
GUID-96BB62AC-2200-4B36-9FD3-B3B7EC7AA12D
This warning appears in either of the following
conditions.
No key inside the vehicle:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The warning appears when the door is closed with the
Intelligent Key left outside the vehicle and the ignition
switch in the “ACC” or “ON” position. Make sure that
the Intelligent Key is inside the vehicle.
Unregistered Intelligent Key:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The warning appears when the ignition switch is
pushed from the “LOCK” position and the Intelligent
Key cannot be recognized by the system. You cannot
start the engine with an unregistered key. Use the
registered Intelligent Key.
For more details, see “Intelligent Key system” (P.3-9).
4. SHIFT “P” warning (AT/CVT model)
GUID-F2057362-B229-4E3B-B2A4-56F3E1C0FF6E
This warning appears when the ignition switch is
pushed to stop the engine with the shift lever in any
position except the “P” (Park) position.
If this warning appears, move the shift lever to the “P”
(Park) position or push the ignition switch to the “ON”
position.
An inside warnin g chime will also sound. (See
“Intelligent Key system” (P.3-9).)
5. “PUSH” warning (AT/CVT model)
GUID-C1DE98FC-BE65-4558-B11F-A89EDBAF5667
This warning appears when the shift lever is moved to
the “P” (Park) position with the ignition switch in the
“ACC” position after the SHIFT “P” warning appears.
To push the ignition switch to the “OFF” position,
perform the following procedure:
SHIFT “P” warning ? (Move the shift lever to “P”) ?
PUSH warning ? (Push the ignition switch ?
ignition switch position is turned to “ON”) ? PUSH
warning ? (Push the ignition switch ? ignition
switch position is turned to “OFF”)
6. Intelligent Key battery discharge indicator
GUID-1A42D478-7517-4D42-AFF2-9888B51ACA72
This indicator appears when the Intelligent Key battery
is running out of power.
If this indicator appears, replace the battery with a new
one. (See “Battery” (P.8-24).)
7. Engine start operation indicator (Manual
Transmission models)
GUID-6AC7F331-F824-46F5-A199-734DA6CFE5B2
This indicator means that the engine will start by
pushing the ignition switch with the clutch pedal
depressed.
8. Cruise control indicator (for Europe)
GUID-B27B418D-C60A-4C90-89BC-6B5EA722BFA1
The cruise main switch indicator (CRUISE) is dis-
played when the cruise control main switch is pushed.
When the main switch is pushed again, the CRUISE
indicator disappears. When the CRUISE indicator is
displayed, the cruise control system is operational.
The cruise control set indicator (SET) is displayed
while the vehicle speed is controlled by the cruise
control system. If the SET indicator blinks while the
engine is running, it may indicate that the cruise control
system is not functioning properly. Have the system
checked by a NISSAN dealer.
For more details, see “Cruise control” (P.5-30).
9. Speed limiter indicator (for Europe)
GUID-8156F950-E362-4FAD-A932-7E690F0F4EC5
The speed limiter main switch indicator (LIMIT) is
displayed when the speed limiter main switch is
pushed. When the main switch is pushed again, the
LIMIT indicator disappears.
The speed limiter set indicator (SET) is displayed while
the speed limiter is activated.
For more details, see “Speed limiter (if equipped for
Europe)” (P.5-28).
10. Mechanical Key LOCK warning (if
equipped for Europe)
GUID-D36B4AFD-5F04 -486C-8987-4C96573508C7
The warning appears when the ignition switch is left in
the “ACC” or “OFF” position instead of completely
being turned to the “LOCK” position.
If this warning appears, turn the ignition switch to the
“LOCK” position.
When the ignition switch is in the “ON” position, a
buzzer will sound twice and the Mechanical Key LOCK
warning shows when the ignition switch is turned to
the “ACC” or “OFF” position. This is to warn the driver
that the ignition switch is not in the “LOCK” position.
Make sure the shift lever is in the “P” (Park) position
(for CVT model) or the shift lever is in the “N” (Neutral)
position (for MT model) and then turn the ignition
switch to the “LOCK” position.
CAUTION:
. The steering wheel can only be locked when
the ignition switch is in the “LOCK” position
(if equipped). Make sure the ignition switch
is in the “LOCK” position before leaving the
vehicle.
. The mechanical key can only be removed at
the “LOCK” position. Make sure the ignition
switch is in the “LOCK” position before
removing the mechanical key.
For further details, see “Ignition switch (model without
intelligent Key system)” (P.5-5).
Instruments and controls 2-21