2010-2019 Nissan Juke SUV Pre-driving checks and adjustments -> Intelligent Key system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Pre-driving checks and adjustments -> Intelligent Key system for Your Nissan Juke SUV First Generation (2010-2019)

INTELLIGENT KEY SYSTEM (if  
equipped)  
Perform the same procedure to deactivate the  
selective door unlock mode.  
CAUTION:  
After locking the doors using the remote con-  
troller, be sure that the doors have been securely  
locked by operating the door handles.  
Battery indicator light  
The battery indicator light  
push any button. If the light does not illuminate, the  
battery is weak or needs replacement. For information  
regarding replacement of  
controller battery” (P.8-16).  
3
illuminates when you  
*
Unlocking doors  
a
battery, see “Remote  
1. Push the “UNLOCK”  
controller.  
button on the remote  
Hazard indicator operation  
2. All doors will be unlocked.  
SPA2406  
When you lock or unlock the doors, the hazard  
indicator will flash as a confirmation.  
All doors will be locked automatically unless one of the  
following operations is performed within 30 seconds  
Type A (with panic alarm)  
after pushing the “UNLOCK”  
button.  
.
.
“LOCK”: The hazard indicator flashes once.  
“UNLOCK”: The hazard indicator flashes twice.  
.
.
Opening any doors.  
Inserting the key into the ignition switch.  
Selecting door unlock mode (if equipped):  
When you first receive the vehicle, the door unlock  
mode is set to unlock all the doors with one push of the  
2
“UNLOCK”  
button  
. The door unlock mode  
*
can be switched to the selective door unlock mode,  
which unlocks the driver’s door at the second push of  
SPA2502  
2
*
the “UNLOCK”  
button  
.
Type B (without panic alarm)  
Intelligent Key (2)  
Selective door unlock mode:  
1.  
2.  
3.  
Mechanical key (inside the Intelligent Key) (2)  
Key number plate  
2
1. Push the “UNLOCK”  
remote controller.  
button  
button  
on the  
on the  
*
2. The driver’s door unlocks.  
WARNING:  
2
*
3. Push the “UNLOCK”  
remote controller again.  
.
Radio waves could adversely affect electric  
medical equipment. Those who use a pace-  
maker should contact the electric medical  
equipment manufacturer for the possible  
influences before use.  
4. All doors will be unlocked.  
To switch to the selective door unlock mode, perform  
the following procedure.  
Push the “LOCK”  
simultaneously for more than 4 seconds.  
and “UNLOCK”  
buttons  
.
The Intelligent Key transmits radio waves  
when the buttons are pushed. The radio  
3-6 Pre-driving checks and adjustments  
waves may affect aircraft navigation and  
communication systems. Do not operate the  
Intelligent Key while on an airplane. Make  
sure the buttons are not operated uninten-  
tionally when the unit is stored during a  
flight.  
.
.
When any type of radio wave remote control is  
used nearby.  
.
Do not strike the Intelligent Key sharply  
against another object.  
When the Intelligent Key is placed near an electric  
appliance such as a personal computer.  
.
.
Do not change or modify the Intelligent Key.  
Wetting may damage the Intelligent Key. If  
the Intelligent Key gets wet, immediately  
wipe until it is completely dry.  
In such cases, correct the operating conditions before  
using the Intelligent Key function or use the mechanical  
key.  
The Intelligent Key system can operate all the door  
(including the back door) locks using the remote  
controller function or pushing the request switch on  
the vehicle without taking the key out from a pocket or  
purse. The operating environment and/or conditions  
may affect the Intelligent Key system operation.  
.
.
If the outside temperature is below −108C  
(148F), the battery of the Intelligent Key may  
not function properly.  
Although the life of the battery varies depending on the  
operating conditions, the battery’s life is approximately  
2 years. If the battery is discharged, replace it with a  
new one.  
Do not place the Intelligent Key for an  
extended period in an area where tempera-  
tures exceed 608C (1408F).  
For information regarding replacement of a battery, see  
“Battery” (P.8-15).  
Be sure to read the following before using the  
Intelligent Key system.  
.
.
Do not attach the Intelligent Key with a key  
holder that contains a magnet.  
Since the Intelligent Key is continuously receiving radio  
waves, if the key is left near equipment which transmits  
strong radio waves, such as signals from a TV and  
personal computer, the battery life may become  
shorter.  
Do not place the Intelligent Key near equip-  
ment that produces a magnetic field, such as  
a TV, audio equipment and personal compu-  
ters.  
CAUTION:  
.
.
Be sure to carry the Intelligent Key with you  
when operating the vehicle.  
Because the steering wheel is locked electrically (if  
equipped), unlocking the steering wheel with the  
ignition switch in the “LOCK” position is impossible  
when the vehicle battery is completely discharged. Pay  
special attention that the vehicle battery is not  
completely discharged.  
Never leave the Intelligent Key in the vehicle  
when you leave the vehicle.  
If an Intelligent Key is lost or stolen, NISSAN  
recommends erasing the ID code of that Intelligent  
Key from the vehicle. This may prevent the unauthor-  
ized use of the Intelligent Key to operate the vehicle.  
For information regarding the erasing procedure,  
contact a NISSAN dealer.  
The Intelligent Key is always communicating with the  
vehicle as it receives radio waves. The Intelligent Key  
system transmits weak radio waves. Environmental  
conditions may interfere with the operation of the  
Intelligent Key system under the following operating  
conditions.  
As many as 4 Intelligent Keys can be used with one  
vehicle. For information about the purchase and use of  
additional Intelligent Keys, contact a NISSAN dealer.  
The Intelligent Key function can be disabled. For  
information about disabling the Intelligent Key function,  
contact a NISSAN dealer.  
.
When operating near a location where strong  
radio waves are transmitted, such as a TV tower,  
power station and broadcasting station.  
CAUTION:  
.
.
Do not allow the Intelligent Key, which  
contains electrical components, to come  
into contact with water or salt water. This  
could affect the system function.  
.
.
When in possession of wireless equipment, such  
as a cellular telephone, transceiver, and CB radio.  
When the Intelligent Key is in contact with or  
covered by metallic materials.  
Do not drop the Intelligent Key.  
Pre-driving checks and adjustments 3-7  
.
.
When the Intelligent Key is left inside the vehicle  
OPERATING RANGE  
When the Intelligent Key is not within the  
operational range  
.
.
.
When any door is open or not closed securely  
When the Intelligent Key battery is discharged  
When the ignition switch is in the “ACC” or “ON”  
position  
SPA2074  
handle or rear bumper the request switches may not  
function.  
When the Intelligent Key is within the operating range,  
it is possible for anyone, even someone who does not  
carry the Intelligent Key, to push the request switch  
and lock/unlock the doors.  
SPA2407  
.
Do not push the door handle request switch with  
the Intelligent Key held in your hand as illustrated.  
The close distance to the door handle will cause  
the Intelligent Key system to have difficulty  
recognizing that the Intelligent Key is outside the  
vehicle.  
USING INTELLIGENT KEY SYSTEM  
SPA2075  
The Intelligent Key functions can only be used when  
the Intelligent Key is within the specified operating  
.
.
After locking the doors using the door handle  
request switch, make sure that the doors have  
been securely locked by operating the door  
handles.  
1
*
range from the request switch  
.
When the Intelligent Key battery is discharged or  
strong radio waves are present near the operating  
location, the Intelligent Key system’s operating range  
becomes narrower, and the Intelligent Key may not  
function properly.  
When locking the doors using the door handle  
request switch, make sure to have the Intelligent  
Key in your possession before operating the door  
handle request switch to prevent the Intelligent  
Key from being left in the vehicle.  
SPA2408  
The request switch will not function under the following  
conditions:  
The operating range is within 80 cm (31.50 in) from  
.
The door handle request switch is operational only  
when the Intelligent Key has been detected by the  
Intelligent Key system.  
1
each request switch  
.
*
If the Intelligent Key is too close to the door glass,  
3-8 Pre-driving checks and adjustments  
.
Do not pull the door handle before pushing the  
door handle request switch. The door will be  
unlocked but will not open. Release the door  
handle once and pull it again to open the door.  
.
.
.
When the Intelligent Key is placed inside of  
the glove box.  
Locking doors  
1. Push the ignition switch to the “OFF” position.  
When the Intelligent Key is placed inside of  
the door pockets.  
2. Carry the Intelligent Key with you.  
3. Close all doors.  
When the Intelligent Key is placed inside or  
near metallic materials.  
A
*
4. Push the door handle request switch  
(driver’s  
or front passenger’s) or the back door request  
The lockout protection may function when the  
Intelligent Key is outside the vehicle but is too  
close to the vehicle.  
B
switch  
.
*
5. All doors and the back door will be locked.  
6. Operate door handles to confirm that the doors  
have been securely locked.  
Unlocking doors  
Lockout protection:  
Switching door unlock mode (if equipped):  
To prevent the Intelligent Key from being accidentally  
locked in the vehicle, lockout protection is equipped  
with the Intelligent Key system.  
To switch the door unlock mode from one to another,  
see “Using remote keyless entry function” (P.3-12).  
SPA2710  
Selective door unlock mode (if equipped):  
.
When the Intelligent Key is left in the vehicle and  
you try to lock the door using the driver’s inside  
lock knob after getting out of the vehicle, all the  
doors will unlock automatically and a chime will  
sound after the door is closed.  
1. Carry the Intelligent Key with you.  
A
2. Push the door handle request switch  
or the  
*
B
back door request switch  
.
*
3. Driver’s door handle or back door request switch:  
Only the corresponding door will be unlocked.  
Front passenger’s door handle request switch:  
.
When the Intelligent Key is left in the vehicle while  
the driver’s door is opened and you try to lock the  
door using the power door lock switch after  
getting out of the vehicle, an inside warning chime  
will sound after the power door lock switch or the  
driver’s inside lock knob is operated.  
All doors (including the back door) will be  
unlocked. (Selective door unlock mode is not  
available.)  
SPA2545  
4. Push the door handle request switch again within  
5 seconds.  
When you carry the Intelligent Key with you, you can  
lock or unlock all doors by pushing the door handle  
CAUTION:  
A
request switch (driver’s or front passenger’s)  
or  
*
5. All doors will be unlocked.  
The lockout protection may not function under  
the following conditions:  
B
back door request switch  
operation.  
within the range of  
*
6. Operate the door handles to open the doors.  
.
When the Intelligent Key is placed on top of  
the instrument panel.  
When you lock or unlock the doors or open the back  
door, the hazard indicator will flash and the outside  
chime will sound as a confirmation. For details, see  
“Hazard indicator and horn operation” (P.3-13).  
.
When the Intelligent Key is placed on the  
cargo cover (if equipped).  
Pre-driving checks and adjustments 3-9  
All door unlock mode:  
BATTERY SAVER SYSTEM  
1. Carry the Intelligent Key with you.  
When all the following conditions are met for a period  
of time, the battery saver system will cut off the power  
supply to prevent battery discharge.  
A
*
2. Push the door handle request switch  
or back  
B
door request switch  
.
*
.
.
.
The ignition switch is in the “ACC” position, and  
All doors are closed, and  
3. All doors and the back door will be unlocked.  
If a door handle is pulled while unlocking the doors,  
that door may not be unlocked. Returning the door  
handle to its original position will unlock the door. If the  
door does not unlock, after returning the door handle,  
push the door handle request switch to unlock the  
door.  
The shift lever is in the “P” (Park) position.  
(Continuously Variable Transmission models)  
WARNING AND AUDIBLE REMINDERS  
The Intelligent Key system is equipped with a function  
that is designed to minimize improper operations of the  
Intelligent Key and to help prevent the vehicle from  
being stolen. A chime or beep sounds inside and  
outside the vehicle and a warning light illuminates or  
blinks.  
All doors will be locked automatically unless one of the  
following operations is performed within 1 minute or 30  
seconds after pushing the request switch while the  
doors are locked.  
.
.
Opening any doors.  
See the troubleshooting guide on the next page and  
“Warning/indicator lights and audible reminders” (P.2-  
11).  
Pushing the ignition switch.  
If during the preset time period the “UNLOCK”  
button on the Intelligent Key is pushed, all doors will be  
locked automatically after the next preset time.  
Intelligent Key system warning light:  
P position selecting warning light:  
OPENING BACK DOOR  
CAUTION:  
1. Carry the Intelligent Key.  
c
2. Push the back door opener switch  
.
*
When the chime or beep sounds or the warning  
light illuminates or blinks, be sure to check both  
the vehicle and the Intelligent Key.  
3. All doors and the back door will be unlocked.  
4. Open the back door.  
3-10 Pre-driving checks and adjustments  
TROUBLESHOOTING GUIDE  
Symptom  
The P position selecting warning light in  
Possible cause  
Action to take  
the meter illuminates and the inside  
warning chime sounds continuously or  
for a few seconds. (Continuously Variable  
Transmission models)  
When pushing the ignition switch to stop  
the engine  
The shift lever is not in the “P” (Park)  
position.  
Shift the shift lever to the “P” (Park)  
position.  
The inside warning chime sounds con-  
tinuously. (Continuously Variable Trans-  
mission models)  
When shifting the shift lever to the P  
(Park) position  
The ignition switch is in the “ACC” or  
“ON” position.  
Push the ignition switch to the “OFF”  
position.  
When opening the driver’s door to get  
out of the vehicle  
The inside warning chime sounds con- The ignition switch is in the “ACC”  
Push the ignition switch to the “OFF”  
position.  
tinuously.  
position.  
The Intelligent Key system warning light  
in the meter blinks in yellow, the outside The ignition switch is in the “ACC” or  
Push the ignition switch to the “OFF”  
position.  
chime sounds 3 times and the inside  
warning chime sounds for a few seconds.  
“ON” position.  
When closing the door after getting out  
of the vehicle  
The P position selecting warning light in  
the meter illuminates and the outside  
chime sounds continuously. (Continu-  
ously Variable Transmission models)  
The ignition switch is in the “ACC” or  
“OFF” position and the shift lever is not in position and push the ignition switch to  
the “P” (Park) position. the “OFF” position.  
Move the shift lever to the “P” (Park)  
When pushing the request switch or the  
The outside chime sounds for a few  
seconds and all the doors unlock.  
“LOCK”  
button on the Intelligent  
The Intelligent Key is inside the vehicle. Carry the Intelligent Key with you.  
Key to lock the door  
When closing the door with the inside  
lock knob turned to “LOCK”  
The outside chime sounds for a few  
seconds and all the doors unlock.  
The Intelligent Key is inside the vehicle or  
Carry the Intelligent Key with you.  
luggage room.  
The Intelligent Key is inside the vehicle or  
Carry the Intelligent Key with you.  
luggage room.  
When pushing the door handle request The outside chime sounds for a few  
A door is not closed securely.  
Close the door securely.  
switch to lock the door  
seconds.  
The door handle request switch is  
pushed before the door is closed.  
Push the door handle request switch after  
the door is closed.  
The Intelligent Key system warning light  
in the meter blinks in green.  
Replace the battery with a new one. (See  
“Battery” (P.8-15).)  
The battery charge is low.  
When pushing the ignition switch to start  
the engine  
The Intelligent Key system warning light  
in the meter blinks in yellow and the  
inside warning chime sounds for a few  
seconds.  
The Intelligent Key is not in the vehicle. Carry the Intelligent Key with you.  
Pre-driving checks and adjustments 3-11  
Symptom  
Possible cause  
Action to take  
It warns of a malfunction with the  
electrical steering lock system (if  
equipped) or the Intelligent Key system.  
The Intelligent Key system warning light  
in the meter illuminates in yellow.  
Contact a NISSAN dealer.  
When pushing the ignition switch  
USING REMOTE KEYLESS ENTRY FUNC-  
TION  
Operating range  
Unlocking doors  
When you first receive the vehicle, the door unlock  
mode is set to unlock all the doors with one push of the  
It is possible to lock/unlock all doors including the back  
door using the remote keyless entry system. The  
operating distance depends upon the conditions  
around the vehicle. To securely operate the lock and  
unlock buttons, approach the vehicle to about 1 m (3.3  
ft) from the door.  
2
“UNLOCK” button  
switched to the selective door unlock mode (if  
equipped).  
. The door unlock mode can be  
*
All door unlock mode:  
The remote keyless entry system will not function under  
the following conditions:  
2
*
1. Push the “UNLOCK” button  
Key.  
on the Intelligent  
.
When the Intelligent Key is not within the  
operational range.  
2. All doors (including the back door) will be  
unlocked.  
.
When the Intelligent Key battery is discharged.  
SPA2252  
Selective door unlock mode (if equipped):  
For information regarding the replacement of a battery,  
see “Battery” (P.8-15).  
Type A (with panic alarm)  
2
1. Push the “UNLOCK” button  
Key.  
on the Intelligent  
*
Locking doors  
2. The driver’s door will be unlocked.  
1. Place the ignition switch in the “OFF” position and  
carry the Intelligent Key.  
2
*
3. Push the “UNLOCK” button  
Key again.  
on the Intelligent  
2. Close all doors (including the back door).  
4. All doors (including the back door) will be  
unlocked.  
1
3. Push the “LOCK” button  
Key.  
on the Intelligent  
*
Switching door unlock mode (if equipped):  
4. All doors will be locked.  
To switch the door unlock mode from one to another,  
5. Operate the door handles to confirm that the  
doors have been securely locked.  
push the “LOCK”  
on the key simultaneously for more than 4 seconds.  
and “UNLOCK”  
buttons  
SPA2045  
Type B (without panic alarm)  
1
LOCK button  
*
.
.
When the selective door unlock mode is set, the  
hazard indicator flashes 3 times.  
CAUTION:  
2
UNLOCK button  
*
3
PANIC button  
When the all door unlock mode is set, the hazard  
indicator flashes once.  
*
After locking the doors using the Intelligent Key,  
be sure that the doors have been securely  
locked by operating the door handles.  
3-12 Pre-driving checks and adjustments  
Automatic relock:  
Hazard indicator and horn mode  
Except for Korea:  
All doors will be locked automatically unless one of the  
following operations is performed within 30 seconds  
after pushing the “UNLOCK” button on the Intelligent  
Key while the doors are locked. If during this 30-  
second time period, the “UNLOCK”  
Intelligent Key is pushed, all doors will be locked  
automatically after another 30 seconds.  
Operation  
DOOR LOCK  
HAZARD - once  
DOOR UNLOCK  
HAZARD - twice  
Intelligent Key system (using door  
handle or back door request  
switch)  
button on the  
OUTSIDE CHIME - once  
OUTSIDE CHIME - twice  
HAZARD - twice  
HORN - twice  
Remote keyless entry system  
HAZARD - once  
HORN - once  
.
.
Opening any door or back door.  
Pushing the ignition switch.  
(using  
or  
button)  
For Korea:  
Using panic alarm (if equipped)  
Operation  
DOOR LOCK  
DOOR UNLOCK  
If you are near your vehicle and feel threatened, you  
may activate the alarm to call attention as follows:  
Intelligent Key system (using door  
handle or back door request  
switch)  
HAZARD - twice  
OUTSIDE CHIME - twice  
HAZARD - once  
OUTSIDE CHIME - once  
3
*
1. Push the “PANIC”  
button  
on the  
Intelligent Key for more than 1 second.  
HAZARD - once  
HORN - none  
Remote keyless entry system  
HAZARD - twice  
HORN - once  
2. The theft warning alarm and headlights will stay on  
for 25 seconds.  
(using  
or  
button)  
3. The panic alarm stops when:  
Hazard indicator mode (for Korea)  
.
.
It has run for 25 seconds, or  
Operation  
DOOR LOCK  
DOOR UNLOCK  
Any of the buttons on the Intelligent Key is pushed.  
(Note: the PANIC button should be pushed for  
more than 1 second.)  
Intelligent Key system (using door  
handle or back door request  
switch)  
HAZARD - twice  
OUTSIDE CHIME - none  
HAZARD - none  
OUTSIDE CHIME - none  
HAZARD INDICATOR AND HORN OPERA-  
TION  
When you lock or unlock the doors or the back door  
with the request switch or the remote keyless entry  
function, the hazard indicator will flash and the horn or  
the outside chime will sound as a confirmation.  
HAZARD - none  
HORN - none  
Remote keyless entry system  
HAZARD - twice  
HORN - none  
(using  
or  
button)  
The following descriptions show how the hazard  
indicator and outside chime will activate when locking  
or unlocking the doors or back door.  
Pre-driving checks and adjustments 3-13  
SECURITY SYSTEM  
Your vehicle has either or both of the following security  
systems:  
4. Close all doors, hood and back door. Lock all  
doors. The doors can be locked with the Intelligent  
Key, door handle request switch, power door lock  
switch or mechanical key.  
Switching procedure (for Korea)  
To switch the hazard indicator and horn (chime)  
.
.
Theft warning (if equipped)  
1
operation, push the “LOCK”  
and “UNLOCK”  
*
2
buttons on the Intelligent Key simultaneously  
NISSAN Anti-theft System (NATS)*  
*
5. Confirm that the security indicator light comes on.  
The security indicator light stays on for about 30  
seconds. The vehicle security system is now pre-  
armed. After about 30 seconds the vehicle  
security system automatically shifts into the armed  
phase. The security light begins to flash once  
every approximately 3 seconds. If, during this 30-  
second pre-arm time period, the door is unlocked,  
or the ignition switch is pushed to “ACC” or “ON”,  
the system will not arm.  
for more than 2 seconds.  
The security condition will be shown by the security  
indicator light.  
.
When the hazard indicator mode is set, the hazard  
indicator flashes 3 times.  
(* immobilizer)  
.
When the hazard indicator and horn mode are set,  
the hazard indicator flashes once and the horn  
chirps once.  
THEFT WARNING SYSTEM (if equipped)  
The theft warning system provides visual and audio  
alarm signals if parts of the vehicle are disturbed.  
Security indicator light  
Even when the driver and/or passengers are in  
the vehicle, the system will activate with all  
doors, hood, and back door locked with the  
ignition switch in the “LOCK” position. When  
pushing the ignition switch to the “ACC” or “ON”  
position, the system will be released.  
Theft warning system operation:  
The vehicle security system will give the following  
alarm:  
SIC2045  
.
The hazard indicator blinks and the horn sounds  
intermittently for approximately 30 seconds.  
The security indicator light, located on the meter panel,  
operates whenever the ignition switch is in the  
“LOCK”, “OFF” or “ACC” position. This is normal.  
.
The alarm automatically turns off after approxi-  
mately 30 seconds. However, the alarm reacti-  
vates if the vehicle is tampered with again.  
How to activate system:  
The alarm is activated by:  
1. Close all windows.  
.
Unlocking the door or opening the back door  
without using the button on the Intelligent Key, the  
door handle request switch or the mechanical key.  
(Even if the door is opened by releasing the door  
inside lock knob, the alarm will activate.)  
The system can be armed even if the  
windows are open.  
2. Place the ignition switch in the “OFF” position.  
3. Remove the Intelligent Key from the vehicle.  
3-14 Pre-driving checks and adjustments  

Related Topics

Pre-driving checks and adjustments
Keys Door locks Remote keyless entry system Security system Hood Back door Fuel filler lid Steering wheel Mirrors Parking brake

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot