2004-2009 Nissan Micra 4 Door Monitor, Heater and air conditioner, and audio system User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Monitor, Heater and air conditioner, and audio system for Your Nissan Micra 4 Door Third Generation (2004-2009)

4 Monitor, Heater and air conditioner, and audio
system
Safety precautions
....
................................................................................... 4-2
Rearview monitor (if equipped)
....
............................................................ 4-2
How to read displayed lines
....
.......................................................... 4-2
Difference between predictive and actual distances
....
............... 4-3
Mirror display operation
....
................................................................... 4-4
Operating tips
....
.................................................................................. 4-4
Ventilators
....
.................................................................................................. 4-5
Side ventilators
....
.................................................................................. 4-5
Center ventilators
....
.............................................................................. 4-5
Heater and air conditioner (if equipped)
....
........................................... 4-6
Operating tips (for automatic air conditioner)
....
........................... 4-6
Manual air conditioner
....
..................................................................... 4-7
Automatic air conditioner
....
................................................................ 4-9
Servicing air conditioner
....
.............................................................. 4-10
Audio system (if equipped)
....
................................................................ 4-11
Audio operation precautions
....
....................................................... 4-11
Antenna (if equipped)
....
................................................................... 4-19
FM-AM radio with Compact Disc (CD) player (Type A)
....
.... 4-20
FM-AM radio with Compact Disc (CD) player (Type B)
....
.... 4-24
FM-AM radio with Compact Disc (CD) player (Type C)
....
.... 4-29
FM-AM radio with Compact Disc (CD) player (Type D)
....
.... 4-33
FM-AM radio with Compact Disc (CD) player (Type E)
....
.... 4-38
FM-AM radio with Compact Disc (CD) player (Type F)
....
.... 4-44
LW-MW-FM radio with compact disc (CD) player
....
............ 4-52
LW-MW-FM radio with compact disc (CD) changer
....
........ 4-57
FM-AM radio with Compact Disc (CD) player and
navigation (if equipped)
....
............................................................. 4-62
Steering wheel switch for audio control (if equipped)
....
..... 4-63
CD/USB memory care and cleaning
....
...................................... 4-63
Car phone or CB radio
....
...................................................................... 4-64
Bluetooth
®
Hands-Free Phone System (if equipped for model
without navigation system)
....
................................................................ 4-64
Regulatory information
....
................................................................ 4-65
CE statement
....
................................................................................ 4-65
Hands-Free Phone System (Type A)
....
..................................... 4-65
Hands-Free Phone System (Type B)
....
..................................... 4-71
4-2 Monitor, Heater and air conditioner, and audio system
GUID-7AE370BF-999D-4876-9D22-6D4228886738
WARNING:
. Do not adjust the heater and air conditioner
controls or audio controls while driving so
that full attention may be given to vehicle
operation.
. If you noticed any foreign objects entering
the system hardware, spilled liquid on the
system, or noticed smoke or fumes coming
out from the system, or any other unusual
operation is observed, stop using the system
immediately and contact the nearest
NISSAN dealer. Ignoring such conditions
may lead to an accident, fire or electric
shock.
. Do not disassemble or modify this system. If
you do, it may lead to an accident, fire, or
electric shock.
CAUTION:
Do not use the system when the engine is not
running for extended periods of time to prevent
battery discharge.
GUID-CC106B2E-5E79-4 2F8-99ED-0E1DA694C54F
When the shift lever is shifted into the “R” (Reverse)
position, the monitor display shows a rearward view
from the vehicle.
The system is designed as an aid to the driver in
situations such as slot parking or parallel parking.
Designs and items displayed on the screen may vary
depending on the models.
WARNING:
. The rearview monitor is a convenience but it
is not a substitute to check behind the
vehicle when backing up. T he driver is
always responsible for safety during parking
and other manoeuvres.
. Objects viewed in the rearview mo nitor
differ from actual distance because a wide-
angle lens is used. Objects in the rearview
monitor will appear visually opposite than
when viewed in the in side and outside
rearview mirrors.
. Make sure that the back door is securely
closed when backing up.
. Undern eath the bumper and the corner
areas of the bumper cannot be viewed on
the rearview monitor because of its mon-
itoring range limitation.
. Do not put anything on the rearview camera.
The rearview camera is installed above the
license plate.
. When washing the vehicle with high-pres-
sure water, be sure not to spray it around the
camera. Otherwise, water may enter the
camera unit causing water condensation on
the lens, a malfunction, fire or an electric
shock.
. Do not strike the camera. It is a precision
instrument. Otherwise, it may malfunction or
cau se dam age resulting in a fire or an
electric shock.
CAUTION:
Do not scratch the camera lens when cleaning
dirt or snow from the lens.
HOW TO READ DISPLAYED LINES
GUID-22FC5EF2-EDAB-4FB9-BAFF-4419FCFDAA54
SAA2776
Guide lines which indicate the vehicle width and
distances to objects with reference to the bumper line
*
A
are displayed on the monitor.
Distance guide lines:
Indicate distances from the vehicle body.
. Red line
*
1
: approx. 0.5 m (1.5 ft)
. Yellow line
*
2
: approx. 1 m (3 ft)
. Green line
*
3
: approx. 2 m (7 ft)
. Green line
*
4
: approx. 3 m (10 ft)
Vehicle width guide lines
*
5
:
Indicate the vehicle width when backing up.
SAFETY PRECAUTIONS REARVIEW MONITOR (if equipped)
DIFFERENCE BETWEEN PREDICTIVE AND
ACTUAL DISTANCES
GUID-153C5CCE-162B-4DA9-B3AE-660211DD5D1F
Backing up on a steep uphill
GUID-0392F0C9-7651-4856-B34B-662144B0FAF4
JVH0521X
When backing up the vehicle up a hill, the distance
guide lines and the vehicle width guide lines are shown
closer than the actual distance. For example, the
display shows 1 m (3 ft) to the place
*
A
, but the
actual 1 m (3 ft) distance on the hill is the place
*
B
.
Note that any object on the hill is viewed in the monitor
further than it appears.
Backing up on a steep downhill
GUID-92619D00-D1C0-47EF-A5A7-D3E5AFE953C4
JVH0522X
When backing up the vehicle down a hill, the distance
guide lines and the vehicle width guide lines are shown
further than the actual distance. For example, the
display shows 1 m (3 ft) to the place
*
A
, but the
actual 1 m (3 ft) distance on the hill is the place
*
B
.
Note that any object on the hill is viewed in the monitor
closer than it appears.
Backing up near a projecting object
GUID-7C76FA4A-2F94-47F8-A2F4-2F44E245F542
SAA3440
The vehicle may seem to nearly clear the object in the
display. However, the vehicle may hit the object if it
projects over the actual backing up course.
Monitor, Heater and air conditioner, and audio system 4-3
4-4 Monitor, Heater and air conditioner, and audio system
Backing up behind a projecting object
GUID-A5D2128B-7D88-4CF6-8FC1-15B8CA729DA8
JVH0523X
The position
*
C
is shown further than the position
*
B
in the display. However, the position
*
C
is actually at
the same distance as the position
*
A
. The vehicle
may hit the object when backing up to the position
*
A
if the object projects over the actual backing up
course.
MIRROR DISPLAY OPERATION
GUID-AF482621-1924-4560-804D-C01890516316
SAA3341
Rearview monitor on/off
GUID-DF911563-A6AE-4CF8-B1C7-82918B712666
The rearview monitor
*
C
is displayed automatically
when the shift lever is moved to the “R” (Reverse)
position.
To turn off the rearview monitor
*
C
, push the POWER
ON/OFF button
*
A
. The indicator light
*
B
will
illuminate in orange.
To return to the display the rearview monitor
*
C
, push
the POWER ON/OFF button
*
A
again or turn the
ignition switch to the “OFF” position. The indicator light
*
B
will illuminate in green.
To set the rearview monitor to be always not displayed,
push and hold the POWER ON/OFF button
*
A
for
12 seconds or more when the shift lever is in the “R”
(Reverse) position. The indicator light
*
B
turns off and
then turns back on in approximately 2 seconds.
Whenever the rearview monitor is off, by switching the
ignition switch to the “ON” position and then pressing
the POWER ON/OFF button
*
A
while the shift lever
is in the “R” (Reverse) position, the rearview monitor
will be displayed again on the mirror display.
Language select mode
GUID-46C14C4F-0D35-49B6-A80E-4C226EDC5806
To change the language of the warning text displayed
on the mirror display, push and hold the POWER ON/
OFF button
*
A
for 6 to 11 seconds when the shift
lever is in the “R” (Reverse) position. When the
language select screen is displayed push the POWER
ON/OFF button
*
A
repeatedly until the preferred
language is displayed.
If the button is not pushed for approximately 5
seconds, the language select mode will auto-
matically return to the normal mode.
OPERATING TIPS
GUID-0948ED57-AAA2-4673-B51F-E223BE3C9B9E
. When the view is switched, the display images on
the screen may be displayed with some delay.
. When the temperature is extremely high or low,
the screen may not clearly display objects. This is
not a malfunction.
. When strong light is directly coming on the
camera, objects may not be displayed clearly.
This is not a malfunction.
. Vertical lines may be seen in objects on the
screen. This is due to strong reflected light from
the bumper. This is not a malfunction.
. The screen may flicker under fluorescent light. This
is not a malfunction.
. The colors of objects on the rearview monitor may
differ somewhat from the actual color of objects.
This is not a malfunction.
. Objects on the monitor may not be clear in a dark
environment. This is not a malfunction.
. If dirt, rain or snow accumulates on the camera,
the rearview monitor may not display objects
clearly. Clean the camera.
. Do not use alcohol, benzine or thinner to clean the
camera. This will cause discoloration. To clean the
camera, wipe with a cloth dampened with diluted
mild cleaning agent and then wipe with a dry cloth.
. Do not damage the camera as the monitor screen
may be adversely affected.
. Do not use wax on the camera window. Wipe off
any wax with a clean cloth dampened with mild
detergent diluted with water.
. While the shift lever is in the “R” (Reverse)
position, the automatic anti-glare function is not
operated.
GUID-ED511BD4-6EFF-4D1A-B12F-A6879FABC44D
SIDE VENTILATORS
GUID-7F24F3B8-1D C0-4F9A-88D8-6D77502FF95D
SAA3126
Adjust the air flow direction of the ventilators by
opening, closing or rotating.
The side ventilators can be used for the side defogger.
CENTER VENTILATORS
GUID-9331AEAD-EC42-4D11-9218-662CB099EF5E
Square type
GUID-35BC0F02-E5F4 -4C20-B043-41D9DFB4AD28
JVH0018X
Open/close the ventilators by moving the control
*
1
in either direction.
: This symbol indicates that the ventilators are
closed. Moving the side control in this
direction will close the ventilators.
: This symbol indicates that the ventilators are
open. Moving the side control in this
direction will open the ventilators.
Adjust the air flow direction of the ventilators by moving
the center knob
*
2
(up/down/left/right ) until the
preferred position is achieved.
Monitor, Heater and air conditioner, and audio system 4-5
VENTILATORS
4-6 Monitor, Heater and air conditioner, and audio system
Circle type
GUID-8676C787-D33 1-4BCD-B930-CCCED884CE0E
SAA3126
Adjust the air flow direction of the ventilators by
opening, closing or rotating.
GUID-32171670-7746-42F3-A876-35BA3870933B
WARNING:
. The heater and air conditioner operate only
when the engine is running.
. Never leave children or adults who would
normally require the support of others alone
in the vehicle. Pets should not be left alone
either. They could unkno wingly activat e
switches or controls and inadvertently be-
come involved in a serious accident and
injure themselves. On hot, s unn y days,
tem peratures in a closed vehicle could
quickly become high enough to cause se-
vere or possibly fatal injuries to people or
animals.
. Do not use the recirculation mode for long
periods as it may cause the interior air to
become stale and the windows to fog up.
. Do not adjust the heating and air condition-
ing controls while driving so that full atten-
tion may be given to vehicle operation.
The heater and air conditioner operate when the
engine is running. The air blower will operate when the
ignition switch is in the “ON” position even if the
engine is turned off.
For model with Stop/Start System (if equipped
for Europe) or Idling Stop System (for Hong
Kong):
The Stop/Start System or Idling Stop System will not
stop the engine under the following conditions:
. The front defogger mode is on. (automatic air
conditioner)
. The air flow control dial is in the front defogger
position. (manual air conditioner)
. The rear window defogger mode is on.
While the engine is stopped by the Stop/Start System
or Idling Stop System, taking one of the following
actions will automatically start the engine:
. Turn the front defogger mode on. (automatic air
conditioner)
. Turn the air flow control dial to the front defogger
position. (manual air conditioner for Europe)
. The air flow control dial is in the front defogger
position and the fan speed control dial is on.
(manual air conditioner for Hong Kong)
. Turn the rear window defogger mode on.
When the engine is stopped by the Stop/Start System
or Idling Stop System, performance of the heater and
air conditioner may be reduced to minimize the fuel
consumption. For the best heating and air conditioning
performance, restart the engine by pushing the Stop/
Start System or Idling Stop System OFF switch. (See
“Stop/Start System OFF switch” (P.5-23) or “Idling
Stop OFF switch” (P.5-21).)
OPERATING TIPS (for automatic air condi-
tioner)
GUID-D0A8C178-DC0D-4568-983C-AEE197F69A10
JVH0349X
HEATER AND AIR CONDITIONER (if
equipped)
JVH0549X
Left-Hand Drive (LHD) model*
When the engine coolant temperature and outside air
temperature are low, the air flow from the foot outlets
may not operate. However, this is not a malfunction.
After the coolant temperature warms up, the air flow
from the foot outlets will operate normally.
The sensors
*
A
and
*
B
, located on the instrument
panel, help maintain a constant temperature. Do not
put anything on or around the sensors.
*: The illustration is for the Left-Hand Drive (LHD)
model. For the Right-Hand Drive (RHD) model, the
layout will be the opposite.
MANUAL AIR CONDITIONER
GUID-87DCBB8E-C762-4125-8CCF-6F24851A7047
JVH0545X
1. Rear window defogger switch (if equipped) (See
“Defogger switch” (P.2-39).)
2. Fan speed control “
” dial
3. “A/C” (Air Conditioner) button (if equipped)
4. Air flow control dial
5. Temperature control dial
6. Air intake lever (Outside air circulation “
”
/Air recirculation “
”)
To turn off the heater and air conditioner, turn the fan
speed control “
” dial to the “OFF” (0) position.
Controls
GUID-350631D1-842B-4058-A57A-CF9C03EE21DB
Outside air circulation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Move the air intake lever to the “ ” position. The air
flow is drawn from outside the vehicle.
Air recirculation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Move the air intake lever to the “ ” position. The air
flow is circulated inside the vehicle.
Air flow control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Turn the air flow control dial to change the air flow
mode.
— Air flows from the center and side
ventilators.
— Air flows from the center and side
ventilators and foot outlets.
— Air flows mainly from the foot outlets.
— Air flows from the defogger and foot
outlets.
— Air flows mainly from the defogger outlets.
Fan speed control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Turn the fan speed control “ ” dial clockwise to
increase the fan speed.
Turn the fan speed control “
” dial counterclock-
wise to decrease the fan speed.
Monitor, Heater and air conditioner, and audio system 4-7
4-8 Monitor, Heater and air conditioner, and audio system
Temperature control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Turn the temperature control dial to set the desired
temperature. Turn the dial between the middle and the
right position to select the hot temperature. Turn the
dial between the middle and the left position to select
the cool temperature.
Heater operation
GUID-C1FA73F7-91C1-457B-9DDF-C2A78509BAE2
Heating:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode is used to direct heated air to the foot
outlets.
1. Move the air intake lever to the “
” position for
normal heating.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
Ventilation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode directs outside air to the side and center
ventilators.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position.
Defrosting or defogging:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode directs the air to the defogger outlets to
defrost/defog the windows.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
5. Turn the side ventilators to the side windows to
defrost or defog for a clear view to the side
mirrors.
. To remove frost from the outside surface of the
windshield quickly, turn the temperature control
dial to the maximum hot position and the fan
speed control “
” dial to the maximum position.
. If it is difficult to defog the windshield, turn the
“A/C” button (if equipped) on.
Bi-level heating:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode directs cool air from the side and center
vents and warm air from the foot outlets. When the
temperature control dial is turned to the maximum hot
or cool position, the air between the ventilators and the
foot outlets is the same temperature.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position.
Heating and defogging:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode heats the interior and defogs the windows.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the maximum
hot (right) position.
5. Turn the side ventilators to the side windows to
defrost or defog for a clear view to the side
mirrors.
Air conditioner operation (if equipped)
GUID-D1F2A228-5D79-4DCC-9F91-CDD4640B76CF
The air conditioner system should be operated for
approximately 10 minutes at least once a month. This
helps prevent damage to the air conditioner system
due to the lack of lubrication.
Cooling:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode is used to cool and dehumidify the air.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Push the “A/C” button on. (The “A/C” indicator
light will illuminate.)
5. Turn the temperature control dial to the desired
position between the middle and the cool (left)
position.
. For quick cooling when the outside temperature is
high, move the air intake lever to the “
”
position. Be sure to move the air intake lever to the
“
” position for normal cooling.
. A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air is
cooled rapidly. This does not indicate a malfunc-
tion.
Dehumidified heating:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode is used to heat and dehumidify the air.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Push the “A/C” button on. (The “A/C” indicator
light will illuminate.)
5. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
Dehumidified defogging:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode is used to defog the windows and
dehumidify the air.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Push the “A/C” button on. (The “A/C” indicator
light will illuminate.)
5. Turn the temperature control dial to the desired
position.
6. Turn the side ventilators to the side windows to
defrost or defog the side mirrors.
AUTOMATIC AIR CONDITIONER
GUID-B3AA77E7-D921-4611-ACF8-63E1BEECFFDA
SAA2592
1. Front defogger “
” button
2. Display
3. Rear windo w defogg er “
” button (See
“Defogger switch” (P.2-39).)
4. “AUTO” button
5. Temperature control “
”/“ ” buttons
6. Fan speed control “
+” and “ -”buttons
7. “OFF” button
8. “MODE” (air flow control) button
9. Air recirculation “
” button
10. Outside air circulation “
” button
11. “A/C” (Air Conditioner) button
Automatic operation (AUTO)
GUID-8705A708-CB0A-4DB8-95A2-9E5BB932D63F
The AUTO mode may be used year-round as the
system automatically controls constant temperature, air
flow distribution and fan speed after the desired
temperature is set manually.
To turn off the heater and air conditioner, push the
“OFF” button.
Cooling and dehumidified heating:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. Push the “AUTO” button. (“AUTO” will appear on
the display.)
2. If the “A/C” indicator light does not illuminate,
push the “A/C” button. (The “A/C” indicator light
will illuminate.)
3. Push the temperature control “
”/“ ” but-
ton to set the desired temperature.
4. If the indicator light on either the outside air
circulation “
” button or the air recirculation
“
” button is illuminated, push and hold the
button with the light illuminated to switch to the
automatic air intake control mode.
A visible mist may be seen coming from the ventilators
in hot, humid conditions as the air is cooled rapidly.
This does not indicate a malfunction.
Heating (A/C off):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. Push the “AUTO” button. (“AUTO” will appear on
the display.)
2. If the “A/C” indicator light illuminates, push the
“A/C” button. (The “A/C” indicator light will turn
off.)
Monitor, Heater and air conditioner, and audio system 4-9
4-10 Monitor, Heater and air conditioner, and audio system
3. Push the temperature control “
”/“ ” but-
ton to set the desired temperature.
. Do not set the temperature lower than the outside
air temperature. Doing so may cause the tem-
perature to not be controlled properly.
. If the windows fog up, use dehumidified heating
instead of the A/C off heating.
Dehumidified defrosting/defogging:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. Push the front defogger “ ” button. (The
“
” indicator light will illuminate.)
2. Push the temperature control “
”/“ ” but-
ton to set the desired temperature.
. To remove frost from the outside surface of the
windshield quickly, set the temperature to a high
temperature and the fan speed to the maximum
level.
. After the windshield is cleared, push the front
defogger “
” button again. (The indicator light
will turn off.)
. When the front defogger “
” button is pushed,
the air conditioner will automatically turn on when
the outside air temperature is above −28C (288F)
to defog the windshield. The air recirculation mode
will automatically turn off. The outside air circula-
tion mode “
” will be selected to improve the
defogging performance.
Manual operation
GUID-F044F738-8179-434A-B42F-6361C0461921
The manual mode can be used to control the heater
and air conditioner to your desired settings. (“MAN-
UAL” will appear on the display.)
To turn off the heater and air conditioner, push the
“OFF” button.
Fan speed control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the fan speed control “ ”/“ ” button. Push
the “
” button to increase the fan speed. Push the
“
” button to decrease the fan speed.
Push the “AUTO” button to change the fan speed to
the automatic mode.
Air flow control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the “MODE” button to change the air flow mode.
— Air flows from the center and side ventila-
tors.
— Air flows from the center and side ventila-
tors and foot outlets.
— Air flows mainly from the foot outlets
— Air flows from the defogger outlets and foot
outlets.
Temperature control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the temperature control “ ”/“ ” button to
set the desired temperature. Push the “
” button to
increase the temperature. Push the “
” button to
decrease the temperature.
Outside air circulation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the outside air circulation “ ” button to draw
the air flow from outside the vehicle. (The “
”
indicator light will illuminate.)
Air recirculation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the air recirculation “ ” button to circulate the
air flow inside the vehicle. (The “
” indicator light
will illuminate.)
Automatic air intake control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
If the indicator light on either the outside air circulation
“
” button or the air recirculation “ ” button is
illuminated, push and hold the button with the light
illuminated. (The indicator light will blink twice.) The
automatic air intake control mode is set.
SERVICING AIR CONDITIONER
GUID-EBA0C1E2-F64F-4D2D-98EA-1528B041DF19
WARNING:
The air conditioner system contains refrigerant
under high pressure. To avoid personal injury,
any air conditioner service should be done only
by an experienced technician with the proper
equipment.
The air conditioner system in your vehicle is charged
with a refrigerant designed with the environment in
mind.
This refrigerant will not harm the earth’s ozone
layer. However, it may contribute in a small part to
global warming.
Special charging equipment and lubricant are required
when servicing your vehicle’s air conditioner. Using
improper refrigerants or lubricants will cause severe
damage to the air conditioner system. (See “Air
conditioner system refrigerant and lubricant” (P.9-5).)
A NISSAN dealer will be able to service your
environmentally friendly air conditioner system.
Air conditioner filter (if equipped)
GUID-54721F9E-94E1-4415-942D-E40E02F5EFE3
The air conditioner system is equipped with an air
conditioner filter which collects pollen. To make sure
the air conditioner heat s defogs, and ventilates
efficiently, replace the filter according the specified
maintenance intervals listed in a separate maintenance
booklet. To replace the filter, contact a NISSAN dealer.
The filter should be replaced if the air flow decreases
significantly or if windows fog up easily when operating
the heater or air conditioner.
GUID-121E5959-8B59-469A-A2B2-CEC8C9953337
AUDIO OPERATION PRECAUTIONS
GUID-FE28C7B7-A9FC-4E4E-8C0E-BFC08D6010D8
WARNING:
Do not adjust the audio system while driving so
that full attention may be given to vehicle
operation.
Radio
GUID-5802243A-184 F-45A1-84DE-A4B8AC50C97F
. Radio reception is affected by station signal
strength, distance from radio transmitter, build-
ings, bridges, mountains an d other exter nal
influences. In termittent cha nges in reception
quality normally are caused by these external
influences.
. Using a cellular phone in or near the vehicle may
influence radio reception quality.
Compact Disc (CD) player
GUID-68F3B02B-1FFC-4137-8E67-8B218FA1314A
. During cold weather or rainy days, the player may
malfunction due to the humidity. If this occurs,
remove the CD from CD player and dehumidify or
ventilate the player completely.
. The player may skip while driving on rough roads.
. The CD player sometimes may not function when
the passenger compartment temperature is ex-
tremely high. Lower the temperature before use.
. Do not expose the CD to direct sunlight.
. CDs t hat are of p oor quality, or are dirty,
scratched, covered with fingerprints, or that have
pin holes may not work properly.
. The following CDs may not work properly.
— Copy control compact discs (CCCD)
— Recordable compact discs (CD-R)
— Rewritable compact discs (CD-RW)
SAA0480
. Do not use the following CDs as they may cause
the CD player to malfunction.
— 8 cm (3.1 in) discs (except for FM-AM Radio
with Compact Disc Player (Type B))
— CDs that are not round
— CDs with a paper label
— CDs that are warped, scratched or have
unusual edges.
— CD lens cleaner discs
. This audio system can only play prerecorded CDs.
It has no capabilities to record or burn CDs.
Monitor, Heater and air conditioner, and audio system 4-11
AUDIO SYSTEM (if equipped)
4-12 Monitor, Heater and air conditioner, and audio system
. If the CD cannot be played, one of the following
messages will be displayed.
Check disc/CHK CD/CD ERROR Check Disk:
. Confirm that the CD is inserted correctly (the label
side is facing up, etc.).
. Confirm that the CD is not bent or warped and it is
free of scratches.
. Confirm that the disc is a CD and not a DVD.
. Confirm that the disc contains audio files.
Push eject/Eject CD/CD Ejecting...:
This is a malfunction due to the temperature inside the
player is too high. Remove the CD by pushing the
EJECT button, and after a short time reinsert the CD.
The CD can be played when the temperature of the
player returns to normal.
Unplayable (model with type A, B, C audio unit):
The file is unplayable in this audio system (only MP3 or
WMA CD).
USB (Universal Serial Bus) (if equipped)
GUID-5962C464-893B-4736-9FD6-1FBC2FF2C655
WARNING:
Do not connect or disconnect the USB device
while driving. Doing so can be a distraction. If
distracted you could lose control of your vehicle
and cause an accident or serious injury.
CAUTION:
. Do not force the USB device into the USB
port. Inserting the USB device tilted or up-
side-down into the port may damage the
USB device and the port. Make sure that the
USB device is connected correctly into the
USB port.
. Do not grab the USB port cover (if equipped)
when pulling the USB device out of the port.
This could damage the port and the cover.
. Do not leave the USB cable in a place where
it can be pulled unintentionally. Pulling the
cable may break the wire, USB device or the
port.
. To avoid damage and loss of function when
using a USB device, note the following
precautions.
— Do not bend the cable excessively (40
mm (1.6 in) radius minimum).
— Do not twist the cable excessively (more
than 180 degrees).
— Do not pull or drop the cable.
— Do not hit or press the USB port or USB
device with hands, feet, or objects.
— Do not store objects with sharp edges in
the storage area where the cable i s
stored.
— Do not leave the USB device and
attached devices in the vehicle compart-
ment. When not in use for extended
periods of time, store the cable and USB
device in a clean, dust free environment
at room temperature and without direct
sun exposure.
— Do not use the cable for any other
purposes than its intended use in the
vehicle.
The vehicle is not equipped with a USB device. USB
devices should be purchased separately as necessary.
This system cannot be used to format USB devices. To
format a USB device, use a personal computer.
In some states/area, the USB device for the front seats
plays only sound without images for regulatory
reasons, even when the vehicle is parked.
This system supports various USB memory devices,
USB hard drives and iPod players (if equipped). Some
USB devices may not be supported by this system.
. Partiti oned USB devices may not be played
correctly.
. Some characters used in other languages (Chi-
nese, Japanese, etc.) are not displayed properly
on display. Using English language characters
with a USB device is recommended.
General notes for USB use:
. The USB device may not function when the
passenger compartment temperature is extremely
high. Lower the temperature before use.
. During cold weather or rainy days, the player may
malfunction due to humidity. If this occurs, remove
the USB device and dehumidify or ventilate the
USB player completely.
. Do not connect a USB device if a connector,
cable or USB port is wet. Allow the connector,
cable, and USB port to dry completely before
connecting the USB device. (Wait for 24 hours or
more until it is dry.) If the connector and USB port
are exposed to fluids other than water, evaporative
residue may cause a short circuit between the
connector pins and USB port. In this case, replace
the cable and USB port. Otherwise damage to the
USB device and a loss of function may occur.
. If the cable is damaged (insulation cut, connectors
cracked, contamination such as liquids, dust, dirt,
etc. in the connectors), do not use the cable.
Replace the cable with a new one.
. Do not put a USB device in a location where static
electricity occurs, electrical noise is generated or
hot air from the air conditioner blows directly on it.
Doing so may cause the data stored on the USB
device to be corrupted.
Notes for iPod use (if equipped):
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
. Improperly plugging in the iPod may cause a
checkmark to be displayed on and off (flickering).
Always make sure that the iPod is connected
properly.
. An iPod nano (1st Generation) may remain in fast
forward or rewind mode if it is connected during a
seek operation. In this case, please manually reset
the iPod.
. An iPod nano (2nd Generation) will continue to
fast-forward or rewind if it is disconnected during
a seek operation.
. An incorrect song title may appear when the Play
Mode is changed while using an iPod nano (2nd
Generation)
. Audiobooks may not play in the same order as
they appear on an iPod.
. Large video files cause slow responses in an iPod.
The vehicle center display may momentarily black
out, but will soon recover.
. If an iPod automatically selects large video files
while in the shuffle mode, the vehicle center
display may momentarily black out, but will soon
recover.
Bluetooth
®
Audio player (if equipped)
GUID-1290AA2C-8C46-4510-BEB2-EE7D857CB85A
. Some Bluetooth
®
audio devices may not be used
with this system. For detailed information about
Bluetooth
®
audio devices that are available for use
with this system, contact a NISSAN dealer.
. Before using a Bluetooth
®
audio system, the initial
registration process for the audio device is
necessary.
. Operation of the Bluetooth
®
audio system may
vary depending on the audio device that is
connected. Confirm the ope ration p rocedure
before use.
. The playback of Bluetooth
®
audio will be paused
under the following conditions. The playback will
be resumed after the following conditions are
completed.
— while using a Hands-free phone
— while checking a connection with a cellular
phone
. The in-vehicle antenna for Bluetooth
®
commu-
nication is built in the system. Do not place the
Bluetooth
®
audio device in an area surrounded by
metal, far away from the system or in a narrow
space where the device closely contacts the body
or the seat. Otherwise, sound degradation or
connection interference may occur.
. While a Bluetooth
®
audio device is connected
through the Bluetooth
®
wireless connection, the
battery power of the device may discharge quicker
than usual.
. This system is compatible with the Bluetooth
®
AV
profile (A2DP and AVRCP).
Bluetooth
®
is a trademark owned
by Bluetooth SIG, Inc., and li-
censed to Daewoo IS Corp.
Compact Disc / USB memory device with
MP3 or WMA (if equipped)
GUID-4B589A86-B59B-43D5-8BBD-29B138FC39CB
Explanation of terms:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
. MP3 — MP3 is short for Moving Pictures Experts
Group Audio Layer 3. MP3 is the most well known
compressed digital audio file format. This format
allows for near “CD quality” sound, but at a
fraction of the size of normal audio files. MP3
conversion of an audio track from CD can reduce
the file size by approximately 10:1 ratio (Sampling:
44.1 kHz, Bit rate: 128 kbps) with virtually no
perceptible loss in quality. MP3 compression
removes the redundant and irrelevant parts of a
sound signal that the human ear doesn’t hear.
. WMA — Windows Media Audio (WMA) is a
compressed audio format created by Microsoft as
an alternative to MP3. The WMA codec offers
greater file compression than the MP3 codec,
enabling storage of more digital audio tracks in the
same amount of space when compared to MP3s
at the same level of quality.
. Bit rate — Bit rate denotes the number of bits per
second used by a digital music files. The size and
quality of a compressed digital au dio file is
determined by the bit rate used when encoding
the file.
. Sampling frequency — The rate at which the
samples of a signal are converted from analog to
digital (A/D conversion) per second.
. Multisession — Multisession is one of the methods
for writing data to media. Writing data once to the
media is called a single session, and writing more
than once is called a multisession.
Monitor, Heater and air conditioner, and audio system 4-13
4-14 Monitor, Heater and air conditioner, and audio system
. ID3/WMA Tag — The ID3/WMA tag is the part of
the encoded MP3 or WMA file that contains
information about the digital music file such as
song title, artist, album title, encoding bit rate,
track time duration, etc. ID3 tag information is
displayed on the Album/Artist/Song title line on
the display.
* Windows
®
and Windows Media
®
are registered
trademarks and trademarks in the United States of
America and other countries of Microsoft Corporation
of the USA.
Playback order:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
SAA1025
Playback order chart
The music playback order of the CD with MP3 or
WMA is as illustrated.
. The names of folders not containing MP3 or WMA
files are not shown in the display.
. If there is a file in the top level of the disc, “Root
Folder” is displayed.
. The playback order is the order in which the files
were written by the writing software. Therefore,
the files might not play in the desired order.
Specification chart (model with type A, B, C audio unit):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Supported media CD, CD-R, CD-RW
Supported file systems
ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet
ISO9660 Level 3 (packet writing) is not supported.
Files saved using the Live File System component (on a Windows Vista-based computer)
are not supported.
Supported versions*1
MP3
Version MPEG1, MPEG2, MPEG2.5
Sampling frequency 8 kHz - 48 kHz
Bit rate 8 kbps - 320 kbps, VBR*4
WMA*3
Version WMA7, WMA8, WMA9
Sampling frequency 32 kHz - 48 kHz
Bit rate 32 kbps - 192 kbps, VBR*4
Tag information (Song title and Artist name)
ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)
WMA tag (WMA only)
Folder levels
Folder levels: 8, Folders: 255 (including route folder), Files: 512 (Max. 255 files for one
folder)
Displayable character codes*2
01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE
(UTF-16 Non-BOM Big Endian), 05: UNICODE (UTF-8), 06: UNICODE (Non-UTF-16
BOM Little Endian)
*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.
*2 Available codes depend on what kind of media, versions and information are going to be displayed.
*3 Protected WMA files (DRM) cannot be played.
*4 When VBR files are played, the playback time may not be displayed correctly. WMA7 and WMA8 are not applied to VBR.
Monitor, Heater and air conditioner, and audio system 4-15
4-16 Monitor, Heater and air conditioner, and audio system
Specification chart (model with type D, E, F audio unit):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Supported media CD, CD-R, CD-RW, USB2.0
Supported file systems
CD, CD-R, CD-RW: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet
* ISO9660 Level 3 (packet writing) is not supported.
* Files saved using the Live File System component (on a Windows Vista-based computer) are
not supported.
USB memory device: FAT16, FAT32
Supported versions*1
MP3
Version MPEG1 Audio Layer 3
Sampling frequency 8 kHz - 48 kHz
Bit rate 8 kbps - 320 kbps, VBR*4
WMA*2
Version WMA7, WMA8, WMA9
Sampling frequency 32 kHz - 48 kHz
Bit rate 32 kbps - 192 kbps, VBR*4
Tag information (Song title and Artist name)
ID3 tag VER1.0, VER1.1, VER2.2, VER2.3, VER2.4 (MP3 only)
WMA tag (WMA only)
Folder levels
CD, CD-R, CD-RW
Folder levels: 8, Folders and files: 999 (Max. 255 files for one folder)
USB (model with type D
audio unit)
Folder levels: 8, Folders 255, Files: 65535 (Max. 999 files for one folder)
Memory size: 4GB
USB (model with type E, F
audio unit)
Folder levels: 8, Folders 255, Files: 2500 (Max. 255 files for one folder)
Memory size: 4GB
Displayable character codes*3
01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16
Non-BOM Big Endian), 05: UNICODE (UTF-8), 06: UNICODE (Non-UTF-16 BOM Little
Endian), 07: SHIFT-JIS
*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.
*2 Protected WMA files (DRM) cannot be played.
*3 Available codes depend on what kind of media, versions and information are going to be displayed.
*4 When VBR files are played, the playback time may not be displayed correctly.
Troubleshooting guide (model with type A, B, C audio unit):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Symptom Cause and Countermeasure
Cannot play
Check if the disc was inserted correctly.
Check if the disc is scratched or dirty.
Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour) before using the
player.
If there is a temperature increase error, the CD player will play correctly after it returns to the normal temperature.
If there is a mixture of music CD files (CD-DA data), MP3/WMA files on a CD, only the music CD files (CD-DA data) will be played.
Files with extensions other than “.MP3”, “.WMA”, “.mp3” or “.wma” cannot be played. In addition, the character codes and number of
characters for folder names and file names should be in compliance with the specifications.
Check if the disc or the file is generated in an irregular format. This may occur depending on the variation or the setting of MP3/WMA
writing applications or other text editing applications.
Check if the finalization process, such as session close and disc close, is done for the disc.
Check if the disc is protected by copyright.
Poor sound quality Check if the disc is scratched or dirty.
It takes a relatively long time before
the music starts playing.
If there are many folder or file levels on the MP3/WMA disc, or if it is a multisession disc, some time may be required before the music
starts playing.
Music cuts off or skips
The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc., might not
match the specifications. Try using the slowest writing speed.
Skipping with high bit rate files Skipping may occur with large quantities of data, such as for high bit rate data.
Move immediately to the next song
when playing.
When a non-MP3/WMA file has been given an extension of “.MP3”, “.WMA”, “.mp3, “.wma”, or when play is prohibited by copyright
protection, there will be approximately 5 seconds of no sound and then the player will skip to the next song.
The songs do not play back in the
desired order.
The playback order is the order in which the files were written by the writing software, so the files might not play in the desired order.
Monitor, Heater and air conditioner, and audio system 4-17
4-18 Monitor, Heater and air conditioner, and audio system
Troubleshooting guide (model with type D, E, F audio unit):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Symptom Cause and Countermeasure
Cannot play
Check if the disc or USB memory device was inserted correctly.
Check if the disc is scratched or dirty.
Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour) before
using the player.
If there is a temperature increase error, the player will play correctly after it returns to the normal temperature.
If there is a mixture of music CD files (CD-DA data) and compressed audio files on a CD, only the music CD files (CD-DA
data) will be played.
Files with extensions other than “.MP3 (.mp3)” or “.WMA (.wma)” cannot be played. In addition, the character codes and
number of characters for folder names and file names should be in compliance with the specifications.
Check if the disc or the file is generated in an irregular format. This may occur depending on the variation or the setting of
compressed audio writing applications or other text editing applications.
Check if the finalization process, such as session close and disc close, is done for the disc.
Check if the disc or USB memory device is protected by copyright.
Poor sound quality
Check if the disc is scratched or dirty.
It takes a relatively long time before the music
starts playing.
If there are many folder or file levels on the disc or USB memory device, some time may be required before the music
starts playing.
Music cuts off or skips
The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc.,
might not match the specifications. Try using the slowest writing speed.
Skipping with high bit rate files Skipping may occur with large quantities of data, such as for high bit rate data.
Move immediately to the next song when playing.
If an unsupported compressed audio file has been given a supported extension like .MP3, or when play is prohibited by
copyright protection, the player will skip to the next song.
The songs do not play back in the desired order.
The playback order is the order in which the files were written by the writing software, so the files might not play in the
desired order.
Random/Shuffle may be active on the audio system or on a USB memory device.
ANTENNA (if equipped)
GUID-70C6C263-ACF5-46D4-8F17-91DC5DA13F7 5
JVH0390X
Adjust the antenna angle for the best reception.
Removing antenna
GUID-2D7BCF6A-4077-4BD0-ABA9-8BF62218818F
You can remove the antenna if necessary.
Hold the bottom of the antenna and remove by turning
counterclockwise.
To install the antenna, turn the antenna clockwise and
tighten.
CAUTION:
. Be sure to fold down the antenna before the
vehicle enters a garage with a low ceiling.
. Be sure that antenna is removed before the
vehicle enters an automatic car wash.
Monitor, Heater and air conditioner, and audio system 4-19
4-20 Monitor, Heater and air conditioner, and audio system
FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type A)
GUID-D510DEF2-289A-40B2-B1DD-B8A7DA5F87FE
SAA3122
1. MUTE button
2. FM radio band select button
3. AM radio band select button
4. CD button
5. AUX button
6. CD EJECT button
7. MENU button
8. SEEK/TRACK button
9. TUNE/FF(Forward)·REW(Rewind)/FOLDER
button
10. SCAN button
11. RDM (Random) button
12. Power button/VOL (Volume) control knob
13. AUX IN (auxiliary input) jack
14. RPT (Repeat) button
15. AUTO.P (Automatic Preset) button
16. Radio memory buttons (1 - 6)
17. DISP (Display) button
4-22 Monitor, Heater and air conditioner, and audio system
Loading:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. To stop playing, push the Power
button.
CAUTION:
Do not force the compact disc into the slot. This
could damage the player.
button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD is loaded,
the CD will start playing automatically.
button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD with a title
is being played, the display will change as follows:
CD:
NOS2417
CD with MP3 or WMA:
NOS2418
SEEK/TRACK button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD is being
played, the present track will be advanced and move to
the next track. Push the
button several times to
skip forward tracks. The CD will advance the number
of times the button is pushed. When the last track of
the CD is forwarded, the first track will be played.
When the
button is pushed while a CD is being
played, the present track will start over from the
beginning of the current track. Push the
button
several times to skip back tracks. The CD will rewind
the number of times the button is pushed. When the
first track of the CD is rewound, the last track will be
played.
TUNE/FF·REW/FOLDER button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the or button is pushed and held
while a CD is being played, the CD will be played while
forwarding or rewinding. When the button is released,
the CD will return to the normal play speed.
When the
or button is pushed while a CD
with MP3 or WMA is being played, the first track in the
next or the previous folder will be played.
button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD is being
played, the first 10 seconds of all the tracks will be
played.
When the
button is pushed again, the CD will
return to normal play from the track which is playing.
(Repeat) button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To change the play settings, push the button to
select the mode.
CD:
RPT DISC ? RPT TRACK
CD with MP3 or WMA:
RPT DISC ? RPT FOLDER ? RPT TRACK
RPT DISC:
All the tracks of the CD will be played continuously in
sequential order. The display indicates no symbol
mark. While the
button is pushed, the display
indicates “RPT DISC”.
RPT TRACK:
The selected track of the CD will be played con-
tinuously. While the
button is pushed, the display
indicates “RPT TRACK”.
RPT FOLDER:
All the tracks of selected folder will be p layed
continuously in sequential order (CD with MP3 or
WMA only). While the
button is pushed, the
display indicates “RPT FOLDER”.
(Random) button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To change the play sequence, push the button to
select the mode.
CD:
RDM DISC ? RPT DISC
CD with MP3 or WMA:
RDM DISC ? RDM FOLDER ? RPT DISC
RPT DISC:
All the tracks of the CD will be played continuously in
sequential order. The display indicates no symbol
mark. While the
button is pushed, the display
indicates “RPT DISC”.
RDM DISC:
All the tracks or folders (CD with MP3 or WMA only) of
the CD will be played continuously in random order.
While the
button is pushed, the display indicates
“RDM DISC”.
RDM FOLDER:
All the tracks of the selected folder will be played
continuously in random order (CD with MP3 or WMA
only). While the
button is pushed, the display
indicates “RDM FOLDER”.
CD EJECT button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To eject a CD, push the CD EJECT button.
When the
button is pushed twice, the CD will be
ejected further, and the CD can be removed with ease.
If a CD is ejected by pushing the
button, and it is
not taken out from the loading slot, the CD will
automatically be reloaded to the slot to protect the CD
(12 cm discs only).
FM-AM radio operation
GUID-DF096F53-6064-4D10-B87D-721A74E9E378
SAA3123
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
/ button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the / button is pushed while the audio
system is off, the audio system will turn on and the
radio will turn on.
When the
/ button is pushed while another
audio source is playing, the another audio source will
turn off and the radio will turn on.
To change the radio bands, push the
/ button
until the desired band (FM1, FM2, AM) is displayed.
The FM stereo indicator, “ST” will display during FM
stereo reception. When the stereo broadcast signal is
weak, the radio will automatically change from stereo
to monaural reception.
TUNE/FF·REW/FOLDER button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
manually, push the
or button until the desired
frequency is achieved.
When adjusting the broadcasting station frequency
automatically, push the
or button. When the
system detects a broadcasting station, it will stop at
the station.
SEEK UP/DOWN button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
automatically, push the
button. When the
system detects a broadcasting station, it will stop at
the station.
button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed, the system will seek
and stop at the detected broadcasting station for 5
seconds, and then it will start to seek for the next
broadcasting station.
Push the
button in this 5-second period to stop
seeking.
Radio memory button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The audio system can store up to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
To store the station frequency:
1. Tune to the desired broadcasting station fre-
quency by using the
or button.
2. Push and hold a memory button (1 - 6) until a
beep sounds.
3. The switch number and frequency will appear on
the display when the memory is stored properly.
4. Perform steps 1 - 3 for all other memory buttons.
Push a memory button (1 - 6) to select a desired
memory.
If the battery cable is disconnected, or if the audio fuse
blows, the radio memory will be erased. In such a case,
reset the desired stations.
(Automatic Preset) button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The audio system can store up to 6 FM station
frequencies and 6 AM station frequencies.
To store the station frequency automatically, push and
hold the
button until a beep sounds. The station
will be automatically stored in the “AUTO.P” memory.
The display indicates “AP-**”.
Monitor, Heater and air conditioner, and audio system 4-23
4-24 Monitor, Heater and air conditioner, and audio system
Push the button to select a desired memory.
FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type B)
GUID-DEAAE749-895D-46F1-A5DA-966300E348EA
JVH0003X
1. Sound preference button
2. TA (Traffic Announcement)/NEWS button
3. FM·AM band select button
4. CD button
5. AUX button
6. CD EJECT button
7. MENU button
8. SEEK/TRACK button
9. TUNE button
10. ENTER button
11. PHONE END/BACK button
12. POWER ON/OFF button/VOLU ME control
knob
13. AUX IN (auxiliary input) jack
14. PHONE SEND button
15. PHONE BOOK button
16. Radio memory buttons
17. RPT (Repeat)/MIX (Mix play) button
Anti-theft system (if equipped)
GUID-7992F1A2-D71A-49A4-89B6-9A8B63656386
This unit can only be activated when the ignition switch
for NATS is in the “ACC” or “ON” position. Each radio
is uniquely matched to the vehicle’s immobilizer and
therefore cannot be transferred to any other vehicle.
Audio main operation
GUID-E4544D95-4AC4-49F3-8C6B-CF45CC7678F5
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
POWER ON/OFF button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To turn on the audio system, push the POWER ON/
OFF button.
. The system will turn on in the mode, (radio or CD)
which was used immediately before the system
was turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the POWER ON/
OFF button.
Volume control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To control the volume, turn the VOLUME control dial.
Turn the VOLUME control dial clockwise to make the
sound louder.
Turn the VOLUME control dial counterclockwise to
make the sound quieter.
Sound preference button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To enter the audio mode (radio or CD), push the
button. When no CD is loaded, the audio system will
automatically switch to the radio mode.
To change the audio settings (BASS, TREBLE ,
FADER, BALANCE, EQ), push the
button or
ENTER button to select the mode.
BASS ? TREBLE ? BALANCE ? FADER ? EQ ?
BASS
To adjust each audio setting, turn the VOL control dial
clockwise or counterclockwise.
BASS: (−) to decrease / (+) to increase
TREB(LE): (−) to decrease / (+) to increase
BAL(ANCE): (R) to right balance / (L) to left balance
FADE(R): (F) to front fade / (R) to rear fade
EQ (Equalizer): Use this control to change the preset
sound mode for CD play.
Turn the MENU/VOL dial clockwise or counterclock-
wise. The mode will change as follows:
OFF Û ENHANCE
If the audio settings mode is unchanged for approxi-
mately 8 seconds, the audio settings mode will
automatically return to the normal mode.
MENU button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To configure the SPEED volume and BEEP settings,
perform the following procedure:
1. Push the MENU button.
2. Turn the VOLUME dial clockwise or counter-
clockwise. The display message will change as
follows:
PHONE SETUP ÛSPEED VOL Û CLOCK Û
BEEP Û PHONE SETUP
. When SPEED VOL appears on the display, briefly
push on the ENTER button then turn the VOLUME
dial clockwise or counterclockwise to adjust the
level of the volume.
Adjusting the setting to 0 (zero) turns off the
speed volume feature . Increasing the speed
volume setting results in the audio volume
increasing more rapidly with vehicle speed. Push
the ENTER button again to save the setting.
. When BEEP appears on the display, briefly push
the ENTER button and then turn the VOLUME dial
clockwise or counterclockwise to switch the beep
sound on or off. Push the ENTER button again to
save the setting.
To confi gure Alternative Frequ ency, Regional and
Language settings, perform the following procedure:
1. Push and hold the MENU button for at least 1.5
seconds.
2. Turn the VOLUME dial clockwise or counter-
clockwise. The display message will change as
follows:
AF Û REG Û LANGUAGE Û AF
. To activate or deactivate the AF and REG mode,
briefly push on the ENTER button when AF or
REG appears on the display and turn the
VOLUME dial clockwise or counterclockwise to
switch between the off or on position. After
selection, push the ENTER button to confirm the
settings.
— When the AF mode is enabled, the audio unit
will automatically re-tune to a stronger fre-
quency if the radio signal becomes weak.
— When the REG mode is enabled, the audio unit
will maintain and hold the station which is
broadcasting local (regional) programmes.
. To change the display language, briefly push the
ENTER button when LANGUAGE appears on the
display then turn the VOLUME dial clockwise or
counterclockwise to select the appropriate lan-
guage setting.
ENGLISH Û DUTCH Û FRENCH Û SPANISH
Û GERMAN Û ITALIAN Û PORTUGUESE Û
ENGLISH
After selecting the desired language, push the
Monitor, Heater and air conditioner, and audio system 4-25
4-26 Monitor, Heater and air conditioner, and audio system
ENTER button to exit the menu.
After the desired levels have been set, push the MENU
button to exit the menu or wait at least for 10 seconds
without pressing any buttons.
Clock :
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Clock display can be turned on and off, and clock can
be adjusted.
. When clock is not displayed
1. Turn the audio unit on by pushing the POWER
ON/OFF button.
2. Push the MENU button and turn the VOLUME
control knob until “CLOCK” is displayed.
3. Push the ENTER button. (“CLOC K OFF” is
displayed)
4. Turn the VOLUME control knob to turn the clock
display mode on. (“CLOCK ON” is displayed)
5. Push the ENTER button. The hour display will start
flashing.
6. Turn the VOLUME control knob to adjust the time.
7. Push the ENTER button. The minute display will
start flashing.
8. Turn the VOLUME control knob to adjust the time.
9. Push the ENTER button to finish the clock
adjustment.
. When clock is displayed
1. Turn the audio unit on by pushing the POWER
ON/OFF button.
2. Push the MENU button and turn the VOLUME
control knob until “CLOCK” is displayed.
3. Push the ENTE R button. (“CLOCK ON” i s
displayed.)
4. Perform steps 5 to 9 above to adjust the time.
AUX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The AUX IN jack is located on the audio unit. The AUX
IN audio input jack accepts any standard analog audio
input such as from a portable cassette tape/CD player,
MP3 player, laptop computers, etc.
Push the AUX button to play a compatible device when
it is plugged into the AUX IN jack.
Nissan strongly recommends using a stereo mini plug
cable when connecting your music device to the audio
system. Music may not play properly when a monaural
cable is used.
CD player operation
GUID-ABB6ED79-DF91-44C1-9FE5-85B2D4B17345
JVH0004X
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
Loading:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. If the radio is already playing, it will
automatically turn off, and the CD will start playing.
CAUTION:
Do not force the CD into the slot. This could
damage the player.
After loading the CD, the number of tracks and the
playtime will appear on the display.
8 cm (3.1 in) diameter CDs can be played without
using an adapter.
CD button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while the audio
system is off and a CD is loaded, the audio system will
turn on and a CD will start playing automatically. If the
radio is already playing, it will automatically turn off and
the CD will start playing.
FF (Fast Forward), REW (Rewind)
button :
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the or button while a CD is being
played to fast-forward or rewind through the track.
When the button is released, the CD will return to
normal play speed.
TRACK UP/ DOWN button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD is being
played, the present track will be advanced and move to
the next track. Push the
button several times to
skip forward tracks. The CD will advance the number
of times the button is pushed. When the last track of
the CD is forwarded, the first track will be played.
When the
button is pushed while a CD is being
played, the present track will start over from the
beginning. Push the
button several times to skip
back tracks. The CD will rewind the number of times
the button is pushed. When the first track of the CD is
rewound, the last track will be played.
Repeat/MIX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button repeatedly to change the play
mode as follows:
RPT (REPEAT) TRACK ? MIX DISC ? RPT
(REPEAT) ALL
RPT TRACK: The CD player plays the current track
continuously.
RPT ALL: All the tracks on the CD will be played in
sequential order.
MIX DISC: All the tracks on the CD will be played in a
random order.
CD EJECT button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD is loaded,
the CD will be ejected.
When the
button is pushed twice, the CD will be
ejected further, and the CD can be removed with ease.
If a CD is ejected by pushing the
button, and it is
not taken out from the loading slot, the CD will
automatically be reloaded to the slot to protect the CD.
FM-AM radio operation
GUID-62577150-AB9A-4822-B2C1-0903FBA292E8
JVH0004X
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
FM-AM button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while the audio
system is off, the audio system will turn on and the
radio will turn on. When the
button is pushed
while CD is already operating, it will automatically turn
off, and the radio will turn on.
To change the radio bands, push the
button until
the desired band appears.
FM 1 ? FM 2 ? FM T ? MW ? LW
During FM reception, when the
button is pushed
for longer than 1.5 seconds, stations are searched for
and the 6 stations of the FM T band. The sound is
muted until the auto store operation is completed,
upon which preset channel 1 is automatically tuned in.
TUNE button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
manually, push the
button until the desired
frequency is achieved.
The frequency changes in steps of 100 kHz on the FM
band, 9 kHz on the MW band, and 3 kHz on the LW
band.
SEEK button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
automatically, push the
button. When the
system detects a broadcasting station, it will stop at
the station.
*
1
*
2
*
3
*
4
*
5
*
6
Radio memory buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The audio system can store up to 18 FM station
frequencies (six in each of FM 1, FM 2 and FM T), 6
MW and 6 LW station frequencies.
To store the station frequency manually:
1. Tune to the desired broadcasting station fre-
quency by using the
or
button.
2. Push and hold a radio memory button
*
1
-
*
6
until a beep sounds. (The radio mutes when the
memory button is pushed.)
3. The channel indicator will display and the radio
mute disengages, indicating that the memory is
stored properly.
4. Perform steps 1 - 3 for all other memory buttons.
If the battery cable is disconnected, or if the audio fuse
blows, the radio memory will be erased. In such a case,
reset the desired stations.
Monitor, Heater and air conditioner, and audio system 4-27
4-28 Monitor, Heater and air conditioner, and audio system
Radio data system (RDS)
GUID-4A9782F1-308C-4422-8258-DBF1D2A91C68
Alternative Frequency (AF):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
. The AF function operates in the FM (radio) and CD
modes.
. When the AF mode is set to “ON” in the user
setup menu mode, the AF indicator illuminates.
For activation or deactivation details, see “Audio main
operation” (P.4-25).
. Automatic switching function
This function compares the strengths of the
signals of all the stations on the AF list and
selects the station with the optimum reception
conditions.
. Program Information (PI) search
Program Information (PI) search begins automati-
cally if no suitable station is found with the above
automatic switching function. The PI search
function checks each RDS station with the same
PI code. During this time the sound is muted and
“PI SEARCH” is displayed. The PI search opera-
tion stops when a suitable station is found. If no
station is found once all the frequencies have been
searched, the radio retur ns to the previous
frequency.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
When EON data is being received, this enables
automatic retuning of other preset stations on the
same network. Also, network linked services can
be used. The EON indicator turns on during the
reception of RDS EON stations in the FM mode.
RDS functions:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
. Programme Service (PS) function (station
name display function)
When an RDS station is tuned in with seek or
manual tuning, the RDS data is received and the
Program Service (PS) name is displayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION — EBU SPEC FOR
INFO)
When the radio receives PTY code 31 (an
emergency broadcast code), the sound is inter-
rupted, the emergency broadcast is heard, and
“PTY31 ALARM” is displayed. The volume level at
this time is the same as that for traffic announce-
ments. Once the emergency broadcast is finished,
the unit immediately returns to the previous
source.
. REG (Regional) mode
Some local radio stations are linked together
according to their region because they only offer
limited coverage due to their limited number of
transmitters. If the signal from one station be-
comes weak while you are driving around, RDS
mode will switch to another local station in the
region with a stronger signal.
When the REG mode is activated in the FM band
and the radio receiver is tuned to a local radio
station, it will keep receiving this radio station
without switching to another local station. For
activation or deactivation details, see “Audio main
operation” (P.4-25).
Traffic Announcement (TA):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
. The TA function operates in the FM and CD
modes.
. The TA mode is turned on or off when the TA/
NEWS button is pushed for less than 2 seconds.
. The TA mode operates regardless of whether the
AF mode is on or off.
. “TA ON” is displayed when the TA mode is turned
on, and the TA indicator turns on. “TA OFF” is
displayed when the TA mode is turned off, and the
TA indicator turns off.
The following function operates when the TA mode is
on:
. Traffic announcement interrupt function
When a traffic announcement is received, the
announcement is t uned in and the volume
increases to the set level.
Once the traffic announcement is finished, the unit
returns to the source which was set before the
traffic announcement started, and the volume
returns to the previous level. For EON stations,
the radio is interrupted by another EON station
with traffic announcements.
The traffic announcement interrupt mode is
cancelled if the TA/NEWS bu tton is pushed
during a traffic announcement. The TA mode
returns to the standby mode and the audio unit
returns to the previous source.
News mode:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the NEWS button or the TA/NEWS button is
pushed for longer than 2 seconds in the FM mode, the
news function is activated. “NEWS” is displayed for 3
seconds and the NEWS indicator appears on the
display.
When the news function is activated, the radio
receives a news code from the FM broadcasting news
station and the play mode will be interrupted. Once the
news broadcast is finished, the unit returns to the
previous mode.
In some countries or regions, this serv i c e is n ot
available or the signal is too weak to be received.
1. News standby mode
.
The news standby mode can be activated in
the FM or CD mode.
.
A news interruption will be announced and
“NEWS” will be displayed when the radio
detects the news code from the tuned station
or EON stations. The display will then change
to the PS name of the interrupting station.
.
When pushing the NEWS button or pushing
the TA/NEWS button for longer tha n 2
seconds, the news standby mode is turned
off and the indicator disappears from the
display.
2. News interruption mode
.
When the NEWS button or the TA/NEWS
button is pushed during the news interruption
mode, the radio returns to the previous source.
However, the news standby mode is kept.
.
When the
button is pushed during the
news interruption mode, the radio changes to
the CD mode. However, the news standby
mode is kept.
If the radio band is changed to the MW or LW,
the news standby mode will be turned off.
FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type C)
GUID-19188120-A5DD-467A-9930-69AB282576B0
JVH0200X
1. MUTE button
2. FM·AM radio band select button
3. CD button
4. Radio memory buttons
5. AUX button
6. CD EJECT button
7. DISP button
8. SEEK/TRACK/FILE button
9. SCAN button
10. RDM (Random) button
11. RPT (Repeat) button
12. Power button/Volume control knob
13. AUX IN (auxiliary input) jack
14. AUTO.P (Automatic Preset) button
15. SCRL (Scroll) button
16. TUNE/FF (Forward)·REW (Rewind)/F OLDER
button
Monitor, Heater and air conditioner, and audio system 4-29
Loading:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. To stop playing, push the Power
button.
CAUTION:
Do not force the compact disc into the slot. This
could damage the player.
button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD is loaded,
the CD will start playing automatically.
button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD with a title
is being played, the display will change as follows:
CD:
NOS2417
CD with MP3 or WMA:
NOS2418
SEEK/TRACK/FILE button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button (located on the left side) is
pushed while a CD is being played, the present track
will be advanced and move to the next track. Push
the
button several times to skip forward tracks.
The CD will advance the number of times the button is
pushed. When the last track of the CD is forwarded,
the first track will be played.
When the
button is pushed while a CD is being
played, the present track will start over from the
beginning of the current track. Push the
button
several times to skip back tracks. The CD will rewind
the number of times the button is pushed. When the
first track of the CD is rewound, the last track will be
played.
TUNE/FF·REW/FOLDER button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the or button (located on the
right side) is pushed and held while a CD is being
played, the CD will be played while forwarding or
rewinding. When the button is released, the CD will
return to the normal play speed.
When the
button or is pushed while a
CD with MP3 or WMA is being played, the first track in
the next or the previous folder will be played.
button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD is being
played, the first 10 seconds of all the tracks will be
played.
When the
button is pushed again, the CD will
return to normal play from the track which is playing.
(Repeat) button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To change the play settings, push the button to
select the mode.
CD:
RPT DISC ? RPT TRACK
CD with MP3 or WMA:
RPT DISC ? RPT FOLDER ? RPT TRACK
RPT DISC:
All the tracks of the CD will be played continuously in
sequential order. The display indicates no symbol
mark. While the
button is pushed, the display
indicates “RPT DISC”.
RPT TRACK:
The selected track of the CD will be played con-
tinuously. While the
button is pushed, the display
indicates “RPT TRACK”.
RPT FOLDER:
All the tracks of selected folder will be p layed
continuously in sequential order (CD with MP3 or
WMA only). While the
button is pushed, the
display indicates “RPT FOLDER”.
(Random) button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To change the play sequence, push the button to
select the mode.
CD:
RDM DISC ? RPT DISC
CD with MP3 or WMA:
RDM DISC ? RDM FOLDER ? RPT DISC
RPT DISC:
All the tracks of the CD will be played continuously in
sequential order. The display indicates no symbol
mark. While the
button is pushed, the display
indicates “RPT DISC”.
RDM DISC:
All the tracks or folders (CD with MP3 or WMA only) of
the CD will be played continuously in random order.
While the
button is pushed, the display indicates
Monitor, Heater and air conditioner, and audio system 4-31
4-32 Monitor, Heater and air conditioner, and audio system
“RDM DISC”.
RDM FOLDER:
All the tracks of the selected folder will be played
continuously in random order (CD with MP3 or WMA
only). While the
button is pushed, the display
indicates “RDM FOLDER”.
(Scroll) button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the title is displayed but it is a long one, the
whole title is not shown in the display. In this case,
push the button to scroll the title. When the title is
scrolled to the end of it, the display will stop moving
and return to the first condition.
CD EJECT button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To eject a CD, push the CD EJECT button.
When the
button is pushed twice, the CD will be
ejected further, and the CD can be removed with ease.
If a CD is ejected by pushing the
button, and it is
not taken out from the loading slot, the CD will
automatically be reloaded to the slot to protect the CD
(12 cm discs only).
FM-AM radio operation
GUID-BC953870-C001-41D4-AC35-4C73F86C5B83
JVH0201X
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
Frequency range and step change (for Central/
South America):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To change the frequency range and step specification
of the radio, perform the following operations.
1. Turn the audio unit off by pushing the POWER
button.
2. Turn the audio unit on by pushing the POWER
button while pushing the radio memory buttons
and the button.
For Central/South America specification, the display
indicates “AM 530 kHz”.
For the other specification, the display indicates “AM
531 kHz”.
If you experience difficulties in changing radio speci-
fication, contact a NISSAN dealer.
button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while the audio
system is off, the audio system will turn on and the
radio will turn on.
When the
button is pushed while another audio
source is playing, the another audio source will turn off
and the radio will turn on.
To change the radio bands, push the
button until
the desired band is displayed.
. AM ? FM1 ? FM2
The FM stereo indicator, “ST” will display during FM
stereo reception. When the stereo broadcast signal is
weak, the radio will automatically change from stereo
to monaural reception.
TUNE/FF·REW/FOLDER button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
manually, push the
or button until the
desired frequency is achieved.
When adjusting the broadcasting station frequency
automatically, push the
or button.
When the system detects a broadcasting station, it
will stop at the station.
SEEK button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
automatically, push the
button. When the
system detects a broadcasting station, it will stop at
the station.
button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed, the system will seek
and stop at the detected broadcasting station for 5
seconds, and then it will start to seek for the next
broadcasting station.
Push the
button in this 5-second period to stop
seeking.
Radio memory button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The audio system can store up to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
To store the station frequency:
1. Tune to the desired broadcasting station fre-
quency by using the
or button.
2. Push and hold a memory button (1 - 6) until a
beep sounds.
3. The switch number and frequency will appear on
the display when the memory is stored properly.
4. Perform steps 1 - 3 for all other memory buttons.
Push a memory button (1 - 6) to select a desired
memory.
If the battery cable is disconnected, or if the audio fuse
blows, the radio memory will be erased. In such a case,
reset the desired stations.
(Automatic Preset) button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The audio system can store up to 6 FM station
frequencies and 6 AM station frequencies.
To store the station frequency automatically, push and
hold the
button until a beep sounds. The station
will be automatically stored in the “AUTO.P” memory.
The display indicates “AP-**”.
Push the
button to select a desired memory.
FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type D)
GUID-C5B9C7A9-DA96-4C91-B937-719DE16695BA
JVH0504X
1. CD eject button
2. MENU button
3. AUTO.P/DISP button
4. SCAN button
5. FM/AM band select button
6. MEDIA button
7. SEEK button
8. TRACK button
9. TUNE button
10. FOLDER button
11. Power/VOL dial
12. RDM button
13. Radio memory buttons
14. AUX IN jack
15. RPT button
16. USB connector
Monitor, Heater and air conditioner, and audio system 4-33
4-34 Monitor, Heater and air conditioner, and audio system
Audio main operation
GUID-B1112647-F5F0-4652-A1A3-253CDEE1121E
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
Power/VOL dial:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Power ON/OFF:
To turn on the audio system, push the
dial.
. The system will turn on in the mode, which was
used immediately before the system was turned
off.
. If a CD, a USB and/or an AUX device was
connected when the system was turned off, and if
the system was turned on again with the devices
disconnected, the radio will turn on.
To turn off the audio system, push the
dial.
Volume control:
To control the volume, turn the
dial.
Turn the
dial clockwise to make the sound louder.
Turn the
dial counterclockwise to make the sound
quieter.
MENU button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To change the audio settings, push the button to
select the mode.
Push the
button repeatedly until the desired mode
appears on the display.
(Normal) ? BAS (Bass) ? TRE (Treble) ? BAL
(Balance) ? FAD (Fader)? CLK (Clock) ? (Normal)
Push the
/ button or / button to
adjust the audio settings.
BAS: (−) to decrease / (+) to increase
TRE: (−) to decrease / (+) to increase
BAL: (R) to right balance / (L) to left balance
FAD: (F) to front fade / (R) to rear fade
Once the audio settings are set to the desired level,
push the
button until the normal audio display
appears.
If no action is performed for approximately 5 seconds,
the audio settings mode will automatically return to the
normal mode.
Clock display:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To display the clock on the screen, perform t he
following operations.
1. Push the
button repeatedly until “CLK ON” or
“CLK OFF” appears on the display while the audio
system is on.
2. Push the
/ button or / button
to select “CLK ON”.
The clock display can be turned on or off temporarily
by pushing the
button.
Clock adjustment:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To adjust the clock, turn the clock display on and
perform the following operations.
1. Push the
button while "CLK ON" is on the
display. The hour digits blink.
2. To adjust the hours, push the
/ button or
/ button.
3. Push the
button again. The minute digits
blink.
4. To adjust the minutes, push the
/ button
or
/ button.
If no user input is detected for 5 seconds, or when the
button is pushed, the clock setting mode will
automatically return to the normal mode.
MEDIA button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push this button to switch the mode to CD, USB or
another AUX device.
When the
button is pushed with no device
connected, the audio system does not change modes.
AUX IN jack:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The AUX IN jack is located on the audio unit. The AUX
IN audio input jack accepts any standard analog audio
input such as from a portable cassette tape player, CD
player, digital audio player or laptop computer.
Push the
button to play a compatible device when
it is plugged into the AUX IN jack.
NISSAN strongly recommends using a stereo mini
plug cable when connecting your music device to the
audio system. Music may not play properly when a
monaural cable is used.
WARNING:
Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
NOTE:
. Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts the plug of the
connector cable, noise may be heard.
. The connected external device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
CD player operation
GUID-F9879A46-FDA9-4558-B27E-F03F51ED19A9
JVH0505X
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
Loading:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. To stop playback, push the
dial.
CAUTION:
Do not force the compact disc into the slot. This
could damage the player.
MEDIA button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To play a CD, push the button repeatedly while
the CD is loaded until the display changes to the CD
mode.
SEEK/TRACK buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Fast forward/Rewind:
When the
or button is pushed and held
while a CD is being played, the CD will play while fast
forwarding or rewinding.
When the button is released, the CD will return to
normal play speed.
Track up/down:
To play the next track, push the
button while a CD
is playing.
To play the previous track, push the
button within
2 seconds after the current track starts playing. To
return to the beginning of the current track, push the
button after the current track has played for at
least 2 seconds.
TUNE/FOLDER buttons (for CD with
MP3/WMA):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To skip to the next or previous folder, push the or
button.
SCAN button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD is being
played, the first 10 seconds of all the tracks will be
played.
When the
button is pushed again, the CD will
return to normal play from the track which is playing.
RPT button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button to select the mode.
CD:
(Normal) ? RPT
CD with MP3 or WMA:
(Normal) ? Track RPT ? Folder RPT
Track RPT:
The selected track will play repeatedly.
Folder RPT (CD with MP3 or WMA only):
All the tracks in the selected folder will play repeatedly
in sequential order.
RDM button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button to select the mode.
CD:
(Normal) ? RDM
CD with MP3 or WMA:
(Normal) ? Folder RDM ? All RDM
Folder RDM:
All the tracks in the selected folder will play repeatedly
in random order.
All RDM:
All the tracks on the selected CD will play in random
order.
CD Eject button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To eject a CD, push the button.
When the
button is pushed twice, the CD will be
ejected further and the CD can be removed with ease.
If a CD is ejected by pushing the
button, and it is
Monitor, Heater and air conditioner, and audio system 4-35
4-36 Monitor, Heater and air conditioner, and audio system
not taken out from the loading slot, the CD will
automatically be reloaded to the slot to protect the CD.
FM-AM radio operation
GUID-2CABA29F-23D3-4B25-BAF4-520694DF93AE
JVH0505X
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
FM/AM band select button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while the audio
system is off, the audio system and the radio will turn
on.
When the
button is pushed while another audio
source is playing, the other audio source will turn off
and the radio will turn on.
To change the radio bands, push the
button until
the desired band is displayed.
AM ? FM1 ? FM2
TUNE/FOLDER buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
manually, push the
or button until the
preferred frequency is achieved.
SEEK/TRACK buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To adjust the broadcasting station frequency auto-
matically, push the
or button. When the
system detects a broadcasting station, it will stop at
that station.
SCAN button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed, the system will seek
and stop at the detected broadcasting station for 5
seconds, and then it will start to seek for the next
broadcasting station.
Push the
button in this 5-second period to stop
seeking.
(Radio memory) buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The audio system can store up to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
To store the station frequency:
1. Tune to the desired broadcasting station fre-
quency.
2. Push and hold a memory button (
- ) until a
beep sounds.
3. The switch number and frequency will appear on
the display when the memory is stored properly.
4. Perform steps 1 - 3 for all other memory buttons.
Push a memory button (
- ) to select the desired
memory.
If the battery cable is disconnected, or if the audio fuse
blows, the radio memory will be erased. In this case,
reset the desired stations.
AUTO.P/DISP button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The audio system can store up to 6 FM station
frequencies and 6 AM station frequencies.
To store the station frequency automatically, push and
hold the
button until a beep sounds. The station
will be automatically stored in the “AUTO.P” memory.
The display indicates “AUTO.P”.
Push the
button to select a memory.
USB memory device operation
GUID-F36722B8-C758-4C99-9504-BBF16449E7C0
JVH0505X
Audio main operation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The USB outlet connector is located on the audio unit.
Open the lid and connect a USB memory device into
the connector. The system switches to the USB mode
automatically.
If the system has been turned off while the USB
memory device was playing, pushing the
dial will
start playback of the USB memory device.
If the USB memory device cannot be played, the
message “CHK USB” will be displayed.
CAUTION:
. Do not force the USB memory device into
the USB port. Inserting the USB memory
device tilted or upside down into the port
may damage the USB memory device and/or
the port. Make sure that the USB memory
device is connected to the USB port cor-
rect ly. (Some USB devices come with a
mark as a guide. Make sure that the
mark is facing the correct direction before
inserting the device.)
. Do not place objects near the USB memory
device to prevent the objects from leaning
on the USB memory device and the port.
Pressure from the objects may damage the
USB memory device and/or the port.
MEDIA button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed with the system off
and the USB memory device is inserted, the system
will turn on.
If another audio source is playing and a USB memory
device is inserted, push the
button repeatedly
until the display changes to the USB mode.
SEEK/TRACK buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the or button is pushed and held
while a USB memory device is being played, the USB
memory device will play wh ile fast forwarding or
rewinding. When the button is released, the USB
memory device will return to normal play speed.
When the
or button is pushed while the USB
memory device is being played, the next track or the
beginning of the current track on the USB memory
device will be played.
TUNE/FOLDER buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To change to another folder in the USB memory
device, push the
or button.
RPT button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a USB memory
device is being played, the play pattern can be
changed as follows.
(Normal) ? Track RPT ? Folder RPT ? (Normal)
RDM button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a USB memory
device is being played, the play pattern can be
changed as follows.
(Normal) ? Folder RDM ? All RDM ? (Normal)
SCAN button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a USB memory
device is being played, the first 10 seconds of all the
tracks will be played.
When the
button is pushed again, the USB
memory device will return to normal play from the track
which is playing.
Monitor, Heater and air conditioner, and audio system 4-37
4-38 Monitor, Heater and air conditioner, and audio system
FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type E)
GUID-537DAEF8-6D11-45DA-A235-B326DFF97FFF
JVH0506X
1. Day/Night button
2. FM button
3. RPT button
4. MIX button
5. Radio memory buttons
6. A-Z button
7. AM button
8. CD eject button
9. CD button
10. Power/VOL dial
11. Rewind button
12. Fast Forward button
13. DISP button
14. SETUP button
15. Back button
16. TUNE/MENU/ENTER dial
17. AUX button
Audio main operation
GUID-678E2E1F-C725-4EBE-BB98-AF681C7A4933
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
Power/VOL dial:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Power ON/OFF:
To turn on the audio system, push the
dial.
. The system will turn on in the mode that was used
immediately before the system was turned off.
. If a CD is inserted, or a USB and/or an AUX
device is connected when the system is turned off,
and if the system was turned on again with the
devices removed or disconnected, the radio will
turn on.
To turn off the audio system, push the
dial.
Volume control:
To control the volume, turn the
dial.
Turn the
dial clockwise to make the sound louder.
Turn the
dial counterclockwise to make the sound
quieter.
SETUP button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To configure Audio, Clock, Language or Scroll direc-
tion settings, perform the following procedure:
1. Push the
button.
2. Push the
dial.
3. Turn the
dial clockwise or counterclockwise.
The setting menu will be displayed in the following
order:
Audio Û Clock Û Language Û Scroll Direction
After the desired levels have been set, either push the
button repeatedly, push the button, or wait
for several seconds without pushing any buttons to exit
the menu screen.
Audio adjustments:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button to enter the setup menu screen
and then select “Audio”.
Each time the
dial is pushed, the mode will
change as follows:
BASS ? TREBLE ? BALANCE ? FADE ? AUX
VOL ? Audio (setup menu screen) ? BASS
Turn the
dial clockwise or counterclockwise to
adjust the following items and push the
dial to
confirm.
Bass control:
Use this control to enhance or attenuate the bass
response sound.
Treble control:
Use this control to enhance or attenuate the treble.
Balance control:
Use this control to adjust the balance of the volume
between the left and right speakers.
Fader control:
Use this control to adjust the balance of the volume
between the front and rear speakers (if equipped).
AUX VOL (Auxiliary volume) control:
Use this control to adjust the volume output from the
auxiliary source.
Clock setting:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button to enter the setup menu screen
and then select “Clock”.
Turn the
dial. The mode will change as follows:
Set Time Û ON/OFF Û Clock Format Û Set Time
Set Time:
Select “Set Time” and then adjust the clock as follows:
The hour display will start flashing. Turn the
dial to
adjust the hour and push the
dial. The minute
display will start flashing. Turn the
dial to adjust
the minute and push the
dial to finish the clock
adjustment.
ON/OFF:
Set the clock display to on or off when the audio unit is
turned off. If set in the “ON” position, the clock will be
displayed when the audio unit is turned off either by
pushing the
dial or when the ignition switch is
placed in the “OFF” position.
Clock Format:
Switch the clock display between 24-hour and 12-
hour clock mode.
Language setting:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button to enter the setup menu screen
then select “Language”.
Select the appropriate language and push the
dial. Upon completion, the screen will automatically
adopt the language setting.
Scroll direction:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Set the scrolling behavior of the dial to scroll UP
or DOWN.
Day/Night button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button to switch the display brightness
between the daytime and nighttime modes.
Monitor, Heater and air conditioner, and audio system 4-39
4-40 Monitor, Heater and air conditioner, and audio system
AUX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button to play a compatible device when
it is connected.
CD player operation
GUID-80E425E8-EB3D-4F08-8A79-A2D1ED6D6C24
JVH0507X
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
Loading:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. After loading the CD, the number of
tracks and the playtime will appear on the display.
CAUTION:
Do not force the CD into the slot. This could
damage the player.
NOTE:
. The CD player accepts normal audio CDs or
CDs containing MP3/WMA files.
. The audio unit will automatically detect if a
CD containing MP3/WMA files is inserted,
and “MP3CD” will be displayed.
. An error notification message will be dis-
played when an incompatible dis c is in-
serted (e.g. DVD), or if the player cannot
read the CD. Eject the disc and insert
another disc.
List view:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
While the track is being played, push either the
dial or the button to display the available tracks in
a listed view mode. Turn the
dial to select a track
from the list, or a track to start listening to, and then
push the
dial.
Quick search:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
In the list view mode, a quick search can be performed
to find a track from the list. Push the
button, turn
the
dial to the first alphabetic letter of the song
title and then push the
dial. When found, a list of
the available songs will be displayed. Select a song
and then push the
dial to start playback.
CD button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while the audio
system is turned off and a CD is loaded, the audio
syste m will turn on and a CD will start playing
automatically. If the radio or AUX source mode is
already playing, it will automatically turn off and the CD
will start playing.
However, if a CD is not loaded, then a notification
message will be displayed and the audio unit will
remain in the radio or AUX source mode.
Fast Forward/Rewind buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push and hold the / buttons to fast forward
or rewind through the track. When the button is
released, the track will play at normal playing speed.
Track up/down:
By pushing the
/ buttons once, the track will
skip forward to the next track or backward to the
beginning of the current track. Push the
/
buttons more than once to skip through the tracks.
Folder browsing:
If the recorded media contains folders with music files,
pushing the
/ button will play the tracks of
each folder in sequence.
To select a preferred folder:
1. Push the
dial or button and a list of
tracks in the current folder will be displayed.
2. Push the
button.
3. Turn the
dial to highlight the preferred folder.
4. Push the
dial to access the folder. Push the
dial again to start playing the first track or
turn the
dial, and push the dial to select
another track.
If the current selected folder contains sub folders, push
the
dial, a new screen with a list of sub folders will
be displayed. Turn the
dial to highlight the sub
folder and then push the
dial to select. Select the
root folder item when songs are recorded additionally
in the root folder.
To return to the previous folder screen, push the
button.
RPT button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button and the current track will be
played continuously.
MIX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button and all the tracks will be played in
random order.
DISP button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
While a CD with recorded music information tags (CD-
text/ID3-text tags) is being played, the title of the
played track is displayed. If the title information is not
provided then “Track” is displayed.
When the
button is pushed repeatedly, further
information about the track can be displayed along
with the track title as follows:
CD:
Track time ? Artist ? Song ? Album ? Track time
CD with MP3/WMA:
Track time ? Artist ? Album ? Folder name ? Track
time
Track details:
By pushing and holding the
button, the display
will show a detailed overview and after a few seconds
it will return to the main display. Push the
button
briefly to return to the main display immediately.
CD Eject button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD is loaded,
the CD will be ejected.
When the
button is pushed twice, the CD will be
ejected further, so that the CD can be removed with
ease.
When the ignition switch is in the “OFF” or “LOCK”
position it is possible to eject the CD currently being
played. However the audio unit will not be activated.
If a CD is ejected by pushing the
button, and it is
not removed from the loading slot for some time, the
CD will automatically be reloaded to the slot to protect
the CD.
FM-AM radio operation
GUID-AB44D427-410B-43B3-B55F-23E489713FA7
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
FM/AM buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the / button is pushed while the audio
system is off, the audio system will turn on and the
radio will turn on.
When the
/ button is pushed while another
audio source is playing, the other audio source will turn
off and the radio will turn on.
To change the radio band (FM1, FM2, or AM), push the
/ button.
ENTER dial:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
manually, turn the
dial until the preferred
frequency is achieved.
Fast Forward/Rewind buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
automatically, push the
/ button. When the
system detects a broadcasting station, it will stop at
the station.
*
1
*
2
*
3
*
4
*
5
*
6
(Radio memory) buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
During radio reception, pushing the radio memory
button for less than 2 seconds will select the stored
radio station.
The audio system can store up to 18 FM station
frequencies (six in each of FM 1, FM 2 and FM T) and 6
AM station frequencies.
To store the station frequency manually:
1. Tune to the desired broadcasting station fre-
quency by using the
/ button.
2. Push and hold a radio memory button
*
1
-
*
6
until a beep sounds. (The radio mutes when the
memory button is pushed.)
3. The channel indicator will display and the radio
mute disengages, indicating that the memory is
stored properly.
4. Perform steps 1 - 3 for all other memory buttons.
If the battery cable is disconnected, or if the audio fuse
blows, the radio memory will be erased. If this occurs,
reset the desired stations.
USB memory device operation
GUID-8E460E2D-9E1B-4340-9B6F-53C238229B06
JVH0518X
Monitor, Heater and air conditioner, and audio system 4-41
4-42 Monitor, Heater and air conditioner, and audio system
Audio main operation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The USB outlet connector is located on the instrument
panel. Open the lid and connect a USB memory device
to the connector. The system will switch to the USB
memory device mode automatically.
If the system is turned off while the USB memory
device is playing, pushing the
dial will start the
USB memory device.
If the USB memory device cannot be played, one of the
following messages will be displayed.
. “USB memory device not supported”
. “No audio file detected”
CAUTION:
. Do not force the USB memory device into
the USB port. Inserting the USB memory
device tilted or upside down into the port
may damage the USB memory device and/or
the port. Make sure that the USB memory
device is connected correctly into the USB
port. (Some USB devices come with a
mark as a guide. Make sure that the mark is
facing the correct direction before inserting
the device.)
. Do not place objects near the USB memory
device to prevent the objects from leaning
on the USB memory device and the port.
Pressure from the objects may damage the
USB memory device and/or the port.
AUX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To operate the USB memory device use one of the
following methods:
. Push the
button and then turn the dial to
select the USB item. Once highlighted, push the
dial.
. Push the
button repeatedly until “USB” is
highlighted, and then push the
dial.
Audio main operation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The following operations are identical to the audio main
operation of the Compact Disc (CD) operation. For
details, see “CD player operation” (P.4-40).
. List view
. Quick search
.
. MIX (Random play)
. RPT (Repeat track)
. Folder browsing
DISP button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
While a track with recorded music information tags
(ID3-tags) is being played, the title of the played track
will be displayed. If the tags are not provided, a
notification message will be displayed.
When the
button is pushed repeatedly, further
information about the track can be displayed along
with the track title as follows:
Track time ? Artist ? Album ? Folder name ? Track
time
Track details:
By pushing and holding the
button the display will
show a detailed overview and after a few seconds it
will return to the main display. Push the
button
briefly to return to the main display immediately.
iPod player operation
GUID-64BF1C53-C8 8A-43A7-97CD-7690A141CB38
Connecting iPod:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The USB outlet connector is located in the center
console. Open the USB outlet connector lid and
connect the iPod cable to the USB connector. The
battery of the iPod is charged while the device is
connected to the vehicle.
Depending on the version of the iPod, the display on
the iPod shows a NISSAN or Accessory Attached
screen when the connection is completed. When the
iPod is connected to the vehicle, the iPod music library
can only be operated by the vehicle audio controls.
* iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
CAUTION:
. Do not force the iPod cable into the USB
port. Inserting the iPod cable tilted or upside
down into the port may damage the iPod
cable and the port. Make sure that the iPod
cable is connected correctly into the USB
port. (Some iPod cables come with a
mark as a guide. Make sure that the mark is
facing the correct direction before inserting
the iPod cable.)
. Do not locate objects near the iPod cable to
prevent the objects from leaning on the iPod
cable and th e port. Pressure from the
objects may damage the iPod cable and
the port.
Compatibility:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The following models are supported:
. Third generation iPhone (Firmware version
IOS4/4.0)
. Fourth generation iPhone (Firmware version
IOS4/4.0)
. Fifth generation iPod (Firmware version 1.3)
. First generation iPod Classic (Firmware version
1.1.1 or 1.1.2PC)
. Second generation iPod Classic (Firmware ver-
sion 2.0.1)
. First generatio n iPod touch (Firmware version
1.1.5 or 2.2.1)
. Second and third generation iPod touch (Firm-
ware version 2.2.1 or IOS4/4.0.0)
. First ge neration iPod nano (Firmware version
1.3.1)
. Second generation iPod nano (Firmware version
1.1.3)
. Third generation iPod nano (Firmware version
1.1.2PC or 1.1.3PC)
. Fourth generation iPod nano (Firmware version
1.0.2 or 1.0.4)
. Fifth generation iPod nano (Firmware version 1.0.1
or 1.0.2)
The iPod touch may not respond quickly to the system
in some cases.
Make sure that the iPod firmware is updated.
Operating tips:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
. iPod Shuffle and iPod mini are not supported.
. Some iPod operations may not be available with
this system.
AUX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To operate the iPod use one of the following methods:
. Push the
button and then turn the dial to
select for the USB item. Once highlighted, push
the
dial.
. Push the
button repeatedly until “USB” is
highlighted and then push the
dial.
Audio main operation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Interface:
The interface for iPod operation shown on the audio
system display is similar to the iPod interface. Use the
dial to play a track on the iPod.
The following items can be chosen from the menu list
screen.
. Playlists
. Artists
. Albums
. Tracks
. Genres
For further information about each item, see the iPod
owner’s manual.
The following operations are identical to the audio main
operation of Compact Disc (CD) operation. For details,
see “CD player operation” (P.4-40).
. List view
. Quick search
.
. MIX (Random play)
. RPT (Repeat track)
. Folder browsing
DISP button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
While a track with recorded music information tags
(ID3-tags) is being played, the title of the played track
is displayed. If the tags are not provided then a
notification message is displayed.
When the
button is pushed repeatedly, further
information about the track can be displayed along
with the track title as follows:
Track time ? Artist ? Album ? Folder name ? Track
time
Track details:
By pushing and holding the
button, the display
will show a detailed overview and after a few seconds
it will return to the main display. Push the
button
briefly to return to the main display immediately.
Radio Broadcast data system (RBDS)
GUID-8E4CE6FF-A2A8-41C7-ACC4-BC68BBF79935
The RBDS is a system through which encoded digital
information is transmitted by FM radio stations in
addition to the normal FM radio broadcasting. The
RBDS provides information services such as station
name, traffic information, and news.
NOTE:
In some countries or regions, some of these
services may not be available.
RBDS functions
GUID-5957F70A-94A5-4413-82F4-F656DFBAA01B
Programme Service (PS) function (station name
display function):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When an RBDS station is tuned in with seek or manual
tuning, the RBDS data is received and the PS name is
displayed.
Monitor, Heater and air conditioner, and audio system 4-43
4-44 Monitor, Heater and air conditioner, and audio system
FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (Type F)
GUID-8F59B701-1CED-4805-A0EF-A54AEBCE075C
JVH0508X
1. Day/Night button
2. FM·AM band select button
3. RPT button
4. MIX button
5. Radio memory buttons
6. A-Z button
7. AUX button
8. CD eject button
9. CD button
10. Power/VOL dial
11. Rewind button
12. Fast Forward button
13. DISP button
14. SETUP button
15. Back button
16. TUNE/MENU/ENTER dial
17. Phone button
Audio main operation
GUID-C22EB9A0-95F3-4F43-9647-CAFCF131757E
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
Power/VOL dial:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Power ON/OFF:
To turn on the audio system, push the
dial.
. The system will turn on in the mode, which was
used immediately before the system was turned
off.
. If a CD is inserted or a USB and/or an AUX device
is connected when the system is turned off, and if
the system is turned on again with the devices
removed or disconnected, the radio will turn on.
To turn off the audio system, push the
dial.
Volume control:
To control the volume, turn the
dial.
Turn the
dial clockwise to make the sound louder.
Turn the
dial counterclockwise to make the sound
quieter.
SETUP button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To configure Audio, Clock, Bluetooth, Language or
Scroll direction settings, perform the following proce-
dure:
1. Push the
button.
2. Push the
dial.
3. Turn the
dial clockwise or counterclockwise.
The setting menu will be displayed in the following
order:
Audio Û Clock Û Bluetooth Û Language Û
Scroll Direction
After the desired levels have been set, either push the
button repeatedly, push the button, or wait
for several seconds without pushing any buttons to exit
the menu screen.
Audio adjustments:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button to enter the setup menu screen
and then select “Audio”.
Each time the
dial is pushed, the mode will
change as follows:
BASS ? TREBLE ? BALANCE ? FADE ? AUX
VOL ? SPD VOL ? Audio (setup menu screen) ?
BASS
Turn the
dial clockwise or counterclockwise to
adjust the following items and push the
dial to
confirm.
Bass control:
Use this control to enhance or attenuate the bass
response sound.
Treble control:
Use this control to enhance or attenuate the treble.
Balance control:
Use this control to adjust the balance of the volume
between the left and right speakers.
Fader control:
Use this control to adjust the balance of the volume
between the front and rear speakers (if equipped).
AUX VOL (Auxiliary volume) control:
Use this control to adjust the volume output from the
auxiliary source.
SPD VOL (Speed volume) control:
This mode controls the volume output from the
speakers automatically in relation to vehicle speed.
Adjusting the setting to “0” (zero) turns off the speed
volume feature.
Clock setting:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the dial n to enter the setup menu screen
and then select “Clock”.
Turn the
dial, the mode will change as follows:
Set Time Û ON/OFF Û Clock Format Û Set Time
Set Time:
Select “Set Time” then adjust the clock as follows:
The hour display will start flashing. Turn the
dial to
adjust the hour and push the
dial. The minute
display will start flashing. Turn the
dial to adjust
the minute and push the
dial to finish the clock
adjustment.
ON/OFF:
Set the clock display to on or off when the audio unit is
turned off. If set in the “ON” position, the clock will be
displayed when the audio unit is turned off either by
pushing the
dial or when the ignition switch is
placed in the “OFF” position.
Clock Format:
Switch the clock display between 24-hour and 12-
hour clock mode.
Language setting:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button to enter the setup menu screen
and then select “Language”.
Select the appropriate language and push the
dial. Upon completion, the screen will automatically
adopt the language setting.
Monitor, Heater and air conditioner, and audio system 4-45
4-46 Monitor, Heater and air conditioner, and audio system
Scroll direction:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Set the scrolling behavior of the dial to scroll UP
or DOWN.
Day/Night button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button to switch the display brightness
between the daytime and nighttime modes.
AUX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button to play a compatible device when
it is connected.
CD player operation
GUID-9E3BD738-DF2C-45E8-9081-0EF3477A579D
JVH0509X
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
Loading:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. After loading the CD, the number of
tracks and the playtime will appear on the display.
CAUTION:
Do not force the CD into the slot. This could
damage the player.
NOTE:
. The CD player accepts normal audio CDs or
CDs containing MP3/WMA files.
. The audio unit will automatically detect if a
CD containing MP3/WMA files is inserted,
and [MP3CD] will be indicated.
. An error notification message will be dis-
played when an incompatible disc (e.g. DVD)
is inserted, or if the player cannot read the
CD. Eject the disc and insert another disc.
List view:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
While the track is being played, push either the
dial or the button to display the available tracks in
a listed view mode. Turn the
dial to select a track
from the list, or a track to start listening to, and then
push the
dial.
Quick search:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
In the list view mode, a quick search can be performed
to find a track from the list. Push the
button, turn
the
dial to the first alphabetic letter of the song
title and then push the
dial. When found, a list of
the available songs will be displayed. Select, and push
the
dial to play the preferred track.
CD button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while the audio
system is turned off and a CD is loaded, the audio
syste m will turn on and a CD will start playing
automatically. If the radio or AUX source mode is
already playing, it will automatically turn off and the CD
will start playing.
However, if the CD is not loaded, then a notification
message will be displayed and the audio unit will
remain in the radio or AUX source mode.
Fast Forward/Rewind buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push and hold the / buttons to fast forward
or rewind through the track. When the button is
released, the track will play at normal playing speed.
Track up/down:
By pushing the
/ buttons once, the track will
skip forward to the next track or backward to the
beginning of the current track. Push the
/
buttons more than once to skip through the tracks.
Folder browsing:
If the recorded media contains folders with music files,
pushing the
/ button will play the tracks of
each folder in sequence.
To select a preferred folder:
1. Push the
dial or the button and a list of
tracks in the current folder is displayed.
2. Push the
button.
3. Turn the
dial to highlight the preferred folder.
4. Push the
dial to access the folder. Push the
dial again to start playing the first track or
turn the
dial, and push the dial to select
another track.
If the current selected folder contains sub folders, push
the
dial, and a new screen with a list of sub
folders will be displayed. Turn the
dial to highlight
the sub folder then push the
dial to access the
sub-folder. Select the root folder item when songs are
recorded additionally in the root folder.
To return to the previous folder screen, push the
button.
RPT button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button and the current track will be
played continuously.
MIX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button and all the tracks will be played in
random order.
DISP button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
While a CD with recorded music information tags (CD-
text/ID3-text tags) is being played, the title of the
played track is displayed. If the title information is not
provided then “Track” is displayed.
When the
button is pushed repeatedly, further
information about the track can be displayed along
with the track title as follows:
CD:
Track time ? Artist ? Song ? Album ? Track time
CD with MP3/WMA:
Track time ? Artist ? Album ? Folder name ? Track
time
Track details:
By pushing and holding the
button will turn the
display will show a detailed overview and after a few
seconds will return to the main display. Push the
button to return to the main display immediately.
CD Eject button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD is loaded,
the CD will be ejected.
When the
button is pushed twice, the CD will be
ejected further, so that the CD can be removed with
ease.
When the ignition switch is in the “OFF” or “LOCK”
position it is possible to eject the CD currently being
played. However the audio unit will not be activated.
If a CD is ejected by pushing the
button, and it is
not removed from the loading slot for some time, the
CD will automatically be reloaded to the slot to protect
the CD.
FM-AM radio operation
GUID-1D5EBA5D-8833-4228-9AA7-EAA84E0CC287
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
FM·AM button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while the audio
system is turned off, the audio system will turn on and
the radio will turn on.
When the
button is pushed while another audio
source is playing, the other audio source will turn off
and the radio will turn on.
To change the radio band, push the
button until
the desired band appears.
FM 1 ? FM 2 ? FM T ? AM ? FM 1
During FM reception, when the
button is pushed
for longer than 1.5 seconds, stations are searched for
and the 6 stations of the FM T band are tuned in.
During the search, the notification message “AUTO-
STORE” appears in the display and the sound is muted
until the autostore operation is completed, upon which
preset channel 1 is automatically tuned in.
ENTER dial:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
manually, turn the
dial until the preferred
frequency is achieved.
The frequency changes in steps of 100 kHz on the FM
band and 9 kHz on the AM band.
Fast Forward/Rewind buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
automatically, push the
/ button. When the
system detects a broadcasting station, it will stop at
the station.
*
1
*
2
*
3
*
4
*
5
*
6
(Radio memory) buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
During radio reception, pushing the radio memory
button for less than 2 seconds will select the stored
radio station.
The audio system can store up to 18 FM station
frequencies (six in each of FM 1, FM 2 and FM T) and 6
AM station frequencies.
To store the station frequency manually:
1. Tune to the desired broadcasting station fre-
quency by using the
/ button.
2. Push and hold a radio memory button
*
1
-
*
6
until a beep sounds. (The radio mutes when the
memory button is pushed.)
3. The channel indicator will display and the radio
mute disengages, indicating that the memory is
stored properly.
4. Perform steps 1 - 3 for all other memory buttons.
If the battery cable is disconnected, or if the audio fuse
blows, the radio memory will be erased. If this occurs,
Monitor, Heater and air conditioner, and audio system 4-47
4-48 Monitor, Heater and air conditioner, and audio system
reset the desired stations.
USB memory device operation
GUID-9D1BEADF-3B18-4472-816C-1DE672CA4456
JVH0518X
Audio main operation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The USB outlet connector is located on the instrument
panel. Open the lid and connect a USB memory device
into the connector. The system will switch to the USB
memory device mode automatically.
If the system is turned off while the USB memory
device is playing, pushing the
dial will start the
USB memory device.
If the USB memory device cannot be played, one of the
following messages will be displayed.
. “USB memory device not supported”
. “No audio file detected”
CAUTION:
. Do not force the USB memory device into
the USB port. Inserting the USB memory
device tilted or upside down into the port
may damage the USB memory device and/or
the port. Make sure that the USB memory
device is connected correctly into the USB
port. (Some USB devices come with a
mark as a guide. Make sure that the mark is
facing the correct direction before inserting
the device.)
. Do not place objects near the USB memory
device to prevent the objects from leaning
on the USB memory device and the port.
Pressure from the objects may damage the
USB memory device and/or the port.
AUX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To operate the USB memory device use one of the
following methods:
. Push the
button then turn the dial to
select the USB item. Once highlighted, push the
dial.
. Push the
button repeatedly until USB is
highlighted, and then push the
dial.
Audio main operation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The following operations are identical to the audio main
operation of the Compact Disc (CD) operation. For
details, see “CD player operation” (P.4-46).
. List view
. Quick search
.
. MIX (Random play)
. RPT (Repeat track)
. Folder browsing
DISP button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
While a track with recorded music information tags
(ID3-tags) is being played, the title of the played track
is displayed. If the tags are not provided, a notification
message is displayed.
When the
button is pushed repeatedly, further
information about the track can be displayed along
with the track title as follows:
Track time ? Artist ? Album ? Folder name ? Track
time
Track details:
By pushing and holding the
button the display will
show a detailed overview and after a few seconds it
will return to the main display. Push the
button
briefly to return to the main display immediately.
iPod player operation
GUID-FD81A5CF-6AA5-4626-B051-70BF7A4038A1
Connecting iPod:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The USB outlet connector is located in the center
console. Open the USB outlet connector lid and
connect the iPod cable to the USB connector. The
battery of the iPod is charged while the device is
connected to the vehicle.
Depending on the version of the iPod, the display on
the iPod shows a NISSAN or Accessory Attached
screen when the connection is completed. When the
iPod is connected to the vehicle, the iPod music library
can only be operated by the vehicle audio controls.
* iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries.
CAUTION:
. Do not force the iPod cable into the USB
port. Inserting the iPod cable tilted or up-
side-down into the port may damage the
iPod cable and the port. Make sure that the
iPod cable is connected correctly into the
USB port. (Some iPod cables come with a
mark as a guide. Make sure that the
mark is facing the correct direction before
inserting the iPod cable.)
. Do not locate objects near the iPod cable to
prevent the objects from leaning on the iPod
cable and th e port. Pressure from the
objects may damage the iPod cable and
the port.
Compatibility:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The following models are supported:
. Third generation iPhone (Firmware version
IOS4/4.0)
. Fourth generation iPhone (Firmware version
IOS4/4.0)
. Fifth generation iPod (Firmware version 1.3)
. First generation iPod Classic (Firmware version
1.1.1 or 1.1.2PC)
. Second generation iPod Classic (Firmware ver-
sion 2.0.1)
. First generatio n iPod touch (Firmware version
1.1.5 or 2.2.1)
. Second and third generation iPod touch (Firm-
ware version 2.2.1 or IOS4/4.0.0)
. First ge neration iPod nano (Firmware version
1.3.1)
. Second generation iPod nano (Firmware version
1.1.3)
. Third generation iPod nano (Firmware version
1.1.2PC or 1.1.3PC)
. Fourth generation iPod nano (Firmware version
1.0.2 or 1.0.4)
. Fifth generation iPod nano (Firmware version 1.0.1
or 1.0.2)
The iPod touch may not respond quickly to the system
in some cases.
Make sure that the iPod firmware is updated.
Operating tips:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
. iPod Shuffle and iPod mini are not supported.
. Some iPod operations may not be available with
this system.
AUX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To operate the iPod use one of the following methods:
. Push the
button and then turn the dial
for the USB item. Once highlighted, push the
dial.
. Push the
button repeatedly until USB is
highlighted and then push the
dial.
Audio main operation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Interface:
The interface for iPod operation shown on the audio
system display is similar to the iPod interface. Use the
dial to play a track on the iPod.
The following items can be chosen from the menu list
screen.
. Playlists
. Artists
. Albums
. Tracks
. Genres
For further information about each item, see the iPod
owner’s manual.
The following operations are identical to the audio main
operation of the Compact Disc (CD) operation. For
details, see “CD player operation” (P.4-46).
. List view
. Quick search
.
. MIX (Random play)
. RPT (Repeat track)
. Folder browsing
DISP button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
While a track with recorded music information tags
(ID3-tags) is being played, the title of the played track
is displayed. If the tags are not provided then a
notification message is displayed.
When the
button is pushed repeatedly, further
information about the track can be displayed along
with the track title as follows:
Track time ? Artist ? Album ? Folder name ? Track
time
Track details:
By pushing and holding the
button the display will
show a detailed overview and after a few seconds it
will return to the main display. Push the
button
briefly to return to the main display immediately.
Bluetooth
®
audio player operation
GUID-32CAE781-FBA5-47D3-9B53-71EB8C92DC09
Regulatory information:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Bluetooth
®
is a trademark owned
by Bluetooth SIG, Inc., and
licensed to Daewoo IS Corp.
CE statement:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Hereby Daewoo IS Corp. declares that this system is
in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.
NSY0105
Monitor, Heater and air conditioner, and audio system 4-49
4-50 Monitor, Heater and air conditioner, and audio system
NOTE:
The audio system only supports Bluetooth
®
devices with AVRCP (Audio Video Remote Con-
trol Profile) version 1.3, 1.0, or earlier.
Bluetooth
®
audio player setting:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To set up the Bluetooth
®
system with your preferred
device, push the
button and select Bluetooth
®
,
and then push the
dial or alternatively, push the
button. The following items are available:
. Pair Device
Bluetooth
®
devices can be paired with the system.
A maximum of 5 devices can be registered.
. Select Device
Paired Bluetooth
®
devices are listed and can be
selected for connection.
. Delete Device
A registered Bluetooth
®
device can be deleted.
. On/Off
If this setting is turned off, the connection between
the Bluetooth
®
devices and the in-vehicle Blue-
tooth
®
module will be cancelled.
NOS2761
Pair Device:
1. Push the
button. Select the Bluetooth
®
key
by turning the
dial, and then push the
dial.
You can register up to 5 different Bluetooth
®
audio/cellular phone devices. However, you can
only use one device at a time. If you have 5
different Bluetooth
®
devices, a newly registered
device can only replace one of the already
registered 5 existing paired devices. Use the
“Delete Device” key to delete one of the existing
paired devices.
2. Select the “Pair Device” key.
The pairing procedure depends on the connected
device:
.
Cellular phone:
The message Ready to Pair Pin:1234 will be
displayed.
.
Audio device without PIN code:
The Bluetooth
®
connection will be automati-
cally connected without any further input.
.
Audio device with PIN code:
A new screen will appear. Assign the 4 digit
PIN code by turning the
dial to each digit
of the code and pushing the
dial to
confirm each digit. After the PIN code is input,
select “Validate” and push the
dial. The
Bluetooth
®
connection will be made.
The 4-digit PIN code is provided with the audio
device, see the owner’s manual of the audio
device.
3. On Bluetooth
®
audio/cellular phone devices:
a. Check that Bluetooth
®
is turned on, on your
device.
b. Switch to the search mode for Bluetooth
®
devices. If the search mode finds a device it
will be shown on the device display. Select My
Car.
c. Enter the number code shown on the relevant
device with the device’s own keypad, and push
the confirmation key on the device itself. Refer
to the relevant Bluetooth
®
device owner’s
manual for further details.
When the device is successfully paired a notification
message will be displayed, and then the audio system
display will return to the current audio source display.
During connection the following status icons will be
displayed (top left of the display): Signal strength
(
), Battery status* ( ) and Bluetooth
®
“ON”
(
).
*: If the low battery message comes on, the Bluetooth
®
device must be recharged soon.
The pairing procedure and operation may vary
according to device type and compatibility. See the
owner’s manual of the Bluetooth
®
device for further
details.
Select Device:
The paired device list shows which Bluetooth
®
audio
or cellular phone devices have been paired or
registered with the Bluetooth
®
audio system. If the list
contains devices, select the appropriate device to
connect to the Bluetooth
®
audio system.
The following symbols indicate the capability of the
registered device:
.
: cellular phone integration
.
: Audio streaming (A2DP- Advanced Audio
Distribution Profile)
Delete Device:
A registered device can be removed from the Blue-
tooth
®
audio system. Select a registered device then
push the
button to confirm deletion.
On/Off:
If Bluetooth
®
has been switched off, a notification
message On/Off appears when you select Bluetooth
®
from the setup menu screen, or push the button.
To turn the Bluetooth
®
signal on, push the dial
and a follow up screen will appear. Select “On” and
push the
dial to display the Bluetooth
®
settings
menu screen.
Bluetooth
®
audio streaming main operation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
NOS2762
Turn the ignition switch to the “ACC” or “ON” position.
If the audio system is turned off while the Bluetooth
®
audio is playing, pushing the dial will start
Bluetooth
®
audio streaming.
AUX button:
To operate Bluetooth
®
audio streaming use one of the
following methods:
. Push the
button, then turn the dial to
highlight BT Audio, and push the
dial.
. Push
repeatedly until BT Audio is highlighted,
then push the
dial.
The type of display,
*
A
or
*
B
, shown on the audio
system can vary depending on the Bluetooth
®
version
of the device.
Fast Forward/Rewind buttons:
Fast Forward, Fast Reverse:
When the
/ button is pushed continuously,
the track will be played at high speed. When the button
is released, the track will be played at normal playing
speed.
Track up/down:
By pushing the
/ button once, the track will
be skipped forward to the next track or backward to
the beginning of the current played track. Push the
/ button more than once to skip through the
tracks.
DISP button:
If the song contains music information tags (ID3-tags),
the title of the played song will be displayed. If tags are
not provided, the display will not show any messages.
When the
button is pushed repeatedly, further
information about the song can be displayed along
with the song title.
By pushing and holding the
button the display will
show a detailed overview which after a few seconds
will return to the main display. Push the
button
briefly to return to the main display immediately.
Radio Broadcast data system (RBDS)
GUID-6A4AA979-71C4-4 7F1-AF38-B21D4FDD2FF2
The RBDS is a system through which encoded digital
information is transmitted by FM radio stations in
addition to the normal FM radio broadcasting. The
RBDS provides information services such as station
name, traffic information, and news.
NOTE:
In some countries or regions, some of these
services may not be available.
Alternative Frequency (AF) mode:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The AF mode operates in the FM (radio) mode.
. The AF mode operates both in the FM (radio) and
CD mode (if FM was previously selected in the
radio mode).
. The AF function compares signal strengths and
selects the station with the optimum reception
conditions for the currently tuned-in station.
RBDS functions
GUID-4076D2F6-957E-4D0C-93F3-6A860E217BF1
Programme Service (PS) function (station name
display function):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When an RBDS station is tuned in with seek or manual
tuning, the RBDS data is received and the PS name is
displayed.
Monitor, Heater and air conditioner, and audio system 4-51
4-52 Monitor, Heater and air conditioner, and audio system
LW-MW-FM RADIO WITH COMPACT DISC (CD) PLAYER
GUID-6A9CD14F-B6E3-4056-B506-430C33ADFEBB
SAA2379
1. MUTE button
2. POWER ON/OFF button
3. Sound preference button
4. FM band select button
5. AM band select button
6. Radio memory buttons
7. CD button
8. AUX button
9. TA (Traffic Announcement) button
10. MENU button
11. CD EJECT button
12. SEEK/TRACK button
13. MIX (Mix play) button
14. RPT (Repeat) button
15. VOLUME control/MENU select dial
16. ENTER button
17. AUX IN (auxiliary input) jack
18. NEWS button
19. TUNE/SEARCH button
Anti-theft system (if equipped)
GUID-0B1806B3-B3F3-454E-96F7-F01E3B55322A
This unit can only be activated when the ignition switch
for NATS is in the “ACC” or “ON” position.
Each radio is uniquely match ed to the vehicle’s
immobilizer and therefore cannot be transferred to
any other vehicle.
Audio main operation
GUID-0F37ACCE-50E0-4C87-94A7-2BA1849C6F2D
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
POWER ON/OFF button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To turn on the audio system, push the POWER ON/
OFF button.
. The system will turn on in the mode, (radio or CD)
which was used immediately before the system
was last turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the POWER ON/
OFF button.
Volume control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To control the volume, turn the VOLUME control dial.
Turn the VOLUME control dial clockwise to increase
the audio volume.
Turn the VOLUME control dial counterclockwise to
decrease the audio volume.
Sound preference button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To enter the audio mode (radio or CD), push the
button.
To change the audio settings (BASS, TREBLE, FADE,
BALANCE, EQ), push the
button or ENTER
button to select the mode.
BASS ? TREBLE ? BALANCE ? FADE ? EQ ?
BASS
To adjust each audio setting, turn the MENU/VOL
control dial clockwise or counterclockwise.
BASS: (−) to decrease / (+) to increase
TREB(LE): (−) to decrease / (+) to increase
BAL(ANCE): (R) to adjust to the right / (L) to adjust to
the left
FADE(R): (F) to adjust to the front / (R) to adjust to the
rear
EQ (Equalizer): Use this control to change the preset
sound mode for CD play.
Turn the MENU/VOL dial clockwise or counterclock-
wise. The mode will change as follows:
OFF Û ENHANCE Û OFF
If the audio settings mode is unchanged for approxi-
mately 5 seconds, the audio settings mode will
automatically return to the normal mode.
Clock display:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Turning on/off the clock display
To turn on or off the clock display, perform the
following operations.
1. Push the MENU button while the audio system is
on.
2. Turn the VOLUME control dial until "CLOCK"
appears on the display.
3. Push the ENTER bu tton. ("CLOCK OFF" or
"CLOCK ON" is displayed.)
4. To turn on the clock display, turn the VOLUME
control dial till "CLOCK ON" is displayed. To turn
off the clock display, turn the VOLUME control dial
till "CLOCK OFF" is displayed, and push ENTER.
Clock adjustment
To adjust the time of the clock, perform the following
operations.
1. Push the ENTER button while "CLOCK ON" is
displayed.
2. The hour display will flash.
3. Turn the VOLUME control dial to adjust the hour.
4. Push the ENTER button. The minute display will
flash.
5. Turn the VOLUME control dial to adjust the
minute.
6. Push the ENTER button to complete the clock
adjustment.
Mute button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the MUTE button to mute the audio system.
MUTE appears on the display. To unmute, use any one
of the following options:
. Push the MUTE button again.
. Turn the VOLUME control dial.
. Push the CD, FM or AM button.
. Push the AUX button.
AUX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The AUX IN jack is located on the audio unit. The AUX
IN audio input jack accepts any standard analog audio
input such as from a portable cassette tape player, CD
player, MP3 player or laptop computer.
Push the AUX button to play a compatible device when
it is plugged into the AUX IN jack.
NISSAN strongly recommends using a stereo mini
plug cable when connecting your music device to the
audio system. Music may not play properly when a
Monitor, Heater and air conditioner, and audio system 4-53
4-54 Monitor, Heater and air conditioner, and audio system
monaural cable is used.
CD player operation
GUID-108C6D9A-02FF-45FA-9BBC-73B6407DEA62
SAA2380
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
Loading:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Insert a CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. If the radio is already playing, it will
automatically turn off, and the CD will start playing.
CAUTION:
Do not force the CD into the slot. This could
damage the player.
After loading the CD, the number of tracks and the
playtime will appear on the display.
CD button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while the audio
system is off and a CD is loaded, the audio system will
turn on and a CD will start playing automatically. If the
radio is already playing, it will automatically turn off and
the CD will start playing.
/ FF (Fast Forward), REW (Rewind)
button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push and hold the FF or REW button while a CD is
being played to fast-forward or rewind though the
track. When the button is released, the CD will return
to the normal play speed.
/ TRACK UP/ DOWN button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the track up button while a CD is being played to
skip forward to the next track. The CD will advance the
number of times the button is pushed. When the last
track of the CD is skipped, the first track will be played.
Push the track down button while a CD is being played
to start the present track again from the beginning.
Push the track down button several times to skip back
to the previous track. The CD will skip tracks backward
the number of times the button is pushed. When the
first track of the CD is skipped, the last track will be
played.
Repeat button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button repeatedly to change the play
mode as follows:
RPT (REPEAT) TRACK ? RPT (REPEAT) ALL ? RPT
(REPEAT) TRACK
RPT TRACK:
The selected track will be played repeatedly.
RPT ALL:
All the tracks on the CD will be played in sequential
order.
MIX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button repeatedly to change the play
mode as follows:
MIX DISC ? RPT (REPEAT) ALL ? MIX DISC
MIX DISC:
All the tracks on the CD will be played in a random
order.
RPT ALL:
All the tracks on the CD will be played in sequential
order.
CD EJECT button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while a CD is loaded,
the CD will be ejected.
When the
button is pushed twice, the CD will be
ejected further, and the CD can be removed easily.
If a CD is ejected by pushing the
button, and it is
not taken out from the loading slot, the CD will
automatically be reloaded to the slot to protect the CD.
LW-MW-FM radio operation
GUID-26B351F1-BF06-4FF6-8B60-4538B0FEB6F4
SAA2380
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
FM-AM button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the / button is pushed while the audio
system is off, the audio system and the radio will turn
on. When the
/ button is pushed while the CD
player is already operating, it will automatically turn off
and the radio will turn on.
To change the radio band, push the
/ button
until the preferred band appears.
. For FM
FM 1 ? FM 2 ? FM T
. For AM
MW ? LW ? MW
During FM reception, when the
button is pushed
for longer than 1.5 seconds, stations are searched for
and the 6 stations of the FM T band. The sound is
muted until the auto store operation is completed,
upon which preset channel 1 is automatically tuned in.
TUNE button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
manually, push the
or button until the
preferred frequency is obtained.
The frequency changes in steps of 100 kHz on the FM
band, 9 kHz on the MW band, and 3 kHz on the LW
band.
SEEK button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
automatically, push the
or button. When the
system detects a broadcasting station, it will stop at
that station.
*
1
*
2
*
3
*
4
*
5
*
6
Radio memory buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The audio system can store up to 18 FM station
frequencies (six in each of FM 1, FM 2 and FM T), 6
MW and 6 LW station frequencies.
To store the station frequency manually:
1. Tune to the preferred broadcasting station fre-
quency by using the
or
button.
2. Push and hold a radio memory button
*
1
-
*
6
until a beep sounds. (The radio mutes when the
memory button is pushed.)
3. The channel indicator will be displayed and the
radio mute will be cancelled, indicating that the
memory is stored properly.
4. Perform steps 1 - 3 for all other memory buttons.
If the battery cable is disconnected, or if the audio fuse
blows, the radio memory will be erased. If this occurs,
reset the desired stations.
Radio data system (RDS)
GUID-237F0783-B830-4397-9033-EF65999545BA
Alternative Frequency (AF):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
. The AF function operates in the FM (radio) and CD
modes.
. When the AF mode is set to “ON” in the user
setup menu mode, the AF indicator illuminates.
For activation or deactivation, use the MENU button.
(Details are explained later in this section.)
. Automatic switching function
This function compares the strengths of the
signals of all the stations on the AF list and
selects the station with the optimum reception
conditions.
. Program Information (PI) search
Program Information (PI) search begins automati-
cally if no suitable station is found with the above
automatic switching function. The PI search
function checks each RDS station with the same
PI code. During this time the sound is muted and
“PI SEARCH” is displayed. The PI search opera-
tion stops when a suitable station is found. If no
station is found once all the frequencies have been
searched, the radio retur ns to the previous
frequency.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
When EON data is being received, this enables
automatic retuning of other preset stations on the
same network. Also, network linked services can
be used. The EON indicator turns on during
reception of RDS EON stations in the FM mode.
RDS functions:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
. Programme Service (PS) function (station
name display function)
When an RDS station is tuned in with seek or
manual tuning, RDS data is received and the
Program Service (PS) name is displayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION — EBU SPEC FOR
INFO)
When the radio receives PTY code 31 (an
emergency broadcast code), the sound is inter-
rupted, the emergency broadcast is heard, and
“PTY31 ALARM” is displayed. The volume level at
this time is the same as that for traffic announce-
ments. Once the emergency broadcast is finished,
the unit immediately returns to the previous
source.
. REG (Regional) mode
Some local radio stations are linked together
Monitor, Heater and air conditioner, and audio system 4-55
4-56 Monitor, Heater and air conditioner, and audio system
according to their region because they only offer
limited coverage due to their limited number of
transmitters. If the signal from one station be-
comes weak while you are driving around, RDS
mode will switch to another local station in the
region with a stronger signal.
When the REG mode is activated in the FM band
and the radio receiver is tuned to a local radio
station, it will keep receiving this radio station
without switching to another local station. For
activation or deactivation, use the MENU button.
(Details are explained later in this section.)
Traffic Announcement (TA):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
. The TA function operates in the FM and CD
modes.
. The TA mode is turned on or off when the TA
button is pushed for less than 2 seconds.
. The TA mode operates regardless of whether the
AF mode is on or off.
. “TA ON” is displayed when the TA mode is turned
on, and the TA indicator turns on. “TA OFF” is
displayed when the TA mode is turned off, and the
TA indicator turns off.
The following function operates when the TA mode is
on:
. Traffic announcement interrupt function
When a traffic announcement is received, the
announcement is t uned in and the volume
increases to the set level.
Once the traffic announcement is finished, the unit
returns to the source which was set before the
traffic announcement started, and the volume
returns to the previous level. For EON stations,
the radio is interrupted by another EON station
with traffic announcements.
The traffic announcement interrupt mode is
cancelled if the TA button is pushed during a
traffic announcement. The TA mode returns to the
standby mode and the audio unit returns to the
previous source.
News mode:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the NEWS button is pushed for longer than 2
seconds in the FM mode, the news func tion is
activated. “NEWS” is displayed for 3 seconds and
the NEWS indicator appears on the display.
When the news function is activated, the radio
receives a news code from the FM broadcasting news
station and the play mode will be interrupted. Once the
news broadcast is finished, the unit returns to the
previous mode.
In some countries or regions, this serv i c e is n ot
available or the signal is too weak to be received.
1. News standby mode
.
The news standby mode can be activated in
the FM or CD mode.
.
A news interruption will be announced and
“NEWS” will be displayed when the radio
detects the news code from the tuned station
or EON stations. The display will then change
to the PS name of the interrupting station.
.
When pushing the NEWS button for longer
than 2 seconds, the news standby mode is
turned off and the indicator disappears from
the display.
2. News interruption mode
.
When the NEWS button is pushed during the
news interruption mode, the radio returns to the
previous source. However, the news standby
mode is maintained.
.
When the
button is pushed during the
news interruption mode, the radio changes to
the CD mode. However, the news standby
mode is maintained.
If the radio band is changed to the MW or LW,
the news standby mode will be turned off.
MENU button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To confi gure Alternative Frequ ency, Regional and
Language settings, perform the following procedure:
1. Push and hold the MENU button for at least 1.5
seconds.
2. Turn the VOLUME control dial clockwise or
counterclockw ise. The display message will
change as follows:
AF Û REG Û LANGUAGE Û AF
. To activate or deactivate the AF and REG mode,
briefly push the ENTER button when AF or REG
appears on the display and turn the VOLUME
control dial clockwis e or countercl ockwise to
switch between the off or on position. After
selection, push the ENTER button to confirm the
settings.
— When the AF mode is enabled, the audio unit
will automatically re-tune to a stronger fre-
quency if the radio signal becomes weak.
— When the REG mode is enabled, the audio unit
will maintain and maintain the station which is
broadcasting local (regional) programmes.
. To change the display language, briefly push the
ENTER button when LANGUAGE appears on the
display then turn the MENU/VOL dial clockwise or
counterclockwise to select the appropriate lan-
guage setting.
ENGLISH Û DUTCH Û FRENCH Û SPANISH
Û GERMAN Û ITALIAN Û PORTUGUESE Û
ENGLISH
After selecting the preferred language, push the
ENTER button to exit the menu.
To configure the SPEED volume and BEEP settings,
perform the following procedure:
1. Push the MENU button.
2. Turn the Volume control dial clockwise or counter-
clockwise. The display message will change as
follows:
SPEED VOL Û CLOCK Û BEEP
. When SPEED VOL appears on the display, briefly
push the ENTER button then turn the VOLUME
control dial clockwis e or countercl ockwise to
adjust the level of the volume.
Adjusting the setting to 0 (zero) turns off the
speed volume feature . Increasing the speed
volume setting results in the audio volume
increasing more rapidly with vehicle speed. Push
the ENTER button again to save the setting.
. When BEEP appears on the display, briefly push
the ENTER button and then turn the VOLUME
control dial clockwis e or countercl ockwise to
switch the beep sound on or off. Push the ENTER
button again to save the setting.
After the preferred levels have been set, push the
MENU button to exit the menu or wait at least for 10
seconds without pressing any buttons.
For clock adjustments, see “Audio main operation”
(P.4-53).
LW-MW-FM RADIO WITH COMPACT DISC (CD) CHANGER
GUID-09378FC5-F692- 4F38-920E-B917215D1033
JVH0044X
1. CD LOAD button
2. POWER ON/OFF button
3. PHONE SEND button
4. TA (Traffic Announcement)/NEWS button
5. Radio band select button
6. Radio memory/CD select buttons
7. CD button
8. AUX button
9. Sound preference button
10. MENU button
11. CD EJECT button
12. SEEK/TRACK button
13. PHONE BOOK button
14. PHONE END/BACK button
15. VOLUME control/MENU select knob
16. ENTER button
Monitor, Heater and air conditioner, and audio system 4-57
4-58 Monitor, Heater and air conditioner, and audio system
17. AUX IN (auxiliary input) jack
18. RPT (Repeat)/MIX (Mix play) button
19. TUNE/SEARCH button
Anti-theft system (if equipped)
GUID-8F9676CC-8B9A-4A00-AA79-2C6C23138E02
This unit can only be activated when the ignition switch
for NATS is in the “ACC” or “ON” position.
Each radio is uniquely match ed to the vehicle’s
immobilizer and therefore cannot be transferred to
any other vehicle.
Audio main operation
GUID-1FB203B0-2837-457B-A593-36D3628B1DB7
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
POWER ON/OFF button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To turn on the audio system, push the POWER ON/
OFF button.
. The system will turn on in the mode, (radio or CD)
which was used immediately before the system
was last turned off.
. If there is no CD loaded, the radio will be turned
on.
To turn off the audio system, push the POWER ON/
OFF button.
Volume control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To control the volume, turn the VOLUME control dial.
Turn the VOLUME control dial clockwise to increase
the audio volume.
Turn the VOLUME control dial counterclockwise to
decrease the audio volume.
Sound preference button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To enter the audio mode (radio or CD), push the
button. When no CD is loaded, the audio system will
automatically switch to the radio mode.
To change the audio settings (BASS, TREBLE,
FADER, BALANCE, EQ), push the
button or
ENTER button to select the mode.
BASS ? TREBLE ? BALANCE ? FADER ? EQ ?
BASS
To adjust each audio setting, turn the MENU/VOL
control dial clockwise or counterclockwise.
BASS: (−) to decrease / (+) to increase
TREB(LE): (−) to decrease / (+) to increase
BAL(ANCE): (R) to adjust to the right / (L) to adjust to
the left
FADE(R): (F) to adjust to the front / (R) to adjust to the
rear
EQ (Equalizer): Use this control to change the preset
sound mode for CD play.
Turn the MENU/VOL dial clockwise or counterclock-
wise. The mode will change as follows:
OFF Û ENHANCE Û OFF
If the audio settings mode is unchanged for approxi-
mately 8 seconds, the audio settings mode will
automatically return to the normal mode.
Clock display:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Turning on/off the clock display
To turn on or off the clock display, perform the
following operations.
1. Push the MENU button while the audio system is
on. ("PHONE SETUP" is displayed.)
2. Turn the VOLUME control knob until "CLOCK"
appears on the display.
3. Push the ENTER bu tton. ("CLOCK OFF" or
"CLOCK ON" is displayed.)
4. To turn on the clock display, turn the VOLUME
control knob till "CLOCK ON" is displayed. To turn
off the clock display, turn the VOLUME control
knob till "CLOCK OFF" is displayed, and push
ENTER.
Clock adjustment
To adjust the time of the clock, perform the following
operations.
1. Push the ENTER button while "CLOCK ON" is
displayed.
2. The hour display will flash.
3. Turn the VOLUME control knob to adjust the hour.
4. Push the ENTER button. The minute display will
flash.
5. Turn the VOLUME control knob to adjust the
minute.
6. Push the ENTER button to complete the clock
adjustment.
AUX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The AUX IN jack is located on the audio unit. The AUX
IN audio input jack accepts any standard analog audio
input such as from a portable cassette tape player, CD
player, MP3 player or laptop computer.
Push the AUX button to play a compatible device when
it is plugged into the AUX IN jack.
NISSAN strongly recommends using a stereo mini
plug cable when connecting your music device to the
audio system. Music may not play properly when a
monaural cable is used.
CD changer operation
GUID-5C006A55-5D29-458D-B6B9-80DFFF96E98A
JVH0045X
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
CD LOAD button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed, the CD loading slot
will open and the loading position will be displayed.
Insert the CD into the slot with the label side facing up.
The CD will be guided automatically into the slot and
will start playing. If the radio is already playing, it will
automatically turn off and the CD will start playing.
CAUTION:
. Do not force the compact disc into the slot.
This could damage the player.
. Do not use 8 cm (3.1 in) discs.
After loading the CD, the slot number and CD track will
appear on the display.
To load a CD in the CD changer:
1. Push the
button for less than 1.5 seconds.
2. Select the loading slot by pushing the CD select
button. If no slot is selected, the CD changer will
automatically select an available slot.
3. Insert the CD into the slot.
To load 6 CDs in the CD changer:
1. Push the
button for more than 1.5 seconds.
2. Insert a CD into the slot.
3. When the next loading slot number illuminates on
the display, insert the next CD into the slot.
To load 6 CDs in the CD changer:
1. Push the
button for more than 1.5 seconds.
2. Insert the CD into the slot.
3. When the next loading slot number illuminates on
the display, insert the next CD into the slot.
The slot number indicator appears on the display when
the CDs are loaded in the CD changer and the audio
system is turned on.
CD PLAY button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while the audio
system is off and CDs are loaded, the audio system will
turn on and the CD will start to play automatically. If the
radio is already operating, it will automatically turn off
and the CD will start playing.
FF (Fast Forward), REW (Rewind)
button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the (fast forward) or (rewind) button
while a CD is being played to fast-forward or rewind
through the track. When the button is released, the CD
will return to normal play speed.
TRACK UP/ DOWN button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button while a CD is being played to
skip forward to the next track. The CD will skip tracks
forward the number of times the button is pushed.
When the last track of the CD is skipped, the first track
will be played.
Push the
button while a CD is being played to
start the present track again from the beginning. Push
the
button several times to skip back to the
previous track. The CD will skip tracks backward the
number of times the button is pushed. When the first
track of the CD is skipped, the last track will be played.
*
1
*
2
*
3
*
4
*
5
*
6
CD select buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To change to another CD loaded in the CD changer,
push the corresponding CD select button. When a CD
is selected, the selected CD will be automatically
played from the first track.
RPT (Repeat)·MIX button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the button repeatedly to change the play
mode as follows:
RPT (REPEAT) TRACK ? RPT (REPEAT) DISC ?
MIX DISC ? MIX ALL ? RPT (REPEAT) ALL ? RPT
(REPEAT) TRACK
RPT TRACK:
The CD changer plays the current track con-
tinuously.
RPT DISC:
The CD changer repeats the disc currently being
playing.
MIX ALL:
Monitor, Heater and air conditioner, and audio system 4-59
4-60 Monitor, Heater and air conditioner, and audio system
All the tracks on all of the CDs will be played in a
random order.
MIX DISC:
The CD changer plays all the tracks from one
disc once in a random order.
RPT ALL:
All the tracks of all the CDs will be played
continuously in sequential order.
CD EJECT button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed for less than 1.5
seconds while CDs are loaded, the previously played
CD will be ejected.
When the
button is pushed for less than 1.5
seconds while a CD is being played, the CD being
played will be ejected, and the next CD will be played.
When the
button is pushed for more than 1.5
seconds while CDs are loaded, all of the CDs in the
CD changer will be ejected.
If a CD is ejected by pushing the
button, and it is
not taken out from the loading slot within 15 seconds,
the CD will automatically be reloaded into the slot to
protect the CD.
If an error message appears on the display, push the
button.
When the ignition switch is in the “OFF” or “LOCK”
position, it is possible to eject all the CDs. However,
the audio unit will not be activated.
LW-MW-FM radio operation
GUID-17A9BA34-7D79-4060-AC48-A430CAD55F06
JVH0045X
The audio system operates when the ignition switch is
in the “ACC” or “ON” position.
FM-AM button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the button is pushed while the audio
system is off, the audio system and the radio will turn
on. When the
button is pushed while the CD
player is already operating, it will automatically turn off
and the radio will turn on.
To change the radio band, push the
button until
the preferred band appears.
FM 1 ? FM 2 ? FM T ? MW ? LW
During FM reception, when the
button is pushed
for longer than 1.5 seconds, stations are searched for
and the 6 stations of the FM T band. The sound is
muted until the auto store operation is completed,
upon which preset channel 1 is automatically tuned in.
TUNE button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
manually, push the
button until the preferred
frequency is obtained.
The frequency changes in steps of 100 kHz on the FM
band, 9 kHz on the MW band, and 3 kHz on the LW
band.
SEEK button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When adjusting the broadcasting station frequency
automatically, push the
button. When the
system detects a broadcasting station, it will stop at
that station.
*
1
*
2
*
3
*
4
*
5
*
6
Radio memory buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The audio system can store up to 18 FM station
frequencies (six in each of FM 1, FM 2 and FM T), 6
MW and 6 LW station frequencies.
To store the station frequency manually:
1. Tune to the preferred broadcasting station fre-
quency by using the
or
button.
2. Push and hold a radio memory button
*
1
-
*
6
until a beep sounds. (The radio mutes when the
memory button is pushed.)
3. The channel indicator will be displayed and the
radio mute will be cancelled, indicating that the
memory is stored properly.
4. Perform steps 1 - 3 for all other memory buttons.
If the battery cable is disconnected, or if the audio fuse
blows, the radio memory will be erased. If this occurs,
reset the desired stations.
Radio data system (RDS)
GUID-67777254-BE04-4DA5-9C3C-300C65EE536A
Alternative Frequency (AF):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
. The AF function operates in the FM (radio) and CD
modes.
. When the AF mode is set to “ON” in the user
setup menu mode, the AF indicator illuminates.
For activation or deactivation, use the MENU button.
(Details are explained later in this section.)
. Automatic switching function
This function compares the strengths of the
signals of all the stations on the AF list and
selects the station with the optimum reception
conditions.
. Program Information (PI) search
Program Information (PI) search begins automati-
cally if no suitable station is found with the above
automatic switching function. The PI search
function checks each RDS station with the same
PI code. During this time the sound is muted and
“PI SEARCH” is displayed. The PI search opera-
tion stops when a suitable station is found. If no
station is found once all the frequencies have been
searched, the radio retur ns to the previous
frequency.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
When EON data is being received, this enables
automatic retuning of other preset stations on the
same network. Also, network linked services can
be used. The EON indicator turns on during the
reception of RDS EON stations in the FM mode.
RDS functions:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
. Programme Service (PS) function (station
name display function)
When an RDS station is tuned in with seek or
manual tuning, the RDS data is received and the
Program Service (PS) name is displayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION — EBU SPEC FOR
INFO)
When the radio receives PTY code 31 (an
emergency broadcast code), the sound is inter-
rupted, the emergency broadcast is heard, and
“PTY31 ALARM” is displayed. The volume level at
this time is the same as that for traffic announce-
ments. Once the emergency broadcast is finished,
the unit immediately returns to the previous
source.
. REG (Regional) mode
Some local radio stations are linked together
according to their region because they only offer
limited coverage due to their limited number of
transmitters. If the signal from one station be-
comes weak while you are driving around, RDS
mode will switch to another local station in the
region with a stronger signal.
When the REG mode is activated in the FM band
and the radio receiver is tuned to a local radio
station, it will keep receiving this radio station
without switching to another local station. For
activation or deactivation, use the MENU button.
(Details are explained later in this section.).
Traffic Announcement (TA):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
. The TA function operates in the FM and CD
modes.
. The TA mode is turned on or off when the TA/
NEWS button is pushed for less than 2 seconds.
. The TA mode operates regardless of whether the
AF mode is on or off.
. “TA ON” is displayed when the TA mode is turned
on, and the TA indicator turns on. “TA OFF” is
displayed when the TA mode is turned off, and the
TA indicator turns off.
The following function operates when the TA mode is
on:
. Traffic announcement interrupt function
When a traffic announcement is received, the
announcement is t uned in and the volume
increases to the set level.
Once the traffic announcement is finished, the unit
returns to the source which was set before the
traffic announcement started, and the volume
returns to the previous level. For EON stations,
the radio is interrupted by another EON station
with traffic announcements.
The traffic announcement interrupt mode is
cancelled if the TA/NEWS bu tton is pushed
during a traffic announcement. The TA mode
returns to the standby mode and the audio unit
returns to the previous source.
News mode:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
When the NEWS button or the TA/NEWS button is
pushed for longer than 2 seconds in the FM mode, the
news function is activated. “NEWS” is displayed for 3
seconds and the NEWS indicator appears on the
display.
When the news function is activated, the radio
Monitor, Heater and air conditioner, and audio system 4-61
4-62 Monitor, Heater and air conditioner, and audio system
receives a news code from the FM broadcasting news
station and the play mode will be interrupted. Once the
news broadcast is finished, the unit returns to the
previous mode.
In some countries or regions, this serv i c e is n ot
available or the signal is too weak to be received.
1. News standby mode
.
The news standby mode can be activated in
the FM or CD mode.
.
A news interruption will be announced and
“NEWS” will be displayed when the radio
detects the news code from the tuned station
or EON stations. The display will then change
to the PS name of the interrupting station.
.
When pushing the TA/NEWS button for longer
than 2 seconds, the news standby mode is
turned off and the indicator disappears from
the display.
2. News interruption mode
.
When the TA/NEWS button is pushed during
the news interruption mode, the radio returns to
the pre vious source. However, the news
standby mode is maintained.
.
When the
button is pushed during the
news interruption mode, the radio changes to
the CD mode. However, the news standby
mode is maintained.
If the radio band is changed to the MW or LW,
the news standby mode will be turned off.
MENU button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To confi gure Alternative Frequ ency, Regional and
Language settings, perform the following procedure:
1. Push and hold the MENU button for at least 1.5
seconds.
2. Turn the MENU/VOL dial clockwise or counter-
clockwise. The display message will change as
follows:
AF Û REG Û LANGUAGE Û AF
. To activate or deactivate the AF and REG mode,
briefly push the ENTER button when AF or REG
appears on the display and turn the MENU/VOL
dial clockwise or count erclockwi se to switch
between the off or on position. After selection,
push the ENTER button to confirm the settings.
— When the AF mode is enabled, the audio unit
will automatically re-tune to a stronger fre-
quency if the radio signal becomes weak.
— When the REG mode is enabled, the audio unit
will maintain and maintain the station which is
broadcasting local (regional) programmes.
. To change the display language, briefly push the
ENTER button when LANGUAGE appears on the
display then turn the MENU/VOL dial clockwise or
counterclockwise to select the appropriate lan-
guage setting.
ENGLISH Û DUTCH Û FRENCH Û SPANISH
Û GERMAN Û ITALIAN Û PORTUGUESE Û
ENGLISH
After selecting the preferred language, push the
ENTER button to exit the menu.
To configure the SPEED volume and BEEP settings,
perform the following procedure:
1. Push the MENU button.
2. Turn the MENU/VOL dial clockwise or counter-
clockwise. The display message will change as
follows:
PHONE SETUP Û SPEED VOL Û CLOCK Û
BEEP Û PHONE SETUP
For phone operation, see “Bluetooth
®
Hands-Free
Phone System (if equipped for model without
navigation system)” (P.4-64).
. When SPEED VOL appears on the display, briefly
push on the ENTER button then turn the MENU/
VOL dial clockwise or counterclockwise to adjust
the level of the volume.
Adjusting the setting to 0 (zero) turns off the
speed volume feature . Increasing the speed
volume setting results in the audio volume
increasing more rapidly with vehicle speed. Push
the ENTER button again to save the setting.
. When BEEP appears on the display, briefly push
the ENTER button and then turn the MENU/VOL
dial clockwise or counterclockwise to switch the
beep sound on or off. Push the ENTER button
again to save the setting.
After the preferred levels have been set, push the
MENU button to exit the menu or wait at least for 10
seconds without pressing any buttons.
FM-AM RADIO WITH COMPACT DISC (CD)
PLAYER AND NAVIGATION (if equipped)
GUID-3CD35F36-2CD C-49BE-A86A-02A0887F43E4
SAA2589
For details, see the separately provided NISSAN
Connect Owner’s Manual.
STEERING WHEEL SWITCH FOR AUDIO
CONTROL (if equipped)
GUID-40CA1AF7-B714-4 8E6-B8BC-A5690067503D
JVH0512X
Type A
JVH0005X
Type B
1. SOURCE select switch
2. VOLUME control switch
3. Tuning switch
The audio system can be operated using the controls
on the steering wheel.
SOURCE select switch
GUID-811ED559-6CFC-4067-ADEC-74EDDB357DA7
Push the source select switch to change the mode to
available audio source.
VOLUME control switch
GUID-03CE7E4A-30 F6-49F1-A221-5406070450BE
Push up or down the VOLUME control switch to
increase or decrease the volume.
Tuning switch
GUID-D7D0D2AF-C58A-40AA-A161-00120358D27C
Memory change (radio):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the tuning switch for less than 1.5 seconds to
change the next or previous radio preset.
SEEK tuning (radio):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the tuning switch for more than 1.5 seconds to
seek the next or previous radio station.
APS (Automatic Program Search) FF, APS REW
(CD, USB, iPod
®
):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the tuning switch for less than 1.5 seconds to
return to the beginning of the present program or skip
to the next program. Push several times to skip back or
skip through programs.
This system searches for the blank intervals between
selections. If there is a blank interval within one
program or there is no interval between programs,
the system may not stop in the desired or expected
location.
Push the tuning switch for more than 1.5 seconds to
fast forward or rewind through the track.
CD/USB MEMORY CARE AND CLEANING
GUID-626445F6-B0B9-49CA-AC1F-A3B0F19DEEE3
CD
GUID-14B8AB6E-6497-4F00-90D4-FE1C6DC63C99
SAA0451
. Handle a disc by its edges. Never touch the
surface of the disc. Do not bend the disc.
. Always place the discs in the storage case when
they are not being used.
. To clean a disc, wipe the surface from the center
to the outer edge using a clean, soft cloth. Do not
wipe the disc using a circular motion.
Do not use a conventional record cleaner or
alcohol intended for industrial use.
. A new disc may be rough on the inner and outer
edges. Remove the rough edges by rubbing the
inner and outer edges with the side of a pen or
pencil as illustrated.
USB memory device (if equipped)
GUID-7A78BF79-0F32-41D3-8678-81EEB2764082
. Do not touch the terminal portion of the USB
memory device.
. Do not place heavy objects on the USB memory
device.
. Do not store the USB memory device in highly
humid locations.
Monitor, Heater and air conditioner, and audio system 4-63
4-64 Monitor, Heater and air conditioner, and audio system
. Do not expose the USB memory device to direct
sunlight.
. Do not spill any liquids on the USB memory
device.
Refer to the USB memory device Owner’s Manual for
the details.
GUID-3312FB98-F728-4E43-8A1B-E7F3F96AD38B
When installing a CB, ham radio or a car phone in your
vehicle, be sure to observe the following cautions,
otherwise the new equipment may adversely affect the
Engine Control System and other electronic parts.
CAUTION:
. Keep the antenna as far away as possible
from the Electronic Control Module.
. Keep the antenna wire at least 20 cm (8 in)
away from the Engine Control harnesses. Do
not route the antenna wire next to any
harnesses.
. Adjust the antenna standing wave ratio as
recommended by the manufacturer.
. Connect the ground wire from the radio
chassis to the body.
. For details, consult a NISSAN dealer.
NOTE:
For Europe:
For further information, visit the NISSAN web
site: Select your coun-
try from the list and go to the “SERVICES” menu.
If not available on the web site, contact a
NISSAN dealer.
GUID-C0019163-8F2F-4E73-8491-94964CD48309
WARNING:
. Use a phone after stopping your vehicle in a
safe location. If you have to use a phone
while driving, exercise extreme caution at all
times so full attention may be give n to
vehicle operation.
. If a conversation in a moving vehicle re-
quires you to take notes, pull off the road to
a safe location and stop your vehicle before
doing so.
CAUTION:
To avoid draining the vehicle battery, use a
phone after starting the engine.
NOTE:
Wireless LAN (Wi-Fi) and the Bluetooth
®
func-
tions share the same frequency band (2.4 GHz).
Using the Bluetooth
®
and the wireless LAN
functions at the same time may slow down or
disconnect the communication and cause un-
desired noise. It is recommended that you turn
off the wireless LAN (Wi-Fi) when using the
Bluetooth
®
functions.
For model with navigation system, see the separately
provided NISSAN Connect Owner’s Manual.
Your NISSAN is equipped with the Bluetooth
®
Hands-
Free Phone System. If you are an owner of a
Bluetooth
®
enabled cellular phone, you can set up
the wireless connection between your cellular phone
and the in-vehicle phone module. With Bluetooth
®
wireless technology, you can make or receive a hands-
free telephone call with your cellular phone in the
vehicle.
CAR PHONE OR CB RADIO
Bluetooth
®
HANDS-FREE PHONE
SYSTEM (if equipped for model
without navigation system)
Once your cellular phone is paired to the in-vehicle
phone module, no other phone connecting procedure
is required. Your phone is automatically connected with
the in-vehicle phone module when the ignition switch
is placed in the “ON” position with the paired cellular
phone turned on and carried in the vehicle.
You can register up to 5 different Bluetooth
®
cellular
phones to the in-vehicle phone module. However, you
can talk on only one cellular phone at a time.
Before using the Bluetooth
®
Hands-Free Phone
System, refer to the following notes.
. Set up the wireless connection between a cellular
phone and the in-vehicle phone module before
using the system.
. Some Bluetooth
®
enabled cellular phones may not
be recognized by the in-vehicle phone module.
. You will not be able to use a Hands-free phone
under the following conditions.
— Your vehicle is outside of the telephone service
area.
— Your vehicle is in an area where it is difficult to
receive radio waves; such as in a tunnel, in an
underground parking garage, near a tall build-
ing or in a mountainous area.
— Your cellular phone is locked to prevent it from
being dialed.
When the radio wave condition is not ideal or ambient
sound is too loud, it may be difficult for the other party
to hear your voice during a call. Please close the
windows if possible.
Do not place the cellular phone in an area surrounded
by metal or far away from the in-vehicle phone module
to prevent tone quality degradation and wireless
connection disruption.
While a cellular phone is connected through the
Bluetooth
®
wireless connection, the battery power of
the cellular phone may discharge quicker than usual.
The Bluetooth
®
Hands-Free Phone System cannot
charge cellular phones.
Refer to the cellular phone Owner’s Manual regarding
the telephone charges, cellular phone antenna and
body, etc.
This wireless hands-free system is based on Blue-
tooth
®
technology.
. Frequency: 2402 MHz - 2480 MHz
. Output Power: 4.14 dBm EIRP
. Modulation: FHSS GFSK 8DPSK, p/4DQPSK
. Number of Channel: 79
. This wireless equipment cannot be used for any
services related to safety due to the possibility of
radio interference
REGULATORY INFORMATION
GUID-25D0ACED-D43F-490A-8418-3E946C5DB1DC
Bluetooth
®
is a trademark owned
by Bluetooth SIG, Inc. and li-
censed to Clarion Co., Ltd. and
Daewoo IS Corp.
CE STATEMENT
GUID-416E4A9B-CAB9-4F48-835D-F95D3FF6EC4 0
Hereby “Clarion Co., Ltd.” and Daewoo IS Corp.
declares that this Bluetooth car kit AV System is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
NSY0105
HANDS-FREE PHONE SYSTEM (Type A)
GUID-AF80CC7C-7089-4082-A3CA-43A5828992D3
JVH0006X
For Europe
JVH0046X
For South Africa
1. PHONE SEND button
2. PHONE END/BACK button
3. PHONE BOOK button
The following options can be selected:
. Paired list
. Pair phone
. Delete phone
. Bluetooth
®
connection
. Delete phone book
Monitor, Heater and air conditioner, and audio system 4-65
4-66 Monitor, Heater and air conditioner, and audio system
. My number
Pairing procedure
GUID-BF64A5E4-2BB9-4D3F-9303-CAE35D7CF83D
If you wish to make a Bluetooth
®
connection for the
first time between your cellular phone and the Blue-
tooth
®
system of the audio unit, perform the following
pairing procedure.
1. Place the ignition switch in the “ACC” position.
2. Switch on the audio system and your cellular
phone.
For the vehicle:
1. Briefly push the MENU button.
2. Push the ENTER button.
3. Turn the MENU/VOL dial and select PAIR PHONE
then push the ENTER button.
4. The display shows READY TO PAIR then PASS-
CODE=1234.
On the cellular phone:
1. Activate the Bluetooth
®
connection.
2. Activate the search mode for Bluetooth
®
equip-
ment. Refer to the owner’s manual of your cellular
phone for further details. If the search mode finds
the device, it will be shown on your cellular phone
display.
3. Select the device name MY CAR.
4. Enter the passcode number 1234 as shown on
the display of the audio unit with the keypad on
your cellular phone and then push the confirmation
button on your cellular phone.
Action Screen display
Push briefly MENU button
; PHONE SETUP
Push ENTER
;
Turn VOLUME dial PAIR PHONE
;
Push ENTER
READY TO PAIR
PASSCODE=1234
;
Your cellular phone setup:
select MY CAR then enter
1234
;
If successful PAIRING OK
;
CONNECT OK
Mobile 1 *1
PAIR PHONE
Push
for the main
screen.
*1: Mobile name
Once the connection is finalized, the audio unit will
automatically register the cellular phone and the audio
unit display shows PAIRING OK and CONNECT OK. If
it fails to register, the display shows PAIRING FAIL
then start the procedure, previously described, again
or consult the owner’s manual of your cellular phone.
You can register up to 5 different Bluetooth
®
cellular
phones. However, you can only use one cellular phone
at a time. If you have 5 different Bluetooth
®
cellular
phones registered, a new cellular phone can only
replace one of the 5 existing paired phones. Use DEL
PHONE to delete one of the existing paired phones.
Paired phone list
GUID-8FD4AF0F-878C-461C-8CBE-7AD191238321
The paired phone list shows which phones have been
paired or registered with the Bluetooth
®
system. If the
list contains multiple phones then you can select the
appropriate phone to connect with the Bluetooth
®
system.
Action Screen display
Briefly push
MENU
; PHONE SETUP
Push ENTER
; PAIRED LIST
Push ENTER
; Mobile 1
Turn MENU/
VOL dial
Mobile 2
;
Push ENTER PLEASE WAIT
;
CONNECT OK
CONNECT
FAIL
PAIRED LIST
Push
for
the main screen.
In the above example procedure, “Mobile 2” will be
connected.
Removing a paired phone
GUID-72778B53-BB5A-4C47-9A36-9C3D67C5 246B
Deletes the con nection between the Bluetooth
®
system and the registered cellular phone.
Action Screen display
Briefly push MENU
; PHONE SETUP
Push ENTER
;
Turn MENU/VOL dial
; DEL PHONE
Push ENTER
; Mobile 1
Turn MENU/VOL dial Mobile 2
;
Push ENTER DELETE? <YES>
;
Push ENTER * DELETED
; DEL PHONE
Push
for the main
screen.
*: For the “Mobile 2” connection th e screen
displays “DISCONNECTED”, followed by “Mo-
bile 2”, then “DELETED”.
In the above example, “Mobile 2” will be deleted while
“Mobile 1” remains connected to the system.
Bluetooth
®
activation
GUID-BF05010A-DED3-472E-8F60-FACA65775EF5
Activates or deactivates the Bluetooth
®
function. You
will need to activate the Bluetooth
®
function in order to
enable your hands-free phone system (except in the
pairing mode when it will be activated automatically).
Action Screen display
Push MENU
; PHONE SETUP
Push ENTER
;
Turn MENU/VOL dial BLUETOOTH
;
Push ENTER B’TOOTH <OFF>
;
Turn MENU/VOL dial B’TOOTH <ON>
;
Push ENTER BLUETOOTH
Push
for the main
screen.
Displaying MY NUMBER
GUID-CC38BD46-1CC9-4826-BA29-BD5ACC75DAB8
If your cellular phone is equipped with the function, the
phone number of the active cellular phone will be
displayed on the hands-free phone system.
Delete phone book list
GUID-80973A26-DCD9-46F6-82C2-AF0A9B4FD632
To delete all the contacts from the phone book,
proceed as follows:
Action Screen display
Briefly push MENU
; PHONE SETUP
Push ENTER
;
Turn MENU/VOL dial DEL P.BOOK
;
Push ENTER DEL ALL? <NO>
;
Turn MENU/VOL dial DEL ALL? <YES>
;
Push ENTER DELETING
DELETED
DEL P.BOOK
Push
for the main
screen.
Phone book
GUID-AFB80D0F-6A98-40E1-B6FC-9F2C09FADD3E
When the phone book button is pushed, the
following options can be selected by turning the
MENU/VOL dial in either direction.
. SEARCH
. Names (contact names)
. Speed dial mode [1Name (contact name)]
. DELETE NAME
. EDIT NAME
. ADD NAME
. Send name using Bluetooth
®
technology [
ADD NAME]
. Send all the phone book entries in the cellular
phone using Bluetooth
®
technology [
DOWNLOAD]
Monitor, Heater and air conditioner, and audio system 4-67
4-68 Monitor, Heater and air conditioner, and audio system
The phone book can store up to 250 names with
numbers and can be selected for calling. To add a
contact to the phone book proceed as follows:
Action Screen display
Push with a long push
button
; ADD NAME
Push ENTER
; ENTER NAME
Turn MENU/VOL dial ABC
;
Focus on “J”
IJK
Push ENTER
;
Turn MENU/VOL dial
Focus on “O”
NOP
;
Push ENTER
;*1 *3 JO
Turn MENU/VOL dial OK
;
Push ENTER
; ENTER NUMBER
Push ENTER then turn MENU/
VOL dial
1
; *2 *3
Push ENTER 123456789
;
Turn MENU/VOL dial
; OK
Push ENTER
SAVED
NOTE:
In the above example the contact name JO and
phone number 123456789 will be added.
*1: To insert special characters select the following
character options A: Alphabetic characters, 1/2:
Numerical characters, A
¨
: Latin characters and
@: Symbol characters.
*2: Select the number then confirm your selection
by pushing the ENTER button, and then proceed
likewise for every number.
*3: To correct an entry, briefly push the
button
then enter the correct details. To delete all
characters push the
button for more than 1
second.
NOTE:
You can also store the name and the phone
number in one of the six preset buttons on the
audio unit for frequently used phone numbers.
Transferring an entry to the phone book:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
You can also send a name (contact) from a connected
cellular phone to the phone book using Bluetooth
®
technology.
Action Screen display
Briefly push
button
;
Turn MENU/VOL dial
ADD NAME
;
Push ENTER SEND NAME
; *1 *2 JOE
Push ENTER
; *3 0123456789
Push ENTER SAVED YES
;
Push ENTER SAVED
;
ADD NAME
Push
for the main screen.
*1: The Bluetooth
®
icon will blink for 2 minutes.
*2: Send the name via the registered cellular phone
within the 2 minutes.
*3: Phone number is displayed.
Transferring all phone book entries at the same
time:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
If your cellular phone is equipped with the function, you
can download all the phone book entries in the cellular
phone to the hands-free system at the same time.
Action Screen display
Briefly push
button
;
Turn MENU/VOL dial
DOWNLOAD
;
Push ENTER
; APPEND?
Turn MENU/VOL dial OVERWRITE?
;
Push ENTER
DOWNLOAD-
ING...
DOWNLOAD OK
DOWNLOAD
Push
for the menu
screen.
NOTE:
. If you select APPEND, downloaded entries
will be saved in the available space without
deleting previously saved information in the
hands-free system. If there is not enough
space, the downloaded entries that exceed
the space available will not be saved and
MEMORY FULL appears on the display.
. If you select OVERWRITE, the downloaded
entries will be saved on top of the previously
saved information. (The previously saved
information will not be saved.) You can save
up to 250 entries. If you attempt to download
more than 250 entries, the remaining entries
w ill not be saved and MEMORY FULL
appears on the display.
Edit
GUID-54A2951A-B5B8 -4161-862D-560E88062263
You can edit a name or phone number stored in the
phone book.
Action Screen display
Push
button
;
Turn MENU/VOL dial
; EDIT NAME
Push ENTER
;*1
Turn MENU/VOL dial JOE
;
Push ENTER
; JOE OK <@OKA>
Turn MENU/VOL dial
; Focus on “Y” JOE <XYZ>
Push ENTER
; *2*3 JOEY
Push
for more than
1.5 seconds to go to main
screen.
*1: Alternatively use the SEARCH mode to select
the appropriate entry to edit.
— SEARCH appears on the display then push the
ENTER button.
— Select the first character of the name then push
the ENTER button.
— The name should be displayed. If necessary, turn
the MENU/VOL dial to select the correct name.
*2: When the
button is pushed briefly, the
cursor will move one step backwards and the
last character will be deleted. To delete all
characters push the
button for more than 1
second.
*3: If necessary, you can edit the telephone number.
After editing the name, select OK then push the
ENTER button to confirm and edit the number as
described for name editing.
Delete a name:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To delete a name (contact) from the phone book,
proceed as follows:
1. Briefly push the
button.
2. Turn the MENU/VOL dial then select the DELETE
NAME.
3. Push the ENTER button.
4. Turn the MENU/VOL dial to the name that needs
to be deleted then push the ENTER button.
5. The display will show DELETE? YES. If applicable,
turn the MENU/VOL dial to select DELETE? NO.
6. The display will show the message DELETED.
The search mode can also be performed as follows:
1. Briefly push the
button.
2. SEARCH appears on the display then push the
ENTER button.
3. Select the first character of the name then push
the ENTER button.
4. The display will now show the name(s) beginning
with the corresponding character. If necessary,
turn the MENU/VOL dial to select the correct
name.
5. Push the ENTER button and the display will show
DELETE? YES. If applicable, turn the MENU/VOL
dial to select DELETE? NO.
6. To confirm the selection, push the ENTER button.
Speed dial buttons:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
After entering the names and phone numbers, you can
assign the six preset buttons to the most frequently
dialled phone numbers.
1. Push the
button.
2. Select the name by turning the MENU/VOL dial or
using the search name mode.
3. Once found, push the assigned preset button until
a confirmation beep is heard. The name and phone
number are now stored under that button.
Hands-free phone control
GUID-B93C0DB4-53F9-4DD1-A870-91CEB3B4AA29
The hands-free mode can be operated using the
telephone button controls on the audio unit or on the
steering wheel.
Monitor, Heater and air conditioner, and audio system 4-69
4-70 Monitor, Heater and air conditioner, and audio system
Initiating a call:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
A call can be initiated using one of the following
methods:
. redial
. phone book
. voice tag
. speed dial (preset buttons)
NOTE:
During the active call you can adjust the micro-
phone volume by briefly pushing the MENU
button then adjusting the volume by turning
the MENU/VOL dial within the value range of −2
to +2. To confirm the entry, briefly push the
ENTER or
button or wait for 10 seconds to
return to the active call main screen.
Redial:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Use the redial mode to call the last number that was
dialled.
1. Briefly push the
button.
2. Select REDIAL.
3. Push the ENTER or the
button to redial the
last number.
Make a call from the phone book:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
In order to dial a contact from the phone book, proceed
as follows:
1. Push the
button.
2. Turn the MENU/VOL dial and select the corre-
spondent name.
3. Push the ENTER or the
button in order to dial
the number.
Alternatively, you can use the search mode as follows:
1. Briefly push the
button.
2. SEARCH appears on the display then push the
ENTER button.
3. Select the first character of the name then the
ENTER button.
4. The name should be displayed.
If necessary, turn the MENU/VOL dial to select the
correct name.
5. Push the ENTER or
button in order to dial the
number.
Calling via voice tag:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
If your cellular phone supports voice recognition, it is
possible to make a call via the voice tag instead of
manual selection, provided the name and number of
your contact has been previously marked and stored in
the phone book of your cellular phone. For details, see
the cellular phone manufacturer’s owner’s manual.
In order to dial via a voice tag, proceed as follows:
1. Push the
button for more than 2 seconds.
2. The display shows SPEAK NOW.
3. Give your voice tag.
Say the voice tag clearly and normally in the
direction of the microphone (located in the ceiling
in front of the rearview mirror).
4. If the voice tag is correct, the phone system will
dial the corresponding number.
Make a call via speed dial:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
To make a speed dial call using one of the assigned
preset buttons, proceed as follows:
1. Briefly push the
button.
2. Push the corresponding preset button (1-6).
Alternatively, you can select the corresponding
preset number by turning the MENU/VOL dial
instead of pushing the preset button.
3. To confirm the selection, push the
button to
make the call.
Receiving a call
GUID-3B2568E4-EF9B-408C-A309-FA648AE9E84D
When receiving an incoming call, the display will show
the caller identification (or NO NUMBER) and you can:
. answer the call by briefly pushing the
button.
. end the call after the conversation by pushing the
button.
. reject the call by pushing the
button.
Steering wheel switch for Bluetooth
®
GUID-6042BBB6-6991-4CA8-86F3-C3751FE5F330
SAA2594
The hands-free mode can be operated using the
controls on the steering wheel.
Volume control switch:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The volume control switch allows you to adjust the
volume of the speakers by pushing the + or − buttons
*
1
.
Telephone button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The and buttons
*
2
allows you to:
. accept an incoming call by pushing the
button.
. reject an incoming call by pushing the
button
during the incoming call.
. end an active call by pushing the
button
once.
. redial the last outgoing call by pushing the
button twice.
. make a speed dial call by pushing the
button then push the scrolling (up/down) switch to
scroll through the preset buttons for the stored
phone numbers. To confirm the selection push the
button to make the call.
. make a call via voice dialling by pushing the
button for more than 2 seconds then say
the voice tag clearly.
HANDS-FREE PHONE SYSTEM (Type B)
GUID-0370979A-D4D1-421D-B957-4B77E149534F
JVH0519X
Buttons:
1. Phone button
2. A-Z button
3. ENTER dial
4. SETUP button
Microphone:
The microphone is located near the map light.
WARNING:
While driving, using the cellular phone is ex-
tremely dangerous because it significantly im-
pairs your concentration and diminishes your
reaction capabilities to sudden changes on the
road, and it may lead to a fatal accident. This
applies to all phone call situations such as when
receiving an incomin g call, during a phone
conversation, when calling through the phone
book search, etc.
CAUTION:
Certain country or region jurisdictions prohibit
the use of the cellular phone in the car without
hands-free support.
This chapter provides information about the NISSAN
hands-free phone system using a Bluetooth
®
connec-
tion.
Bluetooth
®
is a wireless radio communication stan-
dard. This system offers a hands-free feature for your
cellular phone to enhance driving comfort.
In order to use your cellular phone with the Bluetooth
®
of the audio system, the cellular phone must first be set
up. Once it has been set up, the hands-free mode is
automatically activated on the registered cellular phone
(via Bluetooth
®
) when it comes into range.
A notification message appears on the audio display
when the phone is connected, when an incoming call
is being received, as well as when a call is initiated.
When a call is active, the audio system, microphone
(located in the ceiling in front of the rearview mirror),
and steering wheel switches enable hands-free com-
munication.
If the audio system is in use at the time, the radio, CD,
or AUX source mode will be muted and will stay muted
until the active call has ended.
The Bluetooth
®
system may not be able to connect
with your cellular phone for the following reasons:
. The cellular phone is too far away from the vehicle.
. The Bluetooth
®
mode on the cellular phone has
not been activated.
. The cellular phone has not been paired with the
Bluetooth
®
system of the audio unit.
. The cellular phone does not support Bluetooth
®
technology (BT Core v1.2, Hands Free Profile v1.0
and Object Push Profile v1.0).
NOTE:
For details, see the cellular phone’s owner’s
manual.
Hands-free phone setup
GUID-AD3A95BD-3F84-45D9-B2E5-32F97EED83EE
To set up the Bluetooth
®
system to pair with (connect
or register) a preferred cellular phone, push the
button, select the Bluetooth
®
key, and then push the
dial. It is also possible to display the set up menu
directly by pushing the
button.
. Pair Device
Bluetooth
®
cellular phones can be paired with the
system. A maximum of 5 cellular phones can be
registered.
. Select Device
Paired Bluetooth
®
cellular phones are listed on the
display and can be selected for connection.
Monitor, Heater and air conditioner, and audio system 4-71
4-72 Monitor, Heater and air conditioner, and audio system
. Delete Device
A registered Bluetooth
®
cellular phone can be
deleted.
. On/Off
If this setting is turned off, the connection between
the Bluetooth
®
devices and the in-vehicle Blue-
tooth
®
module will be cancelled.
When successfully paired, a notification message will
be displayed. During the connection the following
status icons will be displayed (top left of display):
Signal strength (
), Battery status ( ) and
Bluetooth
®
( ).
*: If the low battery message comes on, the Bluetooth
®
device must be recharged soon.
Making a call
GUID-5EDE54C4-3C12-4043-B578-F240AEE44DC7
The hands-free mode can be operated using the
button on the audio system, or on the steering wheel.
Initiating a call:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
A call can be initiated using one of the following
methods:
. Redial
. Phone book
. Manual dialling
. Missed calls
. Dialled calls
. Received calls
Redial:
To redial or call the last number dialled, push the
Phone button for more than 2 seconds.
Making a call from the phone book:
NOS2763
Once the Bluetooth
®
connection is made between the
registered cellular phone and the audio system, phone
book data will be transferred automatically to the audio
system. The transfer may take a while before comple-
tion.
The phone book data is available only when the phone
is connected to the system. The system downloads the
latest phone book data each time the phone is
connected.
To dial a contact from the phone book proceed as
follows:
1. Push the “Phone” button.
2. Turn the
dial to scroll down to Phone Book
and then push the
dial.
3. Scroll down through the list, select the appropriate
contact name (highlighted), and push the
dial.
4. A screen will show the number to be dialled. If
correct, push the
dial again to dial the
number.
If there are numbers assigned for the contact’s
(home), (cellular phone) or (office), scroll
to select the appropriate number to dial.
Alternatively, the quick search mode can be used as
follows:
1. Push the
button.
2. Turn the
dial for the first alphabetic or
numerical letter of the contact name. Once high-
lighted, push the
dial to select the letter.
3. The display will show the corresponding contact
name(s). Where necessary, use the
dial
again to scroll further for the appropriate contact
name to call.
4. A screen will show the number to be dialled. If
correct, push the
dial again to dial the
number.
Manually dialling a phone number:
NOS2764
WARNING:
Park the vehicle in a safe location, and apply the
parking brake before making a call.
To dial a phone number manually use the audio system
display (virtual keyboard pad) as follows:
1. Push the
button, and turn the dial to
highlight “Call Number”.
2. Push the
dial to select “Call Number”.
3. Turn the dial to scroll along, and select each
number of the phone number. Once highlighted,
push the
dial after each number selection.
To delete the last number entered scroll to the “/”
(Backspace) symbol, and once highlighted push
the
dial. The last number will be deleted.
Pushing the
dial repeatedly will delete each
subsequent number.
4. After entering the last number, scroll to the “
”.
symbol, and push the
dial, or push the
button to dial the number.
Call lists:
A number from the dialled, received, or missed call lists
can also be used to make a call.
. Dialled call
Use the dialled call mode to make a call which is
based on the list of outgoing (dialled) calls.
. Received call
Use the received call mode to make a call which is
based on the list of received calls.
. Missed call
Use the missed call mode to make a call which is
based on the list of missed calls.
1. Push the
button, and select “Call Lists”.
2. Turn the
dial to scroll to an item, and push the
dial to select it.
3. Scroll to the preferred phone number and then
push the
dial, or push the button to dial
the number.
Receiving a call
GUID-38C6DFB3-7609-4197-B484-90CDF2540710
NOS2771
When receiving an incoming call, the display will show
the caller’s phone number (or a notification message
that the caller’s phone number cannot be shown):
. Answer the call by pushing the
button briefly,
or push the
dial.
. End the call, after the conversation, by:
— Pushing the
button briefly again.
— Pushing the
dial when the “ ” symbol
is highlighted.
If “
” is not highlighted, turn the dial to
“
” , and push the dial.
. Reject the call by selecting the “
” symbol on
the screen using the
dial and pushing the
dial to select it.
During a call:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
During a call, by scrolling and pushing the dial,
you can select the following options:
. “
” — Use this item to enter numbers during a
call. For example, if directed by an automated
phone system to dial an extension number the
system will send the tone associated with the
selected number.
. “
” — Use this item (the transfer handset
command) to transfer the call from the audio
system to your cellular phone.
To transfer the call back to hands-free via the
audio system select “
”.
Steering wheel switch for Bluetooth
®
GUID-FA7A0A09-E0B4-4302-A45C-75A575A6C0C5
JVH0528X
1. Volume control switch
2. Phone send/end button
The hands-free mode can be operated using the
controls on the steering wheel.
Volume control switch:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The volume control switch allows you to adjust the
volume of the speakers by pushing the + or − buttons.
Phone send/end button:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
The and buttons can be used as follows.
. Push the
button to accept an incoming call.
. Push the
button to reject an incoming call.
. Push the
button to end an active call.
. Push and hold the
button to redial the last
outgoing call.
Monitor, Heater and air conditioner, and audio system 4-73
4-74 Monitor, Heater and air conditioner, and audio system
MEMO

Related Topics

Popular Owner Manuals