2016-2023 Mini Cooper 2 Door MOBILITY -> Coolant User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

MOBILITY -> Coolant for Your Mini Cooper 2 Door Third Generation (2016-2023)

MOBILITY  
Coolant  
Coolant  
Vehicle features and options  
Warning  
Additives are harmful and incorrect addi-  
tives can damage the drive system. There  
is a risk of injury and risk of damage to  
property. Do not allow additives to come  
into contact with skin, eyes or articles of  
clothing. Use suitable additives only.  
This chapter describes all standard, country-  
specific and optional features offered with  
the series. It also describes features and  
functions that are not necessarily available  
in your vehicle, e.g., due to the selected op-  
tions or country versions. This also applies  
to safety-related functions and systems.  
When using these functions and systems,  
the applicable laws and regulations must be  
observed.  
NOTICE  
Loss of coolant may damage the drive sys-  
tem. There is a risk of damage to property.  
Make sure that there is sufficient coolant  
in the reservoir at all times. Always have  
coolant added by a dealer's service center  
or another qualified service center or re-  
pair shop.  
General information  
Coolant consists of water and additives.  
Not all commercially available additives are  
suitable for the vehicle. Do not mix addi-  
tives of different colors. Observe the water -  
additive mixing ratio of 50:50. Information  
about suitable additives is available from a  
dealer’s service center or another qualified  
service center or repair shop.  
Coolant level  
Checking  
There are yellow Min and Max marks in the  
coolant reservoir.  
Safety information  
1. Allow the drive system to cool down.  
2. Open the hood, refer to page 244.  
Warning  
3. Turn the lid of the coolant reservoir  
slightly counterclockwise to allow any  
With the drive system hot and the cooling  
system open, coolant can escape and lead  
to scalding. There is a risk of injury. Only  
open the cooling system with the drive  
system cooled down.  
246  
Online Edition for Part no. 01405A02680 - II/20  
Coolant  
MOBILITY  
excess pressure to dissipate, then open  
it.  
4. Open the coolant reservoir lid.  
5. The coolant level is correct if it lies be-  
tween the minimum and maximum  
marks in the filler neck.  
6. Close the lid.  
When the coolant level is low, check the  
cooling system and add coolant. Have the  
cooling system checked and coolant added  
by a dealer’s service center or another  
qualified service center or repair shop.  
Disposal  
Comply with the relevant environ-  
mental protection regulations when  
disposing of coolant and coolant ad-  
ditives.  
247  
Online Edition for Part no. 01405A02680 - II/20  

Related Topics

Popular Owner Manuals