2016-2023 Mini Cooper 2 Door MOBILITY -> Maintenance User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

MOBILITY -> Maintenance for Your Mini Cooper 2 Door Third Generation (2016-2023)

MOBILITY  
Maintenance  
Maintenance  
The manufacturer of your vehicle recom-  
mends that the work on the vehicle, in par-  
ticular maintenance and repair, be per-  
formed by a dealer’s service center or  
another qualified service center or repair  
shop.  
Vehicle features and options  
This chapter describes all standard, country-  
specific and optional features offered with  
the series. It also describes features and  
functions that are not necessarily available  
in your vehicle, e.g., due to the selected op-  
tions or country versions. This also applies  
to safety-related functions and systems.  
When using these functions and systems,  
the applicable laws and regulations must be  
observed.  
Condition Based Service CBS  
Concept  
Sensors and special algorithms take into ac-  
count the driving conditions of the vehicle.  
CBS uses these to calculate the need for  
maintenance.  
MINI maintenance system  
The system makes it possible to adapt the  
amount of maintenance corresponding to  
your user profile.  
The maintenance system provides service  
notifications and thereby provides support  
in maintaining road safety and the opera-  
tional reliability of the vehicle.  
General information  
Information on service notifications, refer  
to page 126, can be displayed on the Control  
Display.  
In some cases, scopes and intervals of the  
maintenance system may vary according to  
the country version. Replacement work,  
spare parts, fuels and lubricants, and wear  
materials are calculated separately. Further  
information is available from a dealer's serv-  
ice center or another qualified service cen-  
ter or repair shop.  
Service data in the vehicle key  
Information on the service notifications is  
continuously stored in the vehicle key. The  
service center can read this data out and  
suggest a maintenance scope for the vehi-  
cle.  
Safety information  
Therefore, hand the service advisor the ve-  
hicle key with which the vehicle was driven  
most recently.  
DANGER  
Improperly performed work, in particular  
maintenance and repair on the high-volt-  
age system, can lead to electric shock.  
There is a risk of injury, fire and danger to  
life.  
Storage periods  
Storage periods during which the vehicle  
battery was disconnected are not taken into  
account.  
248  
Online Edition for Part no. 01405A02680 - II/20  
Maintenance  
MOBILITY  
Have a dealer's service center or another  
qualified service center or repair shop up-  
date the time-dependent maintenance pro-  
cedures, such as checking brake fluid and  
changing the microfilter/activated-charcoal  
filter.  
Safety information  
NOTICE  
The socket for Onboard Diagnosis is an in-  
tricate component intended to be used in  
conjunction with specialized equipment to  
check the vehicle’s primary emissions sys-  
tem. Improper use of the socket for On-  
board Diagnosis, or contact with the  
socket for Onboard Diagnosis for other  
than its intended purpose, can cause vehi-  
cle malfunctions and creates risks of per-  
sonal and property damage. Given the fore-  
going, the manufacture of your vehicle  
strongly recommends that access to the  
socket for Onboard Diagnosis be limited to  
a dealer's service center or another quali-  
fied service center or repair shop or other  
persons that have the specialized training  
and equipment for purposes of properly  
utilizing the socket for Onboard Diagnosis.  
Maintenance Manual and  
Service and Warranty Infor-  
mation Booklet for US models  
and Warranty and Service  
Guide Booklet for Canadian  
models  
Please consult your Maintenance Manual  
and Service and Warranty Information  
Booklet for US models and Warranty and  
Service Guide Booklet for Canadian models  
for additional information on the perform-  
ance of service and maintenance work.  
The manufacturer of your vehicle recom-  
mends that maintenance and repair be per-  
formed by a service center or another quali-  
fied service center or repair shop. Records  
of regular maintenance and repair work  
should be retained.  
Position  
Socket for OBD Onboard Diag-  
nosis  
There is an OBD socket on the driver's side  
for checking the primary components in the  
vehicle's emissions.  
General information  
Devices connected to the OBD socket trig-  
ger the alarm system when the vehicle is  
locked. Remove any devices connected at  
the OBD socket before locking the vehicle.  
249  
Online Edition for Part no. 01405A02680 - II/20  

Related Topics

Popular Owner Manuals