SECURITY SYSTEM
Your vehicle has either or both of the following security
systems:
4. Close all doors, hood and back door. Lock all
doors. The doors can be locked with the Intelligent
Key, door handle request switch, power door lock
switch or mechanical key.
Switching procedure (for Korea)
To switch the hazard indicator and horn (chime)
.
.
Theft warning (if equipped)
1
operation, push the “LOCK”
and “UNLOCK”
*
2
buttons on the Intelligent Key simultaneously
NISSAN Anti-theft System (NATS)*
*
5. Confirm that the security indicator light comes on.
The security indicator light stays on for about 30
seconds. The vehicle security system is now pre-
armed. After about 30 seconds the vehicle
security system automatically shifts into the armed
phase. The security light begins to flash once
every approximately 3 seconds. If, during this 30-
second pre-arm time period, the door is unlocked,
or the ignition switch is pushed to “ACC” or “ON”,
the system will not arm.
for more than 2 seconds.
The security condition will be shown by the security
indicator light.
.
When the hazard indicator mode is set, the hazard
indicator flashes 3 times.
(* immobilizer)
.
When the hazard indicator and horn mode are set,
the hazard indicator flashes once and the horn
chirps once.
THEFT WARNING SYSTEM (if equipped)
The theft warning system provides visual and audio
alarm signals if parts of the vehicle are disturbed.
Security indicator light
Even when the driver and/or passengers are in
the vehicle, the system will activate with all
doors, hood, and back door locked with the
ignition switch in the “LOCK” position. When
pushing the ignition switch to the “ACC” or “ON”
position, the system will be released.
Theft warning system operation:
The vehicle security system will give the following
alarm:
SIC2045
.
The hazard indicator blinks and the horn sounds
intermittently for approximately 30 seconds.
The security indicator light, located on the meter panel,
operates whenever the ignition switch is in the
“LOCK”, “OFF” or “ACC” position. This is normal.
.
The alarm automatically turns off after approxi-
mately 30 seconds. However, the alarm reacti-
vates if the vehicle is tampered with again.
How to activate system:
The alarm is activated by:
1. Close all windows.
.
Unlocking the door or opening the back door
without using the button on the Intelligent Key, the
door handle request switch or the mechanical key.
(Even if the door is opened by releasing the door
inside lock knob, the alarm will activate.)
The system can be armed even if the
windows are open.
2. Place the ignition switch in the “OFF” position.
3. Remove the Intelligent Key from the vehicle.
3-14 Pre-driving checks and adjustments
English 
