the nearest dealer’s

service center or another qualified service

A balancing weight is required for wheel

balancing.

The balancing weight is available as a spe-

cial tool from a dealer’s service center, an-

231

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Wheels and tires

other qualified service center or repair

shop.

combination remounted on the vehicle as

soon as possible.

Have wheel balancing executed exclusively

by a dealer’s service center or another

qualified service center or repair shop.

Recommended tire brands

Wheel and tire combination

General information

You can ask the dealer's service center or

another qualified service center or repair

shop about the correct wheel/tire combina-

tion and wheel rim versions for the vehicle.

Safety information

For each tire size, the manufacturer of the

vehicle recommends certain tire brands.

The tire brands can be identified by a star

on the tire sidewall.

Warning

Wheels and tires which are not suitable

for your vehicle can damage parts of the

vehicle, for instance due to contact with

the body due to tolerances despite the

same official size rating. There is a risk of

an accident. The manufacturer of your ve-

hicle strongly suggests that you use

wheels and tires that have been recom-

mended by the vehicle manufacturer for

your vehicle type.

New tires

Tire traction is not optimal due to manufac-

turing circumstances when tires are brand-

new; they achieve their full traction poten-

tial after a break-in time.

Drive conservatively for the first

200 miles/300 km.

Retreaded tires

Warning

Incorrect wheel/tire combinations will

have a negative impact on the vehicle's

handling and on the function of a variety

of systems, such as the ABS Antilock Brak-

ing System or DSC Dynamic Stability Con-

trol. There is a risk of accident. To main-

tain good handling and vehicle response,

use only tires with a single tread configu-

ration from a single manufacturer. The

manufacturer of the vehicle recommends

that you use wheels and tires that have

been recommended by the vehicle manu-

facturer for your vehicle type. Following

tire damage, have the original wheel/tire

Retreaded tires can have different tire cas-

ing structures. With advanced age the

service life can be limited. There is a risk

of an accident. The manufacturer of your

vehicle does not recommend the use of re-

treaded tires.

The manufacturer of the vehicle does not

recommend the use of retreaded tires.

232

Online Edition for Part no. 01405A02680 - II/20

Wheels and tires

Storage

MOBILITY

Winter tires

Store wheels and tires in a cool, dry and

dark place.

Winter tires are recommended for operat-

ing on winter roads.

Always protect tires against all contact with

oil, grease, and solvents.

Although so-called all-season M+S tires pro-

vide better winter traction than summer

tires, they usually do not provide the same

level of performance as winter tires.

Do not leave tires in plastic bags.

Remove dirt from wheels or tires.

Maximum speed of winter tires

If the maximum speed of the vehicle is

higher than the permissible speed for the

winter tires, then attach a label showing the

permissible maximum speed in the field of

view. The label is available from a dealer's

service center or another qualified service

center or repair shop.

Run-flat tires

Concept

Run-flat tires permit continued driving un-

der restricted conditions even in the event

of a complete loss of tire inflation pressure.

With winter tires mounted, observe and do

not exceed the permissible maximum speed.

General information

The wheels are composed of tires that are

self-supporting to a limited degree.

Changing runflat tires

For your own safety, use only runflat tires.

Further information is available from a deal-

er's service center or another qualified serv-

ice center or repair shop.

The support of the sidewall allows the tire

to remain drivable to a restricted degree in

the event of a tire inflation pressure loss.

Follow the instructions for continued driv-

ing with a flat tire.

Rotating wheels between axles

Different wear patterns can occur on the

front and rear axles depending on individual

driving conditions. The tires can be rotated

in pairs between the axles to achieve even

wear. Further information is available from

a dealer's service center or another qualified

service center or repair shop. After rotating,

check the tire pressure and correct, if

needed.

Safety information

Warning

The vehicle handles differently when a

run-flat tire has insufficient or no tire

pressure; for instance, reduced lane stabil-

ity when braking, braking distances are

longer and the self-steering properties will

change. There is a risk of accident. Drive

moderately and do not exceed a speed of

50 mph/80 km/h.

Storing tires

Tire inflation pressure

Do not exceed the maximum tire inflation

pressure indicated on the side wall of the

tire.

233

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Wheels and tires

Label

General information

–

Follow the instructions on using the

Mobility System found on the compres-

sor and sealant container.

Use of the Mobility System may be inef-

fective if the tire puncture measures ap-

prox. 1/8 inches/4 mm or more.

Contact a dealer's service center or an-

other qualified service center or repair

shop if the tire cannot be made drivable.

The tires are marked on the tire sidewall

with RSC Run-flat System Component.

Do not remove foreign bodies that have

penetrated the tire. Only remove foreign

objects if they are visibly protruding

from the tire.

–

Pull the speed limit sticker off the seal-

ant container and apply it to the steer-

ing wheel.

Repairing a flat tire

Safety measures

The use of a sealant can damage the

TPM wheel electronics. In this case,

have the TPM wheel electronics re-

placed at the next opportunity.

–

Park the vehicle as far away as possible

from passing traffic and on solid ground.

–

Switch on the hazard warning system.

–

The compressor can be used to check

the tire inflation pressure.

Secure the vehicle against rolling away

by setting the parking brake.

–

Turn the steering wheel until the front

wheels are in the straight-ahead posi-

tion and engage the steering wheel lock.

Overview

Storage

The Mobility System is in a bag on the right

side of the cargo area.

Have all vehicle occupants get out of the

vehicle and ensure that they remain out-

side the immediate area in a safe place,

such as behind a guardrail.

Sealant container

–

If necessary, set up a warning triangle

at an appropriate distance.

Mobility System

Concept

With the Mobility System, minor tire dam-

age can be sealed temporarily to enable con-

tinued travel. To accomplish this, sealant is

pumped into the tires, which seals the dam-

age from the inside.

–

Sealant container, arrow 1.

Filling hose, arrow 2.

234

Online Edition for Part no. 01405A02680 - II/20

Wheels and tires

MOBILITY

Observe use-by date on the sealant con-

tainer.

Filling the tire with sealant

Safety information

Compressor

NOTICE

The compressor can overheat during ex-

tended operation. There is a risk of dam-

age to property. Do not run the compres-

sor for more than 10 minutes.

Filling

1. Shake the sealant container.

1

2

3

4

5

6

7

8

Sealant container unlocking

Sealant container holder

Tire pressure gage

Reduce tire inflation pressure button

On/off switch

Compressor

Connector/cable for socket

Connection hose

2. Pull filling hose completely out of the

cover of the sealant container. Do not

kink the hose.

Safety measures

–

Park the vehicle as far away as possible

from passing traffic and on solid ground.

–

Switch on the hazard warning system.

Secure the vehicle against rolling away

by setting the parking brake.

–

Turn the steering wheel until the front

wheels are in the straight-ahead posi-

tion and engage the steering wheel lock.

Have all vehicle occupants get out of the

vehicle and ensure that they remain out-

side the immediate area in a safe place,

such as behind a guardrail.

–

If necessary, set up a warning triangle

at an appropriate distance.

235

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Wheels and tires

3. Slide the sealant container into the

holder on the compressor housing, en-

suring that it engages audibly.

6. With standby state or drive-ready state

switched on, switch on the compressor.

Let the compressor run for max. 10 minutes

to fill the tire with sealant and achieve a

tire inflation pressure of approx. 2.5 bar.

4. Screw the filling hose of the sealant con-

tainer onto the tire valve of the non-

working wheel.

While the tire is being filled with sealant,

the tire inflation pressure may sporadically

reach approx. 5 bar. Do not switch off the

compressor at this point.

Checking and adjusting the tire

inflation pressure

Checking

1. Switch off the compressor.

2. Read the tire inflation pressure on the

tire pressure gage.

5. With the compressor switched off, in-

sert the plug into the power socket in-

side the vehicle.

To continue the trip, a tire inflation pres-

sure of at least 2 bar must be reached.

Removing and stowing the sealant

container

1. Unscrew the filling hose of the sealant

container from the tire valve.

2. Press the red unlocking device.

3. Remove the sealant container from the

compressor.

4. Wrap and store the sealant container in

suitable material to avoid dirtying the

cargo area.

236

Online Edition for Part no. 01405A02680 - II/20

Wheels and tires

MOBILITY

7. Pull the connector out of the power

Minimum tire inflation pressure is not

reached

socket inside the vehicle.

8. Stow the Mobility System in the vehicle.

1. Pull the connector out of the power

socket inside the vehicle.

Minimum tire inflation pressure is

reached

2. Drive 33 ft/10 m forward and back to

distribute the sealant in the tire.

1. Unscrew the connection hose of the

compressor from the tire valve.

3. Screw the connection hose of the com-

pressor directly onto the tire valve stem.

2. Pull the connector out of the power

socket inside the vehicle.

3. Stow the Mobility System in the vehicle.

4. Immediately drive approx.

5 miles/10 km to ensure that the sealant

is evenly distributed in the tire.

Do not exceed a speed of

50 mph/80 km/h.

If possible, do not drive at speeds less

than 12 mph/20 km/h.

4. Insert the connector into the power

socket inside the vehicle.

Adjustment

1. Stop at a suitable location.

2. Screw the connection hose of the com-

pressor directly onto the tire valve stem.

5. With standby state or drive-ready state

switched on, switch on the compressor.

If a tire inflation pressure of at least

2 bar cannot be reached, contact your

dealer's service center or another quali-

fied service center or repair shop.

If a tire inflation pressure of at least

2 bar is reached, see Minimum tire infla-

tion pressure is reached.

6. Unscrew the connection hose of the

compressor from the tire valve.

237

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Wheels and tires

of snow chains on these wheels and tires is

not permitted.

3. Insert the connector into the power

socket inside the vehicle.

Safety information

Warning

With the mounting of snow chains on un-

suitable tires, the snow chains can come

into contact with vehicle parts. There may

be a risk of accident or risk of damage to

property. Do not mount snow chains.

4. Correct the tire inflation pressure to at

least 2.0 bar.

–

Increase tire inflation pressure: with

standby state or drive-ready state,

switch on the compressor.

Changing wheels/tires

General information

–

Reduce tire inflation pressure: press

the button on the compressor.

When using run-flat tires or a flat tire kit, a

wheel does not always need to be changed

immediately when there is a loss of tire in-

flation pressure due to a flat tire.

5. Unscrew the connection hose of the

compressor from the tire valve.

6. Pull the connector out of the power

socket inside the vehicle.

If needed, the tools for changing wheels are

available as accessories from a dealer’s

service center or another qualified service

center or repair shop.

7. Stow the Mobility System in the vehicle.

Continuing the trip

Do not exceed the maximum permissible

speed of 50 mph/80 km/h.

Safety information

Reinitialize the Flat Tire Monitor, refer to

page 150.

DANGER

The vehicle jack is only provided for short-

term lifting of the vehicle for wheel

Reset the Tire Pressure Monitor, refer to

page 145.

changes. Even if all safety measures are

observed, there is a risk of the raised vehi-

cle falling, if the vehicle jack tips over.

There is a risk of injuries or danger to life.

When the vehicle is raised with the vehi-

cle jack, do not lie under the vehicle and

do not switch on the drive-ready state.

Replace the nonworking tire and the sealant

container of the Mobility System promptly.

Snow chains

General information

The manufacturer of the vehicle has deter-

mined certain wheels and tires to be suita-

ble for operation on the vehicle. Mounting

238

Online Edition for Part no. 01405A02680 - II/20

Wheels and tires

MOBILITY

DANGER

Warning

Supports such as wooden blocks under the

vehicle jack reduce the capacity of the ve-

hicle jack to bear weight. They have the

potential to exert too much strain on the

vehicle jack, causing it to tip over and the

vehicle to fall. There is a risk of injuries or

danger to life. Do not place supports under

the vehicle jack.

When the vehicle jack is not inserted into

the jacking point provided for this pur-

pose, the vehicle may be damaged or the

vehicle jack may slip when it is being

cranked up. There is a risk of injury or risk

of damage to property. When cranking up

the vehicle jack, ensure that it is inserted

in the jacking point next to the wheel

housing.

Warning

The jack, issued by the vehicle manufac-

turer, is provided in order to perform a

wheel change in the event of a breakdown.

The jack is not designed for frequent use;

for example, changing from summer to

winter tires. Using the jack frequently may

cause it to become jammed or damaged.

There is a risk of injury and risk of damage

to property. Only use the jack to attach an

emergency or spare wheel in the event of

a breakdown.

A vehicle that is raised on a vehicle jack

may fall off of the jack if lateral forces are

exerted on it. There is a risk of injury and

risk of damage to property. While the ve-

hicle is raised, do not exert lateral forces

on the vehicle or pull abruptly on the vehi-

cle. Have a stuck wheel removed by a deal-

er’s service center or another qualified

service center or repair shop.

Securing the vehicle against rolling

General information

The vehicle manufacturer recommends to

additionally secure the vehicle against roll-

ing away when changing a wheel.

Warning

On soft, uneven or slippery ground, for ex-

ample snow, ice, tiles, etc., the vehicle jack

can slip away. There is a risk of injury. If

possible, change the wheel on a flat, solid,

and slip-resistant surface.

Warning

The vehicle jack is optimized for lifting

the vehicle and for the jacking points on

the vehicle only. There is a risk of injury.

Do not lift any other vehicle or cargo using

the vehicle jack.

239

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Wheels and tires

side the immediate area in a safe place,

such as behind a guardrail.

On a level surface

–

Depending on the vehicle equipment,

get wheel change tools and, if necessary,

the emergency wheel from the vehicle.

If necessary, set up a warning triangle

or portable hazard warning light at an

appropriate distance.

Secure the vehicle additionally against

rolling.

Place wheel chocks or other suitable objects

in front and behind the wheel that is diago-

nal to the wheel to be changed.

–

Loosen the lug bolts a half turn.

Jacking points for the vehicle jack

On a slight downhill gradient

The jacking points for the vehicle jack are

located at the marked positions.

If you need to change a wheel on a slight

downhill grade, place chocks and other suit-

able objects, for instance a rock, under the

wheels of both the front and rear axles

against the rolling direction.

Preparing the vehicle

–

Park the vehicle on solid and non-slip

ground at a safe distance from traffic.

–

Switch on the hazard warning system.

Set the parking brake.

Engage a gear or move the selector lever

to position P.

–

As soon as permitted by the traffic flow,

have all vehicle occupants get out of the

vehicle and ensure that they remain out-

240

Online Edition for Part no. 01405A02680 - II/20

Wheels and tires

MOBILITY

3. Extend the vehicle jack by turning the

vehicle jack crank or lever clockwise.

Jacking up the vehicle

Warning

Hands and fingers can be jammed when

using the vehicle jack. There is a risk of

injury. Comply with the described hand

position and do not change this position

while using the vehicle jack.

1. Hold the vehicle jack with one hand, ar-

row 1, and grasp the vehicle jack crank

or lever with your other hand, arrow 2.

4. Take your hand away from the vehicle

jack as soon as the vehicle jack is under

load and continue turning the vehicle

jack crank or lever with one hand.

5. Make sure that the vehicle jack foot

stands vertically and at a right angle be-

neath the jacking point.

2. Insert the vehicle jack into the rectan-

gular recess of the jacking point closest

to the wheel to be changed.

6. Make sure that the vehicle jack foot

stands vertically and perpendicularly be-

neath the jacking point after extending

the vehicle jack.

7. Crank the vehicle up, until the vehicle

jack is with the entire surface on the

241

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Wheels and tires

ground and the relevant wheel is maxi-

mum 1.2 inches/3 cm above ground.

other qualified service center or repair

shop.

Mounting a wheel

Mount one emergency wheel only, as re-

quired.

1. Unscrew the lug bolts.

2. Remove the wheel.

3. Put the new wheel or emergency wheel

on and screw in at least two lug bolts in

a crosswise pattern until hand-tight.

If non-original light-alloy wheels of the

vehicle manufacturer are mounted, the

accompanying lug bolts may have to be

used as well.

4. Hand-tighten the remaining lug bolts

and tighten all lug bolts well in a cross-

wise pattern.

5. Turn the vehicle jack crank counter-

clockwise to retract the vehicle jack and

lower the vehicle.

6. Remove the vehicle jack and stow it se-

curely.

After the wheel change

1. Tighten the lug bolts crosswise. The

tightening torque is 101 lbs ft/140 Nm.

2. Stow the nonworking wheel in the cargo

area, if necessary.

The nonworking wheel cannot be stored

under the cargo floor panel because of

its size.

3. Check tire inflation pressure at the next

opportunity and correct as needed.

4. Reinitialize the Flat Tire Monitor.

Reset the Tire Pressure Monitor TPM.

5. Check to make sure the lug bolts are

tight with a calibrated torque wrench.

6. Have the damaged tire replaced at the

nearest dealer's service center or an-

242

Online Edition for Part no. 01405A02680 - II/20

Engine compartment

MOBILITY

Engine compartment

in your vehicle, e.g., due to the selected op-

tions or country versions. This also applies

to safety-related functions and systems.

When using these functions and systems,

the applicable laws and regulations must be

observed.

Vehicle features and options

This chapter describes all standard, country-

specific and optional features offered with

the series. It also describes features and

functions that are not necessarily available

Overview

1

2

3

Filler neck for washer fluid

Vehicle identification number

Jump-starting, positive terminal

4

5

Jump-starting, negative terminal

Coolant reservoir

243

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Engine compartment

Hood

Warning

Body parts can be jammed when opening

and closing the hood. There is a risk of in-

jury. Make sure that the area of movement

of the hood is clear during opening and

closing.

Safety information

Warning

Improperly executed work in the engine

compartment can damage vehicle compo-

nents and impair vehicle functions. There

is a risk of an accident and damage to

property. Have work in the engine com-

partment performed by a dealer’s service

center or another qualified service center

or repair shop.

NOTICE

Folded-away wipers can be jammed when

the hood is opened. There is a risk of dam-

age to property. Make sure that the wipers

with the wiper blades mounted are folded

down onto the windshield before opening

the hood.

Warning

The engine compartment accommodates

moving components. Certain components

in the engine compartment can also move

with the vehicle switched off, for instance

the radiator fan. There is a risk of injury.

Do not reach into the area of moving parts.

Keep articles of clothing and hair away

from moving parts.

NOTICE

When the hood is closed, it must engage

on both sides. Pressing again can damage

the hood. There is a risk of damage to

property. Open the hood again and then

close it energetically. Avoid pressing

again.

Opening the hood

1. Pull lever, arrow 1.

Hood is unlocked.

Warning

There are protruding parts, for instance

locking hook, on the inside of the hood.

There is a risk of injury. If the hood is

open, pay attention to protruding parts

and keep clear of these areas.

Warning

An incorrectly locked hood can open while

driving and restrict visibility. There is a

risk of accident. Stop immediately and cor-

rectly close the hood.

2. After the lever is released, pull the lever

again, arrow 2.

Hood can be opened.

244

Online Edition for Part no. 01405A02680 - II/20

Engine compartment

MOBILITY

Indicator/warning lights

When the hood is opened, a Check Control

message is displayed.

Closing the hood

Energetically close the hood from approx.

20 in/50 cm.

The hood must engage on both sides.

245

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Coolant

Vehicle features and options

Warning

Additives are harmful and incorrect addi-

tives can damage the drive system. There

is a risk of injury and risk of damage to

property. Do not allow additives to come

into contact with skin, eyes or articles of

clothing. Use suitable additives only.

This chapter describes all standard, country-

specific and optional features offered with

the series. It also describes features and

functions that are not necessarily available

in your vehicle, e.g., due to the selected op-

tions or country versions. This also applies

to safety-related functions and systems.

When using these functions and systems,

the applicable laws and regulations must be

observed.

NOTICE

Loss of coolant may damage the drive sys-

tem. There is a risk of damage to property.

Make sure that there is sufficient coolant

in the reservoir at all times. Always have

coolant added by a dealer's service center

or another qualified service center or re-

pair shop.

General information

Coolant consists of water and additives.

Not all commercially available additives are

suitable for the vehicle. Do not mix addi-

tives of different colors. Observe the water -

additive mixing ratio of 50:50. Information

about suitable additives is available from a

dealer’s service center or another qualified

service center or repair shop.

Coolant level

Checking

There are yellow Min and Max marks in the

coolant reservoir.

Safety information

1. Allow the drive system to cool down.

2. Open the hood, refer to page 244.

Warning

3. Turn the lid of the coolant reservoir

slightly counterclockwise to allow any

With the drive system hot and the cooling

system open, coolant can escape and lead

to scalding. There is a risk of injury. Only

open the cooling system with the drive

system cooled down.

246

Online Edition for Part no. 01405A02680 - II/20

Coolant

MOBILITY

excess pressure to dissipate, then open

it.

4. Open the coolant reservoir lid.

5. The coolant level is correct if it lies be-

tween the minimum and maximum

marks in the filler neck.

6. Close the lid.

When the coolant level is low, check the

cooling system and add coolant. Have the

cooling system checked and coolant added

by a dealer’s service center or another

qualified service center or repair shop.

Disposal

Comply with the relevant environ-

mental protection regulations when

disposing of coolant and coolant ad-

ditives.

247

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Maintenance

The manufacturer of your vehicle recom-

mends that the work on the vehicle, in par-

ticular maintenance and repair, be per-

formed by a dealer’s service center or

another qualified service center or repair

shop.

Vehicle features and options

This chapter describes all standard, country-

specific and optional features offered with

the series. It also describes features and

functions that are not necessarily available

in your vehicle, e.g., due to the selected op-

tions or country versions. This also applies

to safety-related functions and systems.

When using these functions and systems,

the applicable laws and regulations must be

observed.

Condition Based Service CBS

Concept

Sensors and special algorithms take into ac-

count the driving conditions of the vehicle.

CBS uses these to calculate the need for

maintenance.

MINI maintenance system

The system makes it possible to adapt the

amount of maintenance corresponding to

your user profile.

The maintenance system provides service

notifications and thereby provides support

in maintaining road safety and the opera-

tional reliability of the vehicle.

General information

Information on service notifications, refer

to page 126, can be displayed on the Control

Display.

In some cases, scopes and intervals of the

maintenance system may vary according to

the country version. Replacement work,

spare parts, fuels and lubricants, and wear

materials are calculated separately. Further

information is available from a dealer's serv-

ice center or another qualified service cen-

ter or repair shop.

Service data in the vehicle key

Information on the service notifications is

continuously stored in the vehicle key. The

service center can read this data out and

suggest a maintenance scope for the vehi-

cle.

Safety information

Therefore, hand the service advisor the ve-

hicle key with which the vehicle was driven

most recently.

DANGER

Improperly performed work, in particular

maintenance and repair on the high-volt-

age system, can lead to electric shock.

There is a risk of injury, fire and danger to

life.

Storage periods

Storage periods during which the vehicle

battery was disconnected are not taken into

account.

248

Online Edition for Part no. 01405A02680 - II/20

Maintenance

MOBILITY

Have a dealer's service center or another

qualified service center or repair shop up-

date the time-dependent maintenance pro-

cedures, such as checking brake fluid and

changing the microfilter/activated-charcoal

filter.

Safety information

NOTICE

The socket for Onboard Diagnosis is an in-

tricate component intended to be used in

conjunction with specialized equipment to

check the vehicle’s primary emissions sys-

tem. Improper use of the socket for On-

board Diagnosis, or contact with the

socket for Onboard Diagnosis for other

than its intended purpose, can cause vehi-

cle malfunctions and creates risks of per-

sonal and property damage. Given the fore-

going, the manufacture of your vehicle

strongly recommends that access to the

socket for Onboard Diagnosis be limited to

a dealer's service center or another quali-

fied service center or repair shop or other

persons that have the specialized training

and equipment for purposes of properly

utilizing the socket for Onboard Diagnosis.

Maintenance Manual and

Service and Warranty Infor-

mation Booklet for US models

and Warranty and Service

Guide Booklet for Canadian

models

Please consult your Maintenance Manual

and Service and Warranty Information

Booklet for US models and Warranty and

Service Guide Booklet for Canadian models

for additional information on the perform-

ance of service and maintenance work.

The manufacturer of your vehicle recom-

mends that maintenance and repair be per-

formed by a service center or another quali-

fied service center or repair shop. Records

of regular maintenance and repair work

should be retained.

Position

Socket for OBD Onboard Diag-

nosis

There is an OBD socket on the driver's side

for checking the primary components in the

vehicle's emissions.

General information

Devices connected to the OBD socket trig-

ger the alarm system when the vehicle is

locked. Remove any devices connected at

the OBD socket before locking the vehicle.

249

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Replacing components

Vehicle features and options

Wiper blades

Safety information

NOTICE

This chapter describes all standard, country-

specific and optional features offered with

the series. It also describes features and

functions that are not necessarily available

in your vehicle, e.g., due to the selected op-

tions or country versions. This also applies

to safety-related functions and systems.

When using these functions and systems,

the applicable laws and regulations must be

observed.

The window may sustain damage if the

wiper falls onto it without the wiper blade

installed. There is a risk of damage to

property. Hold the wiper firmly when

changing the wiper blade. Do not fold or

switch on the wiper without a wiper blade

installed.

Vehicle tool kit

NOTICE

Folded-away wipers can be jammed when

the hood is opened. There is a risk of dam-

age to property. Make sure that the wipers

with the wiper blades mounted are folded

down onto the windshield before opening

the hood.

Replacing the front wiper blades

1. To change the wiper blades, fold up the

wiper arms.

Depending on the vehicle equipment, the

onboard vehicle tool kit is located on the

right side under the cargo floor panel or in a

bag on the right side of the cargo area.

2. Fold up and hold the wiper arm firmly.

3. Open the wiper blade lock, arrow.

After use, secure the bag with the onboard

vehicle tool kit on a lashing eye again.

250

Online Edition for Part no. 01405A02680 - II/20

Replacing components

4. Pull the wiper blade down out of the

MOBILITY

Light and bulb replacement

holder on the wiper arm, arrow 1.

General information

Lights and bulbs

Lights and bulbs make an essential contri-

bution to vehicle safety.

The manufacturer of the vehicle recom-

mends that you have appropriate work per-

formed by a dealer’s service center or an-

other qualified service center or repair shop

if you are unfamiliar with it or if it has not

been described here.

5. Pull the wiper blade free from the holder

of the wiper arm, arrow 2.

6. Insert and latch a new wiper blade in re-

verse order.

A spare light box is available from a dealer's

service center or another qualified service

center or repair shop.

7. Fold down the wiper arm.

Follow the safety information, refer to

page 251.

Replacing the rear wiper blade

1. Fold up and hold the wiper arm firmly.

2. Turn the wiper blade all the way back.

Light-emitting diodes (LEDs)

Some items of equipment use light-emitting

diodes installed behind a cover as a light

source. These light-emitting diodes are re-

lated to conventional lasers and are offi-

cially designated as Class 1 light-emitting

diodes.

Follow the safety information, refer to

page 251.

Safety information

Lights and bulbs

3. Push the wiper blade out of the fasten-

ing by continuing to turn it all the way.

4. Insert the new wiper blade by following

the steps in reverse order. The wiper

blade must engage audibly.

Warning

Bulbs can get hot during operation. Con-

tact with the bulbs can cause burns. There

is a risk of injury. Only change bulbs after

they have cooled off.

5. Fold down the wiper arm.

251

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Replacing components

checked and, if necessary, corrected by a

dealer’s service center or another qualified

service center or repair shop.

Warning

Work on switched-on lighting systems can

cause short circuits. There is a risk of in-

jury or risk of damage to property. When

working on the lighting system, switch off

the lights in question. If necessary, heed

the bulb manufacturer's instructions.

LED front lights, bulb replacement

All lights feature LED technology.

In the case of a malfunction, contact a deal-

er's service center or another qualified serv-

ice center or repair shop.

NOTICE

LED front fog lights

Dirty bulbs have a reduced service life.

There is a risk of damage to property. Do

not hold new bulbs with your bare hands.

Use a clean cloth or something similar, or

hold the bulb by its base.

These front fog lights are made using LED

technology. In the case of a malfunction,

contact a dealer's service center or another

qualified service center or repair shop.

Tail lights, bulb replacement

Overview

Light-emitting diodes (LEDs)

Warning

Intensive brightness can irritate or dam-

age the retina of the eye. There is a risk of

injury. Do not look directly into the head-

lights or other light sources. Do not re-

move the LED covers.

Headlight glass

1

2

3

4

Side tail lights

Condensation can form on the inside of the

headlight glass in cool or humid weather.

When driving with the lights switched on,

the condensation evaporates after a short

time. The headlight glass does not need to

be changed.

Rear fog lights

License plate light

Center brake light

If despite driving with the headlights

switched on, increasing humidity forms, for

instance water droplets in the light, have

the headlights checked.

Headlight setting

The headlight adjustments can be affected

by changing lights and bulbs. After the

headlight adjustment was changed, have it

252

Online Edition for Part no. 01405A02680 - II/20

Replacing components

MOBILITY

Side tail lights

3. Turn the bulb holder for the reversing

light, arrow, counterclockwise and re-

move it.

1

2

3

4

Tail lights

Turn signals/brake lights

Reversing lights

4. Remove the bulb holder from the open-

ing.

5. Press the nonworking bulb gently into

the socket, turn counterclockwise and

remove.

Side tail lights

Follow the general instructions on lights

and bulbs, refer to page 251.

Bulb, reversing lights: P21W.

1. Open the tailgate.

2. Remove left or right cover.

6. Proceed in the reverse order to insert

the new bulb and attach the bulb holder.

Make sure that the bulb holder engages

in all fasteners.

Central brake light and license plate

lights

Follow the general instructions on lights

and bulbs, refer to page 251.

The lights feature LED technology. In the

case of a malfunction, contact a dealer's

service center or another qualified service

center or repair shop.

Side turn signal, bulb replacement

Follow the general instructions on lights

and bulbs, refer to page 251.

253

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Replacing components

5-watt bulb, WY5W.

Vehicle battery

1. Open the hood. The covers of the side

turn signal lights are on the left and

right next to the hinges of the hood.

The vehicle battery has 12 volts. The bat-

tery supplies the onboard electronics with

energy.

For information about the high-voltage sys-

tem, refer to page 218.

General information

The battery is maintenance-free.

More information about the battery can be

requested from a dealer's service center or

another qualified service center or repair

shop.

2. Loosen the nuts of the cover by hand or

with the onboard vehicle tool kit, refer

to page 250, and remove the cover.

Safety information

Warning

Vehicle batteries that are not compatible

can damage vehicle systems and impair

vehicle functions. There is a risk of an ac-

cident and damage to property. Only vehi-

cle batteries that are compatible with your

vehicle type should be installed in your ve-

hicle. Information on compatible vehicle

batteries is available at your dealer’s serv-

ice center.

3. Turn the bulb socket counterclockwise

and remove.

Register the battery to the vehicle

The manufacturer of the vehicle recom-

mends that you have a service center or an-

other qualified service center or repair shop

register the vehicle battery to the vehicle

after the battery has been replaced. Once

the battery has been registered again, all

comfort features will be available without

restriction and any Check Control messages

displayed which relate to comfort features

will disappear.

4. Replace the bulb.

5. To insert the new bulb, proceed in re-

verse order of removal.

254

Online Edition for Part no. 01405A02680 - II/20

Replacing components

MOBILITY

Charging the battery

General information

For charging a discharged battery, refer to

page 226.

Fuses

Safety information

Warning

Safety information

Incorrect and repaired fuses can overload

electrical lines and components. There is a

risk of fire. Never attempt to repair a

blown fuse. Do not replace a nonworking

fuse with a substitute of another color or

amperage rating.

NOTICE

Battery chargers for the vehicle battery

can work with high voltages and currents,

which means that the 12 volt on-board

network can be overloaded or damaged.

There is a risk of damage to property. Only

connect battery chargers for the vehicle

battery to the starting aid terminals in the

engine compartment.

Accessing the fuses

The fuses are located in the glove compart-

ment.

1. Open the glove compartment.

2. Swing the cover down, arrow.

Power failure

After a power loss, some equipment needs

to be newly initialized or individual settings

updated, for example:

–

Memory function: store the positions

again.

–

Time: update.

Date: update.

Glass sunroof: initialize the system.

Information on the fuse types and locations,

as well as the positions of any other fuse

boxes, is available on the Internet:

Disposing of old batteries

Have old batteries disposed of by a

dealer’s service center or another

qualified service center or repair

Where applicable, information on the fuse

types and locations is also found on a sepa-

rate sheet in the fuse box.

shop or take them to a collection point.

Maintain the filled battery in an upright po-

sition for transport and storage. Secure the

battery so that it does not tip over during

transport.

Replacing fuses

The vehicle manufacturer recommends that

you have a dealer's service center or an-

other qualified service center or repair shop

replace the fuses.

255

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Breakdown assistance

Vehicle features and options

Warning triangle

This chapter describes all standard, country-

specific and optional features offered with

the series. It also describes features and

functions that are not necessarily available

in your vehicle, e.g., due to the selected op-

tions or country versions. This also applies

to safety-related functions and systems.

When using these functions and systems,

the applicable laws and regulations must be

observed.

The warning triangle is located in the tail-

gate. To remove, loosen the brackets.

Hazard warning flashers

First-aid kit

General information

Some of the articles have a limited service

life.

Check the expiration dates of the contents

regularly and replace any expired items

promptly.

The button is located above the Control Dis-

play.

Storage

The first-aid kit is located in the cargo area.

The red light in the button flashes when the

hazard warning flashers are activated.

MINI Roadside Assistance

Concept

MINI Roadside Assistance can be contacted

if assistance is needed in the event of a

breakdown.

256

Online Edition for Part no. 01405A02680 - II/20

Breakdown assistance

MOBILITY

You can launch Teleservice Help by re-

questing it through the Service Specialist.

General information

In the event of a breakdown, data on the ve-

hicle's condition is sent to the vehicle man-

ufacturer.

1. Park the vehicle in a safe place.

2. Set the parking brake.

There are various ways of making contact.

3. Control Display is switched on.

4. Confirm Teleservice Help.

–

Via a Check Control message, refer to

page 121.

The driving ability of the vehicle can be re-

stored for specific functions.

–

Calling with a mobile phone.

If this is not possible, further measures will

be initiated, for instance Roadside Assis-

tance will be informed.

Requirements

–

Active MINI Connected contract or

equipment version with intelligent

emergency call.

–

Cellular network reception.

Standby state is switched on.

Emergency Request

Intelligent emergency call

Concept

In case of an emergency, an Emergency Re-

quest can be triggered automatically by the

system or manually.

Starting

If the vehicle is equipped with Teleservices,

support is offered through Teleservice Diag-

nosis.

Via the Central Information Display (CID):

1.

"MINI Connected"

General information

Only press the SOS button in an emergency.

2. "MINI Assist"

3. "MINI Roadside Assistance"

The Intelligent Assist system establishes a

connection with the MINI Response Center.

The contact to the Roadside Assistance

of the manufacture is established.

For technical reasons, the Emergency Re-

quest cannot be guaranteed under unfavora-

ble conditions.

A telephone number is displayed, if

needed. Select to dial the telephone

number on a connected mobile phone.

Teleservice Diagnosis

Teleservice Diagnosis enables the wireless

transmission of detailed vehicle data that is

important for vehicle diagnosis. This data is

transmitted automatically.

Teleservice Help

Depending on the country, the Teleservice

Help enables a more in-depth diagnosis of

the vehicle via wireless transmission.

257

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Overview

Breakdown assistance

The MINI Response Center then makes

contact with you and takes further steps

to help you.

Even if you are unable to respond, the

MINI Response Center can take further

steps to help you under certain circum-

stances.

For this purpose, data that serves to de-

termine the necessary rescue measures,

for instance the current position of the

vehicle when it can be determined, is

transmitted to the MINI Response Cen-

ter.

SOS button in the roofliner

Functional requirements

If you can no longer hear the MINI Re-

sponse Center through the loudspeakers,

the hands-free system, for instance, may

be broken. However, the MINI Response

Center may still be able to hear you.

–

Standby state is switched on.

The Assist system is functional.

If the vehicle is equipped with intelli-

gent emergency call: the SIM card

integrated in the vehicle has been acti-

vated.

The MINI Response Center ends the Emer-

gency Request.

Automatic triggering

Jump-starting

Under certain conditions, for instance if the

airbags trigger, an Emergency Request is

automatically initiated immediately after an

accident of corresponding severity. Auto-

matic Collision Notification is not affected

by pressing the SOS button.

General information

Have only a dealer’s service center or an-

other qualified service center or repair shop

perform the jump start.

Manual triggering

1. Press the cover briefly to open it.

Safety information

2. Press the SOS button until the LED at

the button lights up green.

DANGER

Contact with live components can lead to

an electric shock. There is a risk of inju-

ries or danger to life. Do not touch any

components that are under voltage.

–

The LED is illuminated green when an

Emergency Request has been initiated.

If the situation allows, wait in your vehi-

cle until the voice connection has been

established.

–

The LED flashes green when a connec-

tion to the MINI Response Center has

been established.

258

Online Edition for Part no. 01405A02680 - II/20

Breakdown assistance

MOBILITY

–

Lift the vehicle using suitable means.

Towing

Do not lift or secure the vehicle by its

tow fitting, body parts, or suspension

parts.

Transporting the vehicle

General information

The vehicle is not permitted to be towed.

Towing other vehicles

General information

Safety information

Switch on the hazard warning system, de-

pending on local regulations.

NOTICE

The vehicle can be damaged when towing

the vehicle with a single lifted axle. There

is a risk of damage to property. The vehi-

cle should only be transported on a loading

platform.

If the electrical system has failed, clearly

identify the vehicle being towed by placing

a sign or a warning triangle in the rear win-

dow.

Safety information

Pushing the vehicle

Warning

To remove a broken-down vehicle from the

danger area, push it for a short distance at a

speed of no more than 6 mph/10 km/h.

If the approved gross vehicle weight of the

towing vehicle is lighter than the vehicle

to be towed, the tow fitting can tear off or

it will not be possible to control the vehi-

cle's response. There is a risk of accident.

Make sure that the gross vehicle weight of

the towing vehicle is heavier than the ve-

hicle to be towed.

For rolling or pushing the vehicle, refer to

page 103.

Tow truck

NOTICE

If the tow bar or tow rope is attached in-

correctly, damage to other vehicle parts

can occur. There is a risk of damage to

property. Correctly attach the tow bar or

tow rope to the tow fitting.

The vehicle should only be transported on a

loading platform.

Tow bar

The tow fittings used should be on the same

side on both vehicles.

NOTICE

The vehicle can become damaged when

lifting and securing it.

Should it prove impossible to avoid mount-

ing the tow bar at an offset angle, please fol-

low the following:

There is a risk of damage to property.

259

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Breakdown assistance

–

Maneuvering capability is limited going

around corners.

–

Use only the tow fitting provided with

the vehicle and screw it all the way in.

–

The tow bar will generate lateral forces

if it is secured with an offset.

Use the tow fitting for towing on paved

roads only.

Avoid lateral loading of the tow fitting,

for instance do not lift the vehicle by the

tow fitting.

Tow rope

Observe the following notes when using the

tow rope:

–

Check the fastening of the tow fitting in

regular intervals.

–

Use nylon ropes or straps, which will en-

able the vehicle to be towed without

jerking.

Safety information

NOTICE

–

Make sure the tow rope is not twisted

when fastening.

Check the fastening of the tow fitting

and tow rope in regular intervals.

If the tow fitting is not used as intended,

there may be damage to the vehicle or to

the tow fitting. There is a risk of damage

to property. Follow the notes on using the

tow fitting.

Do not exceed a towing speed of

30 mph/50 km/h.

Do not exceed a towing distance of

3 miles/5 km.

When starting to tow the vehicle, make

sure that the tow rope is taut.

Screw thread for tow fitting

Tow fitting

General information

Threaded holes for the tow fitting are lo-

cated in the front and rear of the vehicle on

the right side with respect to the direction

of travel.

Press on the mark on the edge of the cover

to push it out.

The screw-in tow fitting should always be

carried in the vehicle.

The tow fitting can be screwed in at the

front or rear of the vehicle.

The tow fitting and the onboard vehicle tool

kit, refer to page 250, are together in the

cargo area.

Use of the tow fitting:

260

Online Edition for Part no. 01405A02680 - II/20

Breakdown assistance

MOBILITY

What to do after an accident

Safety information

Warning

Contact with live components can lead to

an electric shock. There is a risk of inju-

ries or danger to life. After an accident, do

not touch any high-voltage components

such as orange colored high-voltage cables

or parts that are in contact with exposed

high-voltage cables.

Warning

Fluids in the high-voltage battery are cor-

rosive. There is a risk of injury. Do not

touch fluids escaping from the high-volt-

age battery.

General information

After an accident, comply with the follow-

ing safety precautions with regard to the

high-voltage system:

–

Secure the crash site.

Immediately notify rescue forces, police,

or firefighters of the fact that your vehi-

cle is equipped with a high-voltage sys-

tem.

–

Engage selector lever position P, set the

parking brake, and switch off the

standby state and drive-ready state.

–

Lock the vehicle after exiting.

Do not inhale any gases escaping from

the high-voltage battery; if needed,

maintain a safe distance from the vehi-

cle.

261

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Care

Vehicle features and options

NOTICE

When washing, water can get into the

open charging socket. There is a risk of

damage to property. Close the charging

socket flap while washing.

This chapter describes all standard, country-

specific and optional features offered with

the series. It also describes features and

functions that are not necessarily available

in your vehicle, e.g., due to the selected op-

tions or country versions. This also applies

to safety-related functions and systems.

When using these functions and systems,

the applicable laws and regulations must be

observed.

Steam jets or high-pressure

washers

Safety information

NOTICE

Washing the vehicle

When cleaning with high-pressure wash-

ers, components can be damaged due to

the pressure or temperatures being too

high. There is a risk of damage to property.

Maintain sufficient distance and do not

spray too long continuously. Follow the

operating instructions for the high-pres-

sure washer.

General information

Regularly remove foreign objects such as

leaves in the area below the windshield

when the hood is raised.

Wash your vehicle frequently, particularly

in winter. Intense soiling and road salt can

damage the vehicle.

Distances and temperature

Safety information

–

Maximum temperature: 140 ℉/60 ℃.

Minimum distance from sensors, cam-

eras, seals: 12 inches/30 cm.

Warning

Contact with live components can lead to

an electric shock. High voltage is present

at the charging connection. There is a risk

of injury or danger to life.

–

Minimum distance from glass sunroof:

31.5 in/80 cm.

Minimum distance from the charging

socket flap: 31.5 in/80 cm.

The manufacturer of your vehicle recom-

mends that work on the charging connec-

tion, for instance cleaning, be performed

by a dealer’s service center or another

qualified service center or repair shop.

262

Online Edition for Part no. 01405A02680 - II/20

Care

MOBILITY

sition N. A signal is sounded when an at-

tempt is made to lock the vehicle.

Automatic vehicle washes

Safety information

Driving out of a car wash

Ensure that the vehicle key is in the car.

NOTICE

For activating drive-ready state, refer to

page 101.

Water can penetrate in the windshield

area due to high-pressure washers. There

is a risk of damage to property. Do not

drive into high-pressure car wash systems.

Headlights

Do not rub wet headlights dry and do not

use abrasive or acidic cleaning agents.

Soak areas that have been dirtied, for in-

stance from insects, with shampoo and

wash off with water.

NOTICE

Improper use of automatic washing sys-

tems or car washes can cause damage to

the vehicle. There is a risk of damage to

property. Follow the following instruc-

tions:

Thaw ice with de-icing spray; do not use an

ice scraper.

After washing the vehicle

–

Give preference to cloth car washes

or those that use soft brushes in or-

der to avoid paint damage.

After washing the vehicle, apply the brakes

briefly to dry them; otherwise, braking ac-

tion can be reduced. The heat generated

during braking dries brake discs and brake

pads and protects them against corrosion.

–

Do not drive through a car wash with

guide rails higher than 4 in/10 cm to

avoid damage to the chassis.

Completely remove all residues on the win-

dows, to minimize loss of visibility due to

smearing and to reduce wiper noises and

wiper blade wear.

–

Observe the tire width of the guide

rail to avoid damage to tires and rims.

Fold in exterior mirrors to avoid dam-

age to the exterior mirrors.

Unscrew the rod antenna to avoid the

rod antenna breaking off.

Vehicle care

Deactivate the wiper and, if neces-

sary, rain sensor to avoid damage to

the wiper system.

Vehicle care products

General information

MINI recommends using vehicle care and

cleaning products from MINI. Suitable care

products are available from a dealer’s serv-

ice center or another qualified service cen-

ter or repair shop.

Driving into a car wash

In car washes, the vehicle must be able to

roll freely.

Rolling or pushing the vehicle, refer to

page 101.

Some car washes do not permit persons in

the vehicle. The vehicle cannot be locked

from the outside when in selector lever po-

263

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Care

Clean light-colored leather more frequently

because soiling on such surfaces is substan-

tially more visible.

Safety information

Warning

Use leather care products; otherwise, dirt

and grease will gradually break down the

protective layer of the leather surface.

Cleansers can contain substances that are

dangerous and harmful to your health.

There is a risk of injury. When cleaning

the interior, open the doors or windows.

Only use products intended for cleaning

vehicles. Follow the instructions on the

container.

Upholstery material care

General information

Vacuum the upholstery regularly with a

vacuum cleaner.

Vehicle paint

If upholstery is very dirty, for instance with

beverage stains, use a soft sponge or micro-

fiber cloth with a suitable interior cleaner.

General information

Regular care contributes to driving safety

and value retention. Environmental influen-

ces in areas with elevated air pollution or

natural contaminants, such as tree resin or

pollen can affect the vehicle's paintwork.

Tailor the frequency and extent of your ve-

hicle care to these influences.

Clean the upholstery down to the seams us-

ing large sweeping motions. Avoid rubbing

the material vigorously.

Safety information

NOTICE

Aggressive substances such as oil, grease or

bird droppings, must be removed immedi-

ately to prevent the finish from being al-

tered or discolored.

Open Velcro® fasteners on articles of

clothing can damage the seat covers.

There is a risk of damage to property. En-

sure that any Velcro® fasteners are closed.

Matte finish

Only use cleaning and care products suita-

ble for vehicles with matte finish.

Caring for special components

Light-alloy wheels

When cleaning the vehicle, use only neutral

wheel cleaners having a pH value from 5 to

9. Do not use abrasive cleaning agents or

steam jets above 140 ℉/60 ℃. Follow the

manufacturer's instructions.

Leather care

Remove dust from the leather regularly, us-

ing a cloth or vacuum cleaner.

Otherwise, particles of dust and road grime

chafe in pores and folds, and lead to in-

creased wear and premature degradation of

the leather surface.

Aggressive, acidic or alkaline cleaning

agents can destroy the protective layer of

adjacent components, such as the brake

disc.

To guard against discoloration, such as from

clothing, clean leather and provide leather

care roughly every two months.

After cleaning, apply the brakes briefly to

dry them. The heat generated during brak-

264

Online Edition for Part no. 01405A02680 - II/20

Care

MOBILITY

ing dries brake discs and brake pads and

protects them against corrosion.

Safety belts

Warning

Chrome surfaces

Chemical cleansers can destroy the safety

belt webbing. Missing protective effect of

the safety belts. There is a risk of injuries

or danger to life. Use only a mild soapy sol-

ution for cleaning the safety belts.

Carefully clean components such as the ra-

diator grille or door handles with plenty of

water, possibly with shampoo added, partic-

ularly when they have been exposed to road

salt.

Dirty belt straps impede the reeling action

and thus have a negative impact on safety.

Rubber components

Environmental influences can cause surface

soiling of rubber parts and a loss of gloss.

Use only water and suitable cleaning agents

for cleaning.

Use only a mild soapy solution, with the

safety belts clipped into their buckles.

Safety belts should only be allowed to re-

tract if they are dry.

Treat especially worn rubber parts with rub-

ber care agents at regular intervals. When

cleaning rubber seals, do not use any sili-

con-containing vehicle care products in or-

der to avoid damage or noises.

Carpets and floor mats

Warning

Objects in the driver's floor area can limit

the pedal distance or block a depressed

pedal. There is a risk of accident. Stow ob-

jects in the vehicle such that they are se-

cured and cannot enter into the driver's

floor area. Use floor mats that are suitable

for the vehicle and can be safely attached

to the floor. Do not use loose floor mats

and do not layer several floor mats. Make

sure that there is sufficient clearance for

the pedals. Ensure that the floor mats are

securely fastened again after they were re-

moved, for instance for cleaning.

Fine wood parts

Clean fine wood facing and fine wood com-

ponents only with a moist rag. Then dry

with a soft cloth.

Plastic components

NOTICE

Cleansers that contain alcohol or solvents,

such as lacquer thinners, heavy-duty

grease removers, fuel, or such, can damage

plastic parts. There is a risk of damage to

property. Clean with a microfiber cloth.

Dampen the cloth lightly with water, if

needed.

Floor mats can be removed from the car's

interior for cleaning.

If the floor carpets are very dirty, clean with

a microfiber cloth and water or a textile

cleaner. To prevent matting of the carpet,

rub back and forth in the direction of travel

only.

Clean with a microfiber cloth.

Dampen the cloth lightly with water, if

needed.

Do not soak the roofliner.

265

Online Edition for Part no. 01405A02680 - II/20

MOBILITY

Care

Sensor/camera lenses

General information

To clean sensors and camera lenses, use a

cloth moistened with a small amount of

glass detergent.

Your dealer's service center or another

qualified service center or repair shop can

advise you on what to consider when stor-

ing the vehicle for longer than three

months.

Displays/Screens/Projection lenses

Safety information

NOTICE

Chemical cleansers, moisture or fluids of

any kind can damage the surface of dis-

plays and screens. There is a risk of dam-

age to property. Clean with a clean, anti-

static microfiber cloth.

NOTICE

The high-voltage battery can be damaged

if left uncharged or with low charge for ex-

tended periods. There is a risk of damage

to property. Before storing the vehicle for

an extended period, ensure that the high-

voltage battery is fully charged. During the

idle period, connect the vehicle to a charg-

ing station at a compatible charging loca-

tion. If necessary, the high-voltage battery

will be charged automatically. Make sure

that charging is carried out. Regularly

check the charge state.

NOTICE

The surface of displays can be damaged

with improper cleaning. There is a risk of

damage to property. Avoid pressure that is

too high and do not use any scratching

materials.

Do not allow the vehicle to sit idle for lon-

ger than four weeks with a charge state

below approx. 80 %.

Clean with a clean, antistatic microfiber

cloth.

For stubborn soiling on the projection lens

of the Head-up Display, dampen the micro-

fiber cloth with alcohol. Projection lens, re-

fer to page 132.

Long idle times and long-term

vehicle storage

Concept

For idle phases that last several weeks, park

the vehicle with the high-voltage battery

fully charged, if possible.

Do not park the vehicle for longer than

14 days if the electric range is exhausted.

With storage times of up to three months, if

possible plug the vehicle into a compatible

power source or park it with the high-volt-

age battery as fully charged as possible.

266

Online Edition for Part no. 01405A02680 - II/20

Care

MOBILITY

267

Online Edition for Part no. 01405A02680 - II/20

MOBILITY for Your Mini Cooper 2 Door Third Generation (2016-2023)

Related Topics

Popular Owner Manuals

Latest Owner Manuals