2010-2019 Nissan Juke SUV Pre-driving checks and adjustments User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Pre-driving checks and adjustments for Your Nissan Juke SUV First Generation (2010-2019)

3 Pre-driving checks and adjustments  
Keys ............................................................................................................. 3-2  
NISSAN Anti-Theft System (NATS) key (if equipped) ............ 3-2  
Intelligent Key (if equipped) ........................................................... 3-2  
Door locks ................................................................................................. 3-3  
Locking with key ................................................................................ 3-3  
Locking with inside lock knob ....................................................... 3-4  
Locking with power door lock switch .......................................... 3-4  
Vehicle speed sensing door lock mechanism (if equipped) .... 3-4  
Auto door lock releasing mechanism (if equipped) ................. 3-4  
Child safety rear door lock ............................................................. 3-5  
Remote keyless entry system (if equipped) ..................................... 3-5  
Using remote keyless entry system .............................................. 3-5  
Intelligent Key system (if equipped) ................................................... 3-6  
Operating range ................................................................................ 3-8  
Using Intelligent Key system .......................................................... 3-8  
Opening back door ....................................................................... 3-10  
Battery saver system ..................................................................... 3-10  
Warning and audible reminders ................................................. 3-10  
Troubleshooting guide .................................................................. 3-11  
Using remote keyless entry function ...................................... 3-12  
Hazard indicator and horn operation ...................................... 3-13  
Security system .................................................................................... 3-14  
Theft warning system (if equipped) ........................................ 3-14  
NISSAN Anti-Theft System (NATS) ....................................... 3-15  
Hood ....................................................................................................... 3-15  
Opening hood .............................................................................. 3-16  
Closing hood ................................................................................ 3-16  
Back door .............................................................................................. 3-16  
Back door release lever ............................................................. 3-17  
Fuel filler lid ........................................................................................... 3-17  
Opening fuel filler lid .................................................................. 3-17  
Fuel filler cap ................................................................................ 3-17  
Steering wheel ...................................................................................... 3-18  
Mirrors ..................................................................................................... 3-18  
Inside rearview mirror ................................................................. 3-18  
Outside rearview mirrors ........................................................... 3-19  
Vanity mirror (if equipped) ......................................................... 3-20  
Parking brake ........................................................................................ 3-20  
KEYS  
used with one vehicle. The new keys must be  
registered by a NISSAN dealer prior to use with the  
NATS of your vehicle. Since the registration process  
requires erasing all memory in the NATS components  
when registering new keys, be sure to take all NATS  
keys that you have to the NISSAN dealer.  
Your vehicle can only be driven with the keys specific  
to your vehicle. A key number plate is supplied with  
your key. Record the key number and keep the key  
number plate in a safe place, except in the vehicle, in  
case of the need to duplicate the keys.  
The key can only be duplicated using an original key or  
the original key number. The key number is required  
when you have lost all of the keys and do not have the  
original key to duplicate from. If the key is lost, or you  
need extra keys, provide an original key or the key  
number to a NISSAN dealer.  
CAUTION:  
Do not allow the NATS key, which contains an  
electrical transponder, to come into contact with  
water or salt water. This could affect the system  
function.  
SPA2502  
Type B (without panic alarm)  
Intelligent Key (2)  
1.  
2.  
3.  
CAUTION:  
*: Immobilizer  
Mechanical key (inside the Intelligent Key) (2)  
Key number plate  
Do not leave the keys inside the vehicle when  
leaving the vehicle.  
INTELLIGENT KEY (if equipped)  
Your vehicle can only be driven with the Intelligent  
Keys, which are registered to your vehicle’s Intelligent  
Key system components and NISSAN Anti-Theft  
System (NATS*) components. As many as 4 Intelligent  
Keys can be registered and used with one vehicle. The  
new keys must be registered by a NISSAN dealer prior  
to use with the Intelligent Key system and NATS of your  
vehicle. Since the registration process requires erasing  
all memory in the Intelligent Key components when  
registering new keys, be sure to take all Intelligent Keys  
that you have to the NISSAN dealer.  
NISSAN ANTI-THEFT SYSTEM (NATS*) KEY  
(if equipped)  
SPA2406  
*: Immobilizer  
Type A (with panic alarm)  
CAUTION:  
SPA2863  
.
.
Be sure to carry the Intelligent Key with you.  
Do not leave the vehicle with the Intelligent  
Key inside.  
1
2
3
NATS key  
Master key  
Key number plate  
Be sure to carry the Intelligent Key with you  
when driving. The Intelligent Key is a preci-  
sion device with a built-in transmitter. To  
avoid damaging it, please note the follow-  
Your vehicle can only be driven with the NATS keys,  
which are registered to your vehicle’s NATS compo-  
nents. As many as 5 NATS keys can be registered and  
3-2 Pre-driving checks and adjustments  
DOOR LOCKS  
ing.  
Mechanical key  
WARNING:  
— The Intelligent Key is water resistant;  
however, wetting may damage the In-  
telligent Key. If the Intelligent Key gets  
wet, immediately wipe until it is com-  
pletely dry.  
.
.
Always look before opening any doors, to  
avoid an accident with oncoming traffic.  
Never leave children or adults who would  
normally require the support of others alone  
in the vehicle. They could unknowingly  
activate switches or controls and inadver-  
tently become involved in a serious accident.  
— Do not bend, drop or strike it against  
another object.  
— If the outside temperature is below  
−108C (148F), the battery of the Intelli-  
gent Key may not function properly.  
LOCKING WITH KEY  
SPA2033  
— Do not place the Intelligent Key for an  
extended period in a place where tem-  
peratures exceed 608C (1408F).  
To remove the mechanical key, release the lock knob at  
the back of the Intelligent Key.  
To install the mechanical key, firmly insert it into the  
Intelligent Key until the lock knob returns to the lock  
position.  
— Do not change or modify the Intelligent  
Key.  
— Do not use a magnet key holder.  
Use the mechanical key to lock or unlock the doors.  
(See “Door locks” (P.3-3).)  
— Do not place the Intelligent Key near  
equipment that produces  
a
magnetic  
field such as a TV, audio equipment  
and personal computers.  
SPA2602  
To lock the door, insert the key to the door key cylinder  
— Do not allow the Intelligent Key to come  
into contact with water or salt water,  
1
and turn the key to the front side of the vehicle  
The driver’s side door will lock.  
.
*
and do not wash it in  
a
washing  
To unlock the door, turn the key to the rear of the  
machine. This could affect the system  
function.  
2
vehicle  
. The driver’s side door will unlock.  
*
.
If an Intelligent Key is lost or stolen, NISSAN  
recommends erasing the ID code of that  
Intelligent Key. This will prevent the Intelli-  
gent Key from unauthorized use to unlock  
the vehicle. For information regarding the  
erasing procedure, please contact a NISSAN  
dealer.  
Pre-driving checks and adjustments 3-3  
Type B:  
When the Intelligent Key is left inside of the vehicle  
and any door is open.  
LOCKING WITH INSIDE LOCK KNOB  
LOCKING WITH POWER DOOR LOCK  
SWITCH  
.
VEHICLE SPEED SENSING DOOR LOCK  
MECHANISM (if equipped)  
All doors will be locked automatically when the vehicle  
speed reaches 24 km/h (15 MPH) (for Mexico) or 10  
km/h (6 MPH) (except for Mexico). Once the lock has  
been unlocked, while driving, the vehicle speed  
sensing door lock mechanism will not lock the door  
again unless one of the following is performed.  
SPA2603  
.
.
Opening any doors.  
SPA2803  
Placing the ignition switch in the “LOCK” position.  
Driver’s armrest  
CAUTION:  
AUTO DOOR LOCK RELEASING ME-  
CHANISM (if equipped)  
All doors will be unlocked automatically when the  
ignition switch is moved from “ON” to “OFF” position.  
When locking the doors using the inside lock  
knob, be sure not to leave the key in the vehicle.  
CAUTION:  
When locking the doors using the power door  
lock switch, be sure not to leave the key in the  
vehicle.  
To lock the front doors, push the inside lock knob to  
1
the lock position  
, and then close the door while  
*
pulling the door handle.  
To activate or deactivate auto door lock  
releasing mechanism  
To activate or deactivate the auto door lock releasing  
mechanism, perform the following procedures.  
To lock the doors, push the power door lock switch to  
To lock the rear doors, push the inside lock knob to the  
1
the lock position  
with the driver’s door open, then  
*
1
lock position  
and then close the door.  
*
close the door while pulling the door handle. All doors  
including the back door will lock.  
To unlock, pull the inside lock knob to the unlock  
2
*
position  
.
1. Place the ignition switch in the “ON” position.  
To unlock, push the power door lock switch to the  
2
*
unlock position  
.
2. Within 20 seconds, push and hold the power door  
lock switch to the “UNLOCK” position for  
seconds.  
5
Lockout protection  
The power door lock switch will not lock the doors  
under the following conditions:  
3. The hazard indicator light will flash as follows if the  
switching operation is successful:  
Type A:  
.
.
Twice — activated  
.
When the key is in the ignition switch and the  
driver’s door is open.  
Once — deactivated  
.
When any door except for the driver’s door is  
open.  
3-4 Pre-driving checks and adjustments  
REMOTE KEYLESS ENTRY SYSTEM  
(if equipped)  
The remote keyless entry system can operate all door  
locks (including the back door) using the remote  
controller. The remote controller can operate at a  
distance of approximately 1 m (3.3 ft) away from the  
vehicle. The operating distance depends upon the  
conditions around the vehicle.  
tures exceed 608C (1408F).  
remote controller is lost or stolen, NISSAN  
CHILD SAFETY REAR DOOR LOCK  
If  
a
recommends erasing the ID code of that remote  
controller from the vehicle. This may prevent the  
unauthorized use of the remote controller to unlock  
the vehicle. For information regarding the erasing  
procedure, contact a NISSAN dealer.  
As many as 5 remote controllers can be used with one  
vehicle. For information about the purchase and use of  
additional remote controllers, contact a NISSAN deal-  
er.  
For information regarding the replacement of a battery,  
see “Battery” (P.8-15).  
USING REMOTE KEYLESS ENTRY SYSTEM  
The remote controller will not function under the  
following conditions:  
SPA2801  
.
When the distance between the remote controller  
and vehicle is more than approximately 1 m (3.3  
ft).  
The child safety rear door locks help prevent rear doors  
from being opened accidentally, especially when small  
children are in the vehicle.  
.
.
When the remote controller battery is discharged.  
When the key is in the ignition switch.  
1
*
When the levers are in the lock position  
, the child  
safety rear door locks engage and the rear doors can  
only be opened by the outside door handles.  
CAUTION:  
To disengage, move the levers to the unlock position  
2
.
*
.
.
When locking the doors using the remote  
controller, be sure not to leave the key in the  
vehicle.  
JVP0222X  
1
LOCK button  
*
Do not allow the remote controller, which  
contains electrical components, to come  
into contact with water or salt water. This  
could affect the system function.  
2
UNLOCK button  
*
3
Battery indicator light  
*
Locking doors  
1. Remove the ignition key.  
2. Close all doors.  
1
on the remote  
.
.
Do not drop the remote controller.  
Do not strike the remote controller sharply  
against another object.  
3. Push the “LOCK”  
controller.  
button  
*
.
.
If the outside temperature is below −108C  
(148F), the battery of the remote controller  
may not function properly.  
4. All doors will be locked.  
5. Operate door handles to confirm that the doors  
have been securely locked.  
Do not place the remote controller for an  
extended period in an area where tempera-  
Pre-driving checks and adjustments 3-5  
INTELLIGENT KEY SYSTEM (if  
equipped)  
Perform the same procedure to deactivate the  
selective door unlock mode.  
CAUTION:  
After locking the doors using the remote con-  
troller, be sure that the doors have been securely  
locked by operating the door handles.  
Battery indicator light  
The battery indicator light  
push any button. If the light does not illuminate, the  
battery is weak or needs replacement. For information  
regarding replacement of  
controller battery” (P.8-16).  
3
illuminates when you  
*
Unlocking doors  
a
battery, see “Remote  
1. Push the “UNLOCK”  
controller.  
button on the remote  
Hazard indicator operation  
2. All doors will be unlocked.  
SPA2406  
When you lock or unlock the doors, the hazard  
indicator will flash as a confirmation.  
All doors will be locked automatically unless one of the  
following operations is performed within 30 seconds  
Type A (with panic alarm)  
after pushing the “UNLOCK”  
button.  
.
.
“LOCK”: The hazard indicator flashes once.  
“UNLOCK”: The hazard indicator flashes twice.  
.
.
Opening any doors.  
Inserting the key into the ignition switch.  
Selecting door unlock mode (if equipped):  
When you first receive the vehicle, the door unlock  
mode is set to unlock all the doors with one push of the  
2
“UNLOCK”  
button  
. The door unlock mode  
*
can be switched to the selective door unlock mode,  
which unlocks the driver’s door at the second push of  
SPA2502  
2
*
the “UNLOCK”  
button  
.
Type B (without panic alarm)  
Intelligent Key (2)  
Selective door unlock mode:  
1.  
2.  
3.  
Mechanical key (inside the Intelligent Key) (2)  
Key number plate  
2
1. Push the “UNLOCK”  
remote controller.  
button  
button  
on the  
on the  
*
2. The driver’s door unlocks.  
WARNING:  
2
*
3. Push the “UNLOCK”  
remote controller again.  
.
Radio waves could adversely affect electric  
medical equipment. Those who use a pace-  
maker should contact the electric medical  
equipment manufacturer for the possible  
influences before use.  
4. All doors will be unlocked.  
To switch to the selective door unlock mode, perform  
the following procedure.  
Push the “LOCK”  
simultaneously for more than 4 seconds.  
and “UNLOCK”  
buttons  
.
The Intelligent Key transmits radio waves  
when the buttons are pushed. The radio  
3-6 Pre-driving checks and adjustments  
waves may affect aircraft navigation and  
communication systems. Do not operate the  
Intelligent Key while on an airplane. Make  
sure the buttons are not operated uninten-  
tionally when the unit is stored during a  
flight.  
.
.
When any type of radio wave remote control is  
used nearby.  
.
Do not strike the Intelligent Key sharply  
against another object.  
When the Intelligent Key is placed near an electric  
appliance such as a personal computer.  
.
.
Do not change or modify the Intelligent Key.  
Wetting may damage the Intelligent Key. If  
the Intelligent Key gets wet, immediately  
wipe until it is completely dry.  
In such cases, correct the operating conditions before  
using the Intelligent Key function or use the mechanical  
key.  
The Intelligent Key system can operate all the door  
(including the back door) locks using the remote  
controller function or pushing the request switch on  
the vehicle without taking the key out from a pocket or  
purse. The operating environment and/or conditions  
may affect the Intelligent Key system operation.  
.
.
If the outside temperature is below −108C  
(148F), the battery of the Intelligent Key may  
not function properly.  
Although the life of the battery varies depending on the  
operating conditions, the battery’s life is approximately  
2 years. If the battery is discharged, replace it with a  
new one.  
Do not place the Intelligent Key for an  
extended period in an area where tempera-  
tures exceed 608C (1408F).  
For information regarding replacement of a battery, see  
“Battery” (P.8-15).  
Be sure to read the following before using the  
Intelligent Key system.  
.
.
Do not attach the Intelligent Key with a key  
holder that contains a magnet.  
Since the Intelligent Key is continuously receiving radio  
waves, if the key is left near equipment which transmits  
strong radio waves, such as signals from a TV and  
personal computer, the battery life may become  
shorter.  
Do not place the Intelligent Key near equip-  
ment that produces a magnetic field, such as  
a TV, audio equipment and personal compu-  
ters.  
CAUTION:  
.
.
Be sure to carry the Intelligent Key with you  
when operating the vehicle.  
Because the steering wheel is locked electrically (if  
equipped), unlocking the steering wheel with the  
ignition switch in the “LOCK” position is impossible  
when the vehicle battery is completely discharged. Pay  
special attention that the vehicle battery is not  
completely discharged.  
Never leave the Intelligent Key in the vehicle  
when you leave the vehicle.  
If an Intelligent Key is lost or stolen, NISSAN  
recommends erasing the ID code of that Intelligent  
Key from the vehicle. This may prevent the unauthor-  
ized use of the Intelligent Key to operate the vehicle.  
For information regarding the erasing procedure,  
contact a NISSAN dealer.  
The Intelligent Key is always communicating with the  
vehicle as it receives radio waves. The Intelligent Key  
system transmits weak radio waves. Environmental  
conditions may interfere with the operation of the  
Intelligent Key system under the following operating  
conditions.  
As many as 4 Intelligent Keys can be used with one  
vehicle. For information about the purchase and use of  
additional Intelligent Keys, contact a NISSAN dealer.  
The Intelligent Key function can be disabled. For  
information about disabling the Intelligent Key function,  
contact a NISSAN dealer.  
.
When operating near a location where strong  
radio waves are transmitted, such as a TV tower,  
power station and broadcasting station.  
CAUTION:  
.
.
Do not allow the Intelligent Key, which  
contains electrical components, to come  
into contact with water or salt water. This  
could affect the system function.  
.
.
When in possession of wireless equipment, such  
as a cellular telephone, transceiver, and CB radio.  
When the Intelligent Key is in contact with or  
covered by metallic materials.  
Do not drop the Intelligent Key.  
Pre-driving checks and adjustments 3-7  
.
.
When the Intelligent Key is left inside the vehicle  
OPERATING RANGE  
When the Intelligent Key is not within the  
operational range  
.
.
.
When any door is open or not closed securely  
When the Intelligent Key battery is discharged  
When the ignition switch is in the “ACC” or “ON”  
position  
SPA2074  
handle or rear bumper the request switches may not  
function.  
When the Intelligent Key is within the operating range,  
it is possible for anyone, even someone who does not  
carry the Intelligent Key, to push the request switch  
and lock/unlock the doors.  
SPA2407  
.
Do not push the door handle request switch with  
the Intelligent Key held in your hand as illustrated.  
The close distance to the door handle will cause  
the Intelligent Key system to have difficulty  
recognizing that the Intelligent Key is outside the  
vehicle.  
USING INTELLIGENT KEY SYSTEM  
SPA2075  
The Intelligent Key functions can only be used when  
the Intelligent Key is within the specified operating  
.
.
After locking the doors using the door handle  
request switch, make sure that the doors have  
been securely locked by operating the door  
handles.  
1
*
range from the request switch  
.
When the Intelligent Key battery is discharged or  
strong radio waves are present near the operating  
location, the Intelligent Key system’s operating range  
becomes narrower, and the Intelligent Key may not  
function properly.  
When locking the doors using the door handle  
request switch, make sure to have the Intelligent  
Key in your possession before operating the door  
handle request switch to prevent the Intelligent  
Key from being left in the vehicle.  
SPA2408  
The request switch will not function under the following  
conditions:  
The operating range is within 80 cm (31.50 in) from  
.
The door handle request switch is operational only  
when the Intelligent Key has been detected by the  
Intelligent Key system.  
1
each request switch  
.
*
If the Intelligent Key is too close to the door glass,  
3-8 Pre-driving checks and adjustments  
.
Do not pull the door handle before pushing the  
door handle request switch. The door will be  
unlocked but will not open. Release the door  
handle once and pull it again to open the door.  
.
.
.
When the Intelligent Key is placed inside of  
the glove box.  
Locking doors  
1. Push the ignition switch to the “OFF” position.  
When the Intelligent Key is placed inside of  
the door pockets.  
2. Carry the Intelligent Key with you.  
3. Close all doors.  
When the Intelligent Key is placed inside or  
near metallic materials.  
A
*
4. Push the door handle request switch  
(driver’s  
or front passenger’s) or the back door request  
The lockout protection may function when the  
Intelligent Key is outside the vehicle but is too  
close to the vehicle.  
B
switch  
.
*
5. All doors and the back door will be locked.  
6. Operate door handles to confirm that the doors  
have been securely locked.  
Unlocking doors  
Lockout protection:  
Switching door unlock mode (if equipped):  
To prevent the Intelligent Key from being accidentally  
locked in the vehicle, lockout protection is equipped  
with the Intelligent Key system.  
To switch the door unlock mode from one to another,  
see “Using remote keyless entry function” (P.3-12).  
SPA2710  
Selective door unlock mode (if equipped):  
.
When the Intelligent Key is left in the vehicle and  
you try to lock the door using the driver’s inside  
lock knob after getting out of the vehicle, all the  
doors will unlock automatically and a chime will  
sound after the door is closed.  
1. Carry the Intelligent Key with you.  
A
2. Push the door handle request switch  
or the  
*
B
back door request switch  
.
*
3. Driver’s door handle or back door request switch:  
Only the corresponding door will be unlocked.  
Front passenger’s door handle request switch:  
.
When the Intelligent Key is left in the vehicle while  
the driver’s door is opened and you try to lock the  
door using the power door lock switch after  
getting out of the vehicle, an inside warning chime  
will sound after the power door lock switch or the  
driver’s inside lock knob is operated.  
All doors (including the back door) will be  
unlocked. (Selective door unlock mode is not  
available.)  
SPA2545  
4. Push the door handle request switch again within  
5 seconds.  
When you carry the Intelligent Key with you, you can  
lock or unlock all doors by pushing the door handle  
CAUTION:  
A
request switch (driver’s or front passenger’s)  
or  
*
5. All doors will be unlocked.  
The lockout protection may not function under  
the following conditions:  
B
back door request switch  
operation.  
within the range of  
*
6. Operate the door handles to open the doors.  
.
When the Intelligent Key is placed on top of  
the instrument panel.  
When you lock or unlock the doors or open the back  
door, the hazard indicator will flash and the outside  
chime will sound as a confirmation. For details, see  
“Hazard indicator and horn operation” (P.3-13).  
.
When the Intelligent Key is placed on the  
cargo cover (if equipped).  
Pre-driving checks and adjustments 3-9  
All door unlock mode:  
BATTERY SAVER SYSTEM  
1. Carry the Intelligent Key with you.  
When all the following conditions are met for a period  
of time, the battery saver system will cut off the power  
supply to prevent battery discharge.  
A
*
2. Push the door handle request switch  
or back  
B
door request switch  
.
*
.
.
.
The ignition switch is in the “ACC” position, and  
All doors are closed, and  
3. All doors and the back door will be unlocked.  
If a door handle is pulled while unlocking the doors,  
that door may not be unlocked. Returning the door  
handle to its original position will unlock the door. If the  
door does not unlock, after returning the door handle,  
push the door handle request switch to unlock the  
door.  
The shift lever is in the “P” (Park) position.  
(Continuously Variable Transmission models)  
WARNING AND AUDIBLE REMINDERS  
The Intelligent Key system is equipped with a function  
that is designed to minimize improper operations of the  
Intelligent Key and to help prevent the vehicle from  
being stolen. A chime or beep sounds inside and  
outside the vehicle and a warning light illuminates or  
blinks.  
All doors will be locked automatically unless one of the  
following operations is performed within 1 minute or 30  
seconds after pushing the request switch while the  
doors are locked.  
.
.
Opening any doors.  
See the troubleshooting guide on the next page and  
“Warning/indicator lights and audible reminders” (P.2-  
11).  
Pushing the ignition switch.  
If during the preset time period the “UNLOCK”  
button on the Intelligent Key is pushed, all doors will be  
locked automatically after the next preset time.  
Intelligent Key system warning light:  
P position selecting warning light:  
OPENING BACK DOOR  
CAUTION:  
1. Carry the Intelligent Key.  
c
2. Push the back door opener switch  
.
*
When the chime or beep sounds or the warning  
light illuminates or blinks, be sure to check both  
the vehicle and the Intelligent Key.  
3. All doors and the back door will be unlocked.  
4. Open the back door.  
3-10 Pre-driving checks and adjustments  
TROUBLESHOOTING GUIDE  
Symptom  
The P position selecting warning light in  
Possible cause  
Action to take  
the meter illuminates and the inside  
warning chime sounds continuously or  
for a few seconds. (Continuously Variable  
Transmission models)  
When pushing the ignition switch to stop  
the engine  
The shift lever is not in the “P” (Park)  
position.  
Shift the shift lever to the “P” (Park)  
position.  
The inside warning chime sounds con-  
tinuously. (Continuously Variable Trans-  
mission models)  
When shifting the shift lever to the P  
(Park) position  
The ignition switch is in the “ACC” or  
“ON” position.  
Push the ignition switch to the “OFF”  
position.  
When opening the driver’s door to get  
out of the vehicle  
The inside warning chime sounds con- The ignition switch is in the “ACC”  
Push the ignition switch to the “OFF”  
position.  
tinuously.  
position.  
The Intelligent Key system warning light  
in the meter blinks in yellow, the outside The ignition switch is in the “ACC” or  
Push the ignition switch to the “OFF”  
position.  
chime sounds 3 times and the inside  
warning chime sounds for a few seconds.  
“ON” position.  
When closing the door after getting out  
of the vehicle  
The P position selecting warning light in  
the meter illuminates and the outside  
chime sounds continuously. (Continu-  
ously Variable Transmission models)  
The ignition switch is in the “ACC” or  
“OFF” position and the shift lever is not in position and push the ignition switch to  
the “P” (Park) position. the “OFF” position.  
Move the shift lever to the “P” (Park)  
When pushing the request switch or the  
The outside chime sounds for a few  
seconds and all the doors unlock.  
“LOCK”  
button on the Intelligent  
The Intelligent Key is inside the vehicle. Carry the Intelligent Key with you.  
Key to lock the door  
When closing the door with the inside  
lock knob turned to “LOCK”  
The outside chime sounds for a few  
seconds and all the doors unlock.  
The Intelligent Key is inside the vehicle or  
Carry the Intelligent Key with you.  
luggage room.  
The Intelligent Key is inside the vehicle or  
Carry the Intelligent Key with you.  
luggage room.  
When pushing the door handle request The outside chime sounds for a few  
A door is not closed securely.  
Close the door securely.  
switch to lock the door  
seconds.  
The door handle request switch is  
pushed before the door is closed.  
Push the door handle request switch after  
the door is closed.  
The Intelligent Key system warning light  
in the meter blinks in green.  
Replace the battery with a new one. (See  
“Battery” (P.8-15).)  
The battery charge is low.  
When pushing the ignition switch to start  
the engine  
The Intelligent Key system warning light  
in the meter blinks in yellow and the  
inside warning chime sounds for a few  
seconds.  
The Intelligent Key is not in the vehicle. Carry the Intelligent Key with you.  
Pre-driving checks and adjustments 3-11  
Symptom  
Possible cause  
Action to take  
It warns of a malfunction with the  
electrical steering lock system (if  
equipped) or the Intelligent Key system.  
The Intelligent Key system warning light  
in the meter illuminates in yellow.  
Contact a NISSAN dealer.  
When pushing the ignition switch  
USING REMOTE KEYLESS ENTRY FUNC-  
TION  
Operating range  
Unlocking doors  
When you first receive the vehicle, the door unlock  
mode is set to unlock all the doors with one push of the  
It is possible to lock/unlock all doors including the back  
door using the remote keyless entry system. The  
operating distance depends upon the conditions  
around the vehicle. To securely operate the lock and  
unlock buttons, approach the vehicle to about 1 m (3.3  
ft) from the door.  
2
“UNLOCK” button  
switched to the selective door unlock mode (if  
equipped).  
. The door unlock mode can be  
*
All door unlock mode:  
The remote keyless entry system will not function under  
the following conditions:  
2
*
1. Push the “UNLOCK” button  
Key.  
on the Intelligent  
.
When the Intelligent Key is not within the  
operational range.  
2. All doors (including the back door) will be  
unlocked.  
.
When the Intelligent Key battery is discharged.  
SPA2252  
Selective door unlock mode (if equipped):  
For information regarding the replacement of a battery,  
see “Battery” (P.8-15).  
Type A (with panic alarm)  
2
1. Push the “UNLOCK” button  
Key.  
on the Intelligent  
*
Locking doors  
2. The driver’s door will be unlocked.  
1. Place the ignition switch in the “OFF” position and  
carry the Intelligent Key.  
2
*
3. Push the “UNLOCK” button  
Key again.  
on the Intelligent  
2. Close all doors (including the back door).  
4. All doors (including the back door) will be  
unlocked.  
1
3. Push the “LOCK” button  
Key.  
on the Intelligent  
*
Switching door unlock mode (if equipped):  
4. All doors will be locked.  
To switch the door unlock mode from one to another,  
5. Operate the door handles to confirm that the  
doors have been securely locked.  
push the “LOCK”  
on the key simultaneously for more than 4 seconds.  
and “UNLOCK”  
buttons  
SPA2045  
Type B (without panic alarm)  
1
LOCK button  
*
.
.
When the selective door unlock mode is set, the  
hazard indicator flashes 3 times.  
CAUTION:  
2
UNLOCK button  
*
3
PANIC button  
When the all door unlock mode is set, the hazard  
indicator flashes once.  
*
After locking the doors using the Intelligent Key,  
be sure that the doors have been securely  
locked by operating the door handles.  
3-12 Pre-driving checks and adjustments  
Automatic relock:  
Hazard indicator and horn mode  
Except for Korea:  
All doors will be locked automatically unless one of the  
following operations is performed within 30 seconds  
after pushing the “UNLOCK” button on the Intelligent  
Key while the doors are locked. If during this 30-  
second time period, the “UNLOCK”  
Intelligent Key is pushed, all doors will be locked  
automatically after another 30 seconds.  
Operation  
DOOR LOCK  
HAZARD - once  
DOOR UNLOCK  
HAZARD - twice  
Intelligent Key system (using door  
handle or back door request  
switch)  
button on the  
OUTSIDE CHIME - once  
OUTSIDE CHIME - twice  
HAZARD - twice  
HORN - twice  
Remote keyless entry system  
HAZARD - once  
HORN - once  
.
.
Opening any door or back door.  
Pushing the ignition switch.  
(using  
or  
button)  
For Korea:  
Using panic alarm (if equipped)  
Operation  
DOOR LOCK  
DOOR UNLOCK  
If you are near your vehicle and feel threatened, you  
may activate the alarm to call attention as follows:  
Intelligent Key system (using door  
handle or back door request  
switch)  
HAZARD - twice  
OUTSIDE CHIME - twice  
HAZARD - once  
OUTSIDE CHIME - once  
3
*
1. Push the “PANIC”  
button  
on the  
Intelligent Key for more than 1 second.  
HAZARD - once  
HORN - none  
Remote keyless entry system  
HAZARD - twice  
HORN - once  
2. The theft warning alarm and headlights will stay on  
for 25 seconds.  
(using  
or  
button)  
3. The panic alarm stops when:  
Hazard indicator mode (for Korea)  
.
.
It has run for 25 seconds, or  
Operation  
DOOR LOCK  
DOOR UNLOCK  
Any of the buttons on the Intelligent Key is pushed.  
(Note: the PANIC button should be pushed for  
more than 1 second.)  
Intelligent Key system (using door  
handle or back door request  
switch)  
HAZARD - twice  
OUTSIDE CHIME - none  
HAZARD - none  
OUTSIDE CHIME - none  
HAZARD INDICATOR AND HORN OPERA-  
TION  
When you lock or unlock the doors or the back door  
with the request switch or the remote keyless entry  
function, the hazard indicator will flash and the horn or  
the outside chime will sound as a confirmation.  
HAZARD - none  
HORN - none  
Remote keyless entry system  
HAZARD - twice  
HORN - none  
(using  
or  
button)  
The following descriptions show how the hazard  
indicator and outside chime will activate when locking  
or unlocking the doors or back door.  
Pre-driving checks and adjustments 3-13  
SECURITY SYSTEM  
Your vehicle has either or both of the following security  
systems:  
4. Close all doors, hood and back door. Lock all  
doors. The doors can be locked with the Intelligent  
Key, door handle request switch, power door lock  
switch or mechanical key.  
Switching procedure (for Korea)  
To switch the hazard indicator and horn (chime)  
.
.
Theft warning (if equipped)  
1
operation, push the “LOCK”  
and “UNLOCK”  
*
2
buttons on the Intelligent Key simultaneously  
NISSAN Anti-theft System (NATS)*  
*
5. Confirm that the security indicator light comes on.  
The security indicator light stays on for about 30  
seconds. The vehicle security system is now pre-  
armed. After about 30 seconds the vehicle  
security system automatically shifts into the armed  
phase. The security light begins to flash once  
every approximately 3 seconds. If, during this 30-  
second pre-arm time period, the door is unlocked,  
or the ignition switch is pushed to “ACC” or “ON”,  
the system will not arm.  
for more than 2 seconds.  
The security condition will be shown by the security  
indicator light.  
.
When the hazard indicator mode is set, the hazard  
indicator flashes 3 times.  
(* immobilizer)  
.
When the hazard indicator and horn mode are set,  
the hazard indicator flashes once and the horn  
chirps once.  
THEFT WARNING SYSTEM (if equipped)  
The theft warning system provides visual and audio  
alarm signals if parts of the vehicle are disturbed.  
Security indicator light  
Even when the driver and/or passengers are in  
the vehicle, the system will activate with all  
doors, hood, and back door locked with the  
ignition switch in the “LOCK” position. When  
pushing the ignition switch to the “ACC” or “ON”  
position, the system will be released.  
Theft warning system operation:  
The vehicle security system will give the following  
alarm:  
SIC2045  
.
The hazard indicator blinks and the horn sounds  
intermittently for approximately 30 seconds.  
The security indicator light, located on the meter panel,  
operates whenever the ignition switch is in the  
“LOCK”, “OFF” or “ACC” position. This is normal.  
.
The alarm automatically turns off after approxi-  
mately 30 seconds. However, the alarm reacti-  
vates if the vehicle is tampered with again.  
How to activate system:  
The alarm is activated by:  
1. Close all windows.  
.
Unlocking the door or opening the back door  
without using the button on the Intelligent Key, the  
door handle request switch or the mechanical key.  
(Even if the door is opened by releasing the door  
inside lock knob, the alarm will activate.)  
The system can be armed even if the  
windows are open.  
2. Place the ignition switch in the “OFF” position.  
3. Remove the Intelligent Key from the vehicle.  
3-14 Pre-driving checks and adjustments  
HOOD  
.
Opening the hood (if equipped).  
Security indicator light  
WARNING:  
How to stop alarm:  
.
.
The hood must be closed and latched  
securely before driving. Failure to do so  
could cause the hood to fly open and result  
in an accident.  
.
.
The alarm will stop only by unlocking a door by  
pushing the “UNLOCK” button on the remote  
controller or Intelligent Key (if equipped).  
The alarm will not stop if the ignition switch is  
placed in the “ACC” or “ON” position.  
Never open the hood if steam or smoke is  
coming from the engine compartment to  
avoid injury.  
NISSAN ANTI-THEFT SYSTEM (NATS)  
The NISSAN Anti-Theft System (NATS) will not allow  
the engine to start without the use of the registered  
NATS key.  
SIC2045  
If the engine does not start using the registered NATS  
key, it may be due to interference caused by:  
The security indicator light is located on the meter  
panel. It indicates the status of NATS.  
.
.
.
.
Another NATS key.  
The light operates whenever the ignition switch is in  
the “LOCK”, “OFF” or “ACC” position. The security  
indicator light indicates that the security systems on  
the vehicle are operational.  
Automated toll road device.  
Automated payment device.  
Other devices that transmit similar signals.  
Start the engine using the following procedure:  
If NATS is malfunctioning, this light will remain on while  
the ignition switch is in the “ON” position.  
1. Remove any items that may be causing the  
interference away from the NATS key.  
If the light remains on and/or the engine does  
not start, contact a NISSAN dealer for NATS  
service as soon as possible. Be sure to bring all  
NATS keys that you have when visiting a NISSAN  
dealer for service.  
2. Leave the ignition switch in the “ON” position for  
approximately 5 seconds.  
3. Place the ignition switch in the “OFF” or “LOCK”  
position, and wait approximately 10 seconds.  
4. Repeat steps 2 and 3 again.  
5. Start the engine.  
6. Repeat the steps above until all possible inter-  
ferences are eliminated.  
If this procedure allows the engine to start, NISSAN  
recommends placing the registered NATS key sepa-  
rate from other devices to avoid interference.  
Pre-driving checks and adjustments 3-15  
BACK DOOR  
OPENING HOOD  
WARNING:  
Make sure the back door has been closed  
securely to prevent it from opening while  
driving.  
.
.
Do not drive with the back door open. This  
could allow dangerous exhaust gases to be  
drawn into the vehicle.  
JVP0338X  
1
1. Pull the hood lock release handle  
located  
*
below the instrument panel until the hood springs  
up.  
2
2. Locate the lever  
in between the hood and  
*
grille and pull the lever up with your fingertips.  
3
3. Raise the hood  
.
*
JVP0339X  
4
4. Remove the support rod  
and insert it into the  
*
To open the back door, unlock it and push the back  
5
slot  
.
*
A
door opener switch  
open.  
. Pull up the back door to  
*
A
Hold the coated parts  
when removing or  
*
resetting the support rod. Avoid direct contact  
with the metal parts, as they may be hot  
immediately after the engine has been stopped.  
The back door can be unlocked by:  
.
Push the back door request switch (if equipped).  
(See “Intelligent Key system” (P.3-6).)  
CLOSING HOOD  
1. While supporting the hood, return the support rod  
to its original position.  
.
Push the “UNLOCK” button on the Intelligent Key  
(if equipped). (See “Intelligent Key system” (P.3-  
6).)  
2. Slowly lower the hood to about 20 to 30 cm (8 to  
12 in) above the hood lock, then let it drop.  
.
.
Push the “UNLOCK” button on the remote  
controller (if equipped). (See “Remote keyless  
entry system” (P.3-5).)  
3. Make sure it is securely latched.  
Push the power door lock switch to the “UN-  
LOCK” position.  
3-16 Pre-driving checks and adjustments  
FUEL FILLER LID  
BACK DOOR RELEASE LEVER  
FUEL FILLER CAP  
WARNING:  
.
Fuel is extremely flammable and highly  
explosive under certain conditions. You  
could be burned or seriously injured if it is  
misused or mishandled. Always stop the  
engine and do not smoke or allow open  
flames or sparks near the vehicle when  
refueling.  
.
.
Fuel may be under pressure. Turn the cap a  
half of a turn, and wait for any “hissing”  
sound to stop to prevent fuel from spraying  
out and possibly causing personal injury.  
Then remove the cap.  
SPA2392  
SPA2800  
If the back door cannot be unlocked due to  
discharged battery, follow these steps.  
a
Except for Korea: The fuel filler cap is a ratcheting type.  
1
Turn the cap counterclockwise  
to remove. Tighten  
until ratchet clicks, more than  
*
Use only an original equipment type fuel  
filler cap as a replacement. It has a built-in  
safety valve needed for proper operation of  
the fuel system and emission control sys-  
tem. An incorrect cap can result in a serious  
malfunction and possible injury.  
2
*
the cap clockwise  
1. Remove the cover inside of the back door with a  
suitable tool.  
twice, after refueling.  
1
For Korea: Turn the cap counterclockwise  
to  
*
A
*
2. Move the lever toward the direction  
illustrated to open the back door.  
as  
2
*
remove. To tighten, turn the cap clockwise  
single click is heard.  
until a  
Contact a NISSAN dealer as soon as possible for  
repair.  
A
*
Put the fuel filler cap on the cap holder  
refueling.  
while  
OPENING FUEL FILLER LID  
CAUTION:  
If fuel is spilled on the vehicle body, flush it away  
with water to avoid paint damage.  
SPA2336  
To open the fuel filler lid, pull the fuel filler lid release  
handle.  
Pre-driving checks and adjustments 3-17  
STEERING WHEEL  
MIRRORS  
1
Push the lock lever down  
and adjust the steering  
*
WARNING:  
WARNING:  
2
wheel up or down  
to the desired position.  
*
Never adjust the steering wheel while driving so  
that full attention may be given to vehicle  
operation.  
Adjust the position of all mirrors before driving.  
Do not adjust the mirror positions while driving  
so that full attention may be given to vehicle  
operation.  
3
Pull the lock lever up  
wheel in place.  
securely to lock the steering  
*
Except for Mexico and Korea  
INSIDE REARVIEW MIRROR  
While holding the inside rearview mirror, adjust the  
mirror angles until the desired position is achieved.  
SPA1527  
1
While pulling the lock lever up  
, adjust the steering  
*
2
wheel up or down  
achieved.  
until the desired position is  
*
SPA2143  
3
*
Push the lock lever down  
wheel in place.  
firmly to lock the steering  
1
Pull the adjusting lever  
when the glare from the  
*
headlights of the vehicle behind you obstructs your  
vision at night.  
For Mexico and Korea  
2
*
Push the adjusting lever  
rearward visibility.  
during the day for the best  
SPA2808  
3-18 Pre-driving checks and adjustments  
be sure to adjust them again electrically  
before driving.  
OUTSIDE REARVIEW MIRRORS  
Folding  
Remote control type (if equipped):  
WARNING:  
Automatic folding function with interlocking  
door lock (if equipped):  
.
.
Never touch the outside rearview mirrors  
while they are in motion. Doing so may pinch  
your fingers or damage the mirror.  
Never drive the vehicle with the outside  
rearview mirrors folded. This reduces rear  
view visibility and may lead to an accident.  
.
.
Objects viewed in the outside mirror are  
closer than they appear (if equipped).  
The picture dimensions and distance in the  
outside mirrors are not real.  
SPA1732A  
The outside rearview mirror remote control operates  
when the ignition switch is in the “ACC” or “ON”  
position.  
JVC0025X  
Adjusting  
The outside rearview mirrors fold automatically by  
interlocking door lock. The function can be used while  
The outside rearview mirrors automatically fold when  
2
the switch is in the “AUTO” position  
.
*
the outside rearview mirror folding switch is pushed to  
1
*
the “CLOSE” position  
. To unfold, push to the  
.
.
.
The outside rearview mirrors fold automatically  
when the door is locked by the door handle  
request switch or the remote keyless entry system.  
2
“OPEN” position  
.
*
CAUTION:  
The outside rearview mirrors do not fold auto-  
matically when the switch is in the intermediate  
position.  
.
.
Continuously performing the fold/unfold  
operation of the outside rearview mirror  
may cause the switch to stop the operation.  
The outside rearview mirrors unfold when the  
ignition switch is placed in the “ACC” or “ON”  
position.  
SPA2214  
Do not touch the mirrors while they are  
moving. Your hand may be pinched, and the  
mirror may malfunction.  
The outside rearview mirror remote control operates  
when the ignition switch is in the “ACC” or “ON”  
position.  
WARNING:  
.
.
Do not drive with the mirrors stored. You will  
be unable to see behind the vehicle.  
1
1. Move the switch to select the right (R)  
or left  
.
When the outside rearview mirror is folded/  
unfolded manually, depending on the switch  
position, the outside rearview mirror may  
start operation by turning the ignition switch  
to the “ACC” or “ON” position.  
*
2
(L)  
mirror.  
*
If the mirrors were folded or unfolded by  
hand, there is a chance that the mirror will  
move forward or backward during driving. If  
the mirrors were folded or unfolded by hand,  
2. Adjust each mirror by pushing the switch until the  
3
*
desired position is achieved  
.
Pre-driving checks and adjustments 3-19  
PARKING BRAKE  
.
When unfolding the outside rearview mirror  
with the switch being in the “AUTO” position,  
the mirror will be unfolded further by turning  
the ignition switch to the “ACC” or “ON”  
position.  
Manual control type:  
WARNING:  
.
.
Never drive the vehicle with the parking  
brake applied. The brake will overheat and  
fail to operate and will lead to an accident.  
Never release the parking brake from out-  
side the vehicle. If the vehicle moves, it will  
be impossible to push the foot brake pedal  
and will lead to an accident.  
To return its original position, fold the out-  
side rearview mirror once.  
The outside rearview mirror remote control operates  
when the ignition switch is in the “ACC” or “ON”  
position.  
.
.
Never use the shift lever in place of the  
parking brake. When parking, be sure the  
parking brake is fully applied.  
The outside rearview mirrors automatically fold when  
the outside rearview mirror folding switch is pushed to  
the “CLOSE” position  
“AUTO” position  
SPA1829  
Never leave children or adults who would  
normally require the support of others alone  
in your vehicle. They could unknowingly  
release the parking brake and inadvertently  
become involved in a serious accident.  
Fold the outside rearview mirror by pushing it toward  
the rear of the vehicle.  
1
*
. To unfold, push to the  
2
*
.
VANITY MIRROR (if equipped)  
CAUTION:  
.
.
Continuously performing the fold/unfold  
operation of the outside rearview mirror  
may cause the switch to stop the operation.  
Do not touch the mirrors while they are  
moving. Your hand may be pinched, and the  
mirror may malfunction.  
.
.
Do not drive with the mirrors stored. You will  
be unable to see behind the vehicle.  
If the mirrors were folded or unfolded by  
hand, there is a chance that the mirror will  
move forward or backward during driving. If  
the mirrors were folded or unfolded by hand,  
be sure to adjust them again electrically  
before driving.  
SPA1733  
SPA2110  
To use the front vanity mirror, pull down the sun visor  
and pull up the cover.  
To apply the parking brake, pull the parking brake lever  
1
*
up  
.
To release the parking brake, firmly depress and hold  
the foot brake pedal. Pull up the parking brake lever  
2
slightly, push the button  
and lower the lever  
*
3
completely  
.
*
Before driving, be sure that the brake warning light has  
3-20 Pre-driving checks and adjustments  
turned off.  
Pre-driving checks and adjustments 3-21  
MEMO  
3-22 Pre-driving checks and adjustments  

Related Topics

Keys Door locks Remote keyless entry system Intelligent Key system Security system Hood Back door Fuel filler lid Steering wheel Mirrors Parking brake

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot