be sure to adjust them again electrically
before driving.
OUTSIDE REARVIEW MIRRORS
Folding
Remote control type (if equipped):
WARNING:
Automatic folding function with interlocking
door lock (if equipped):
.
.
Never touch the outside rearview mirrors
while they are in motion. Doing so may pinch
your fingers or damage the mirror.
Never drive the vehicle with the outside
rearview mirrors folded. This reduces rear
view visibility and may lead to an accident.
.
.
Objects viewed in the outside mirror are
closer than they appear (if equipped).
The picture dimensions and distance in the
outside mirrors are not real.
SPA1732A
The outside rearview mirror remote control operates
when the ignition switch is in the “ACC” or “ON”
position.
JVC0025X
Adjusting
The outside rearview mirrors fold automatically by
interlocking door lock. The function can be used while
The outside rearview mirrors automatically fold when
2
the switch is in the “AUTO” position
.
*
the outside rearview mirror folding switch is pushed to
1
*
the “CLOSE” position
. To unfold, push to the
.
.
.
The outside rearview mirrors fold automatically
when the door is locked by the door handle
request switch or the remote keyless entry system.
2
“OPEN” position
.
*
CAUTION:
The outside rearview mirrors do not fold auto-
matically when the switch is in the intermediate
position.
.
.
Continuously performing the fold/unfold
operation of the outside rearview mirror
may cause the switch to stop the operation.
The outside rearview mirrors unfold when the
ignition switch is placed in the “ACC” or “ON”
position.
SPA2214
Do not touch the mirrors while they are
moving. Your hand may be pinched, and the
mirror may malfunction.
The outside rearview mirror remote control operates
when the ignition switch is in the “ACC” or “ON”
position.
WARNING:
.
.
Do not drive with the mirrors stored. You will
be unable to see behind the vehicle.
1
1. Move the switch to select the right (R)
or left
.
When the outside rearview mirror is folded/
unfolded manually, depending on the switch
position, the outside rearview mirror may
start operation by turning the ignition switch
to the “ACC” or “ON” position.
*
2
(L)
mirror.
*
If the mirrors were folded or unfolded by
hand, there is a chance that the mirror will
move forward or backward during driving. If
the mirrors were folded or unfolded by hand,
2. Adjust each mirror by pushing the switch until the
3
*
desired position is achieved
.
Pre-driving checks and adjustments 3-19
English 
