2004-2009 Nissan Micra 4 Door Instruments and controls -> Headlight and turn signal switch User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Headlight and turn signal switch for Your Nissan Micra 4 Door Third Generation (2004-2009)

GUID-5BB37F91-9258-47C0-9D55-FD4DE381D22F
HEADLIGHT SWITCH
GUID-67D0CDD9-159 2-47E5-818B-E5FF1DB95730
SIC3782
Type A
SIC3783
Type B
NISSAN recommends that you consult the local
regulations concerning the use of lights.
AUTO position (if equipped)
GUID-22F12490-0A3E-471B-888C-3008BDED2039
When the ignition switch is in the “ON” position and
the headlight switch is in the “AUTO” position, the
headlights, front clearance lights, instrument panel
lights, rear combination light, and other lights turn on
automatically depending on the brightness of the
surroundings.
The headlights will turn on automatically at twilight or in
rainy weather (when the windshield wiper is operated
continuously) (for Hong Kong).
When the ignition switch is turned to the “OFF”
position, the lights will turn off automatically.
JVI0023X
CAUTION:
Do not place any objects on top of the sensor
*
A
. The sensor senses the brightness level and
controls the autolight function. If the sensor is
covered, it r eacts as if it is dark, and the
headlights will illuminate.
position
GUID-A0D18317-0495-40D8-A9FA-EE2499F411D0
The position turns on the front clearance lights,
instrument panel lights, rear combination lights and
other lights.
position
GUID-4BF8CF8B-68B7-42A6-B422-1626246880E6
The position turns on the headlights in addition to
the other lights.
Headlight beam
GUID-6D7A45E5-10CC-4D7B-A440-6285E4E6E276
SIC3785
To turn on the high beam, push the lever towards the
front position
*
1
.
To turn off the high beam, return the lever to the neutral
position
*
2
.
To flash the headlights, pull the lever towards the
rearmost position
*
3
. The headlights can be flashed
even when the headlights are not on.
Instruments and controls 2-33
HEADLIGHT AND TURN SIGNAL
SWITCH
2-34 Instruments and controls
If equipped, when the lever is pulled towards the
rearmost p o s i tion
*
3
after the ignition switch is
placed in the “OFF” or “LOCK” position, the headlight
will turn on and stay on for 30 seconds. The lever can
be pulled 4 times for up to 2 minutes.
Daytime light system (if equipped)
GUID-7B0C9DCA-8BED-4EF1-B639-2EE198F7C26A
Even if the headlight switch is off, the daytime lights
will come on after starting the engine. However, you
cannot change low beam to high beam when the light
switch is off.
When the light switch is turned to the
position,
the headlight low beam will turn off.
BATTERY SAVER SYSTEM
GUID-E752AA94-699E-48C0-B079-8F35CBAEDA85
The light reminder chime will sound if the driver’s door
is opened while the following improper operations
occur:
. The headlight switch is in either the
or
position, and the ignition switch in the “ACC”,
“OFF” or “LOCK” position.
. The headlight switch is in the “AUTO” position and
the front or rear fog light (if equipped) is turned on
while the ignition switch is in the “ACC”, “OFF” or
“LOCK” position.
Be sure to turn the headlight switch to the “OFF”
position when you leave the vehicle.
Type A
When the headlight switch is in the
or
position while the engine is running, the lights will
automatically turn off after pushing the ignition switch
to the “ACC”, “OFF” or “LOCK” position and opening
the driver’s side door.
When the headlight switch remains in either the
or position after the lights automatically turn off,
the lights will turn on when the engine is started.
Type B
If the doors are closed and locked with the remote
controller, the Intelligent Key or the door request
switch (if equipped) while the headlight switch is in
either the
or position, the battery saver
function will turn off the lights to prevent the battery
from being discharged. The lights will turn on when the
doors are being opened.
CAUTION:
Do not leave the lights on when the engine is not
running for extended periods of time to prevent
the battery from being discharged.
HEADLIGHT AIMING CONTROL (if
equipped)
GUID-296812EE-5594-4EEF-8AAB-8F7621ED7AA4
Manual type
GUID-9F8AA76B-756F-4978-A84C-8355B5128B81
SIC2275
The headlight aiming con trol opera tes when the
ignition switch is in the “ON” position and the headlight
is on to allow the headlight axis to be adjusted
according to the driving condition.
When driving with no heavy load/luggage or driving on
a flat road, select the normal position “0”.
If the number of occupants and load/luggage in the
vehicle changes, the headlight axis may become higher
than normal.
If the vehicle is traveling on a hilly road, the headlights
may directly shine on the rearview and outside mirrors
of a vehicle ahead or the windshield of an oncoming
vehicle, which may obscure other drivers’ vision.
To adjust to the proper aiming height, turn the switch
accordingly. The higher the number, designated on the
switch, the lower the headlight axis.
Select the switch position by referring to the following
samples.
Switch po-
sition
Number of
front seat
occupants
Number of
rear seat
occupants
Weight of load in lug-
gage compartment
0 1 or 2
No occu-
pants
No load
1 2 3 No load
2 2 3
Approximately 48 kg
(106 lb)
Approximately 70 kg
(154 lb)*2
Approximately 42 kg
(93 lb)*1
Approximately 73 kg
(161 lb)*2
3 1
No occu-
pants
Approximately 279 kg
(615 lb)
Approximately 292 kg
(644 lb)*1
Approximately 306 kg
(675 lb)*2
*1: For the Middle East
*2: For Hong Kong
TURN SIGNAL SWITCH
GUID-A48819B7-4D37-40F2-84CC-68816DA64498
SIC3786
CAUTION:
The turn signal switch will not be cancelled
automatically if the steering wheel turning angle
does not exceed the preset amount. After the
turn or lane change, make sure that the turn
signal switch is returned to its original position.
Turn signal
GUID-F319319F-8F92-42FD-B933-C776FB771C44
To turn on the turn signals, move the lever up
*
1
or
down
*
2
towards the desired direction. When the
turn is completed, the turn signal cancels automati-
cally.
Lane change signal
GUID-03C00EDE-3231-4420-91F3-C675D9AA06A3
To turn on the lane change signals, move the lever up
*
1
or down
*
2
towards the desired direction.
If the lever is moved back right after moving up
*
1
or
down
*
2
, the light will flash 3 times (if equipped).
To cancel the flashing, move the lever to the opposite
direction.
Instruments and controls 2-35

Related Topics

Popular Owner Manuals