2004-2009 Nissan Micra 4 Door Monitor, Heater and air conditioner, and audio system -> Heater and air conditioner (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Monitor, Heater and air conditioner, and audio system -> Heater and air conditioner (if equipped) for Your Nissan Micra 4 Door Third Generation (2004-2009)

4-6 Monitor, Heater and air conditioner, and audio system
Circle type
GUID-8676C787-D33 1-4BCD-B930-CCCED884CE0E
SAA3126
Adjust the air flow direction of the ventilators by
opening, closing or rotating.
GUID-32171670-7746-42F3-A876-35BA3870933B
WARNING:
. The heater and air conditioner operate only
when the engine is running.
. Never leave children or adults who would
normally require the support of others alone
in the vehicle. Pets should not be left alone
either. They could unknowingly activ ate
switches or controls and inadvertently be-
come involved in a serious accident and
injure themsel ves. On hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause se-
vere or possibly fatal injuries to people or
animals.
. Do not use the recirculation mode for long
periods as it may cause the interior air to
become stale and the windows to fog up.
. Do not adjust the heating and air condition-
ing controls while driving so that full atten-
tion may be given to vehicle operation.
The heater and air conditioner operate when the
engine is running. The air blower will operate when the
ignition switch is in the “ON” position even if the
engine is turned off.
For model with Stop/Start System (if equipped
for Europe) or Idling Stop System (for Hong
Kong):
The Stop/Start System or Idling Stop System will not
stop the engine under the following conditions:
. The front defogger mode is on. (automatic air
conditioner)
. The air flow control dial is in the front defogger
position. (manual air conditioner)
. The rear window defogger mode is on.
While the engine is stopped by the Stop/Start System
or Idling Stop System, taking one of the following
actions will automatically start the engine:
. Turn the front defogger mode on. (automatic air
conditioner)
. Turn the air flow control dial to the front defogger
position. (manual air conditioner for Europe)
. The air flow control dial is in the front defogger
position and the fan speed control dial is on.
(manual air conditioner for Hong Kong)
. Turn the rear window defogger mode on.
When the engine is stopped by the Stop/Start System
or Idling Stop System, performance of the heater and
air conditioner may be reduced to minimize the fuel
consumption. For the best heating and air conditioning
performance, restart the engine by pushing the Stop/
Start System or Idling Stop System OFF switch. (See
“Stop/Start System OFF switch” (P.5-23) or “Idling
Stop OFF switch” (P.5-21).)
OPERATING TIPS (for automatic air condi-
tioner)
GUID-D0A8C178-DC0D-4568-983C-AEE197F69A10
JVH0349X
HEATER AND AIR CONDITIONER (if
equipped)
JVH0549X
Left-Hand Drive (LHD) model*
When the engine coolant temperature and outside air
temperature are low, the air flow from the foot outlets
may not operate. However, this is not a malfunction.
After the coolant temperature warms up, the air flow
from the foot outlets will operate normally.
The sensors
*
A
and
*
B
, located on the instrument
panel, help maintain a constant temperature. Do not
put anything on or around the sensors.
*: The illustration is for the Left-Hand Drive (LHD)
model. For the Right-Hand Drive (RHD) model, the
layout will be the opposite.
MANUAL AIR CONDITIONER
GUID-87DCBB8E-C762-4125-8CCF-6F24851A7047
JVH0545X
1. Rear window defogger switch (if equipped) (See
“Defogger switch” (P.2-39).)
2. Fan speed control “
” dial
3. “A/C” (Air Conditioner) button (if equipped)
4. Air flow control dial
5. Temperature control dial
6. Air intake lever (Outside air circulation “
”
/Air recirculation “
”)
To turn off the heater and air conditioner, turn the fan
speed control “
” dial to the “OFF” (0) position.
Controls
GUID-350631D1-842B-4058-A57A-CF9C03EE21DB
Outside air circulation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Move the air intake lever to the “ ” position. The air
flow is drawn from outside the vehicle.
Air recirculation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Move the air intake lever to the “ ” position. The air
flow is circulated inside the vehicle.
Air flow control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Turn the air flow control dial to change the air flow
mode.
— Air flows from the center and side
ventilators.
— Air flows from the center and side
ventilators and foot outlets.
— Air flows mainly from the foot outlets.
— Air flows from the defogger and foot
outlets.
— Air flows mainly from the defogger outlets.
Fan speed control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Turn the fan speed control “ ” dial clockwise to
increase the fan speed.
Turn the fan speed control “
” dial counterclock-
wise to decrease the fan speed.
Monitor, Heater and air conditioner, and audio system 4-7
4-8 Monitor, Heater and air conditioner, and audio system
Temperature control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Turn the temperature control dial to set the desired
temperature. Turn the dial between the middle and the
right position to select the hot temperature. Turn the
dial between the middle and the left position to select
the cool temperature.
Heater operation
GUID-C1FA73F7-91C1-457B-9DDF-C2A78509BAE2
Heating:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode is used to direct heated air to the foot
outlets.
1. Move the air intake lever to the “
” position for
normal heating.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
Ventilation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode directs outside air to the side and center
ventilators.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position.
Defrosting or defogging:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode directs the air to the defogger outlets to
defrost/defog the windows.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
5. Turn the side ventilators to the side windows to
defrost or defog for a clear view to the side
mirrors.
. To remove frost from the outside surface of the
windshield quickly, turn the temperature control
dial to the maximum hot position and the fan
speed control “
” dial to the maximum position.
. If it is difficult to defog the windshield, turn the
“A/C” button (if equipped) on.
Bi-level heating:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode directs cool air from the side and center
vents and warm air from the foot outlets. When the
temperature control dial is turned to the maximum hot
or cool position, the air between the ventilators and the
foot outlets is the same temperature.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the desired
position.
Heating and defogging:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode heats the interior and defogs the windows.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Turn the temperature control dial to the maximum
hot (right) position.
5. Turn the side ventilators to the side windows to
defrost or defog for a clear view to the side
mirrors.
Air conditioner operation (if equipped)
GUID-D1F2A228-5D79-4DCC-9F91-CDD4640B76CF
The air conditioner system should be operated for
approximately 10 minutes at least once a month. This
helps prevent damage to the air conditioner system
due to the lack of lubrication.
Cooling:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode is used to cool and dehumidify the air.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Push the “A/C” button on. (The “A/C” indicator
light will illuminate.)
5. Turn the temperature control dial to the desired
position between the middle and the cool (left)
position.
. For quick cooling when the outside temperature is
high, move the air intake lever to the “
”
position. Be sure to move the air intake lever to the
“
” position for normal cooling.
. A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air is
cooled rapidly. This does not indicate a malfunc-
tion.
Dehumidified heating:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode is used to heat and dehumidify the air.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Push the “A/C” button on. (The “A/C” indicator
light will illuminate.)
5. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
Dehumidified defogging:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
This mode is used to defog the windows and
dehumidify the air.
1. Move the air intake lever to the “
” position.
2. Turn the air flow control dial to the “
” position.
3. Turn the fan speed control “
” dial to the
desired position.
4. Push the “A/C” button on. (The “A/C” indicator
light will illuminate.)
5. Turn the temperature control dial to the desired
position.
6. Turn the side ventilators to the side windows to
defrost or defog the side mirrors.
AUTOMATIC AIR CONDITIONER
GUID-B3AA77E7-D921-4611-ACF8-63E1BEECFFDA
SAA2592
1. Front defogger “
” button
2. Display
3. Rear window defogger “
” bu tton (See
“Defogger switch” (P.2-39).)
4. “AUTO” button
5. Temperature control “
”/“ ” buttons
6. Fan speed control “
+” and “ -”buttons
7. “OFF” button
8. “MODE” (air flow control) button
9. Air recirculation “
” button
10. Outside air circulation “
” button
11. “A/C” (Air Conditioner) button
Automatic operation (AUTO)
GUID-8705A708-CB0A-4DB8-95A2-9E5BB932D63F
The AUTO mode may be used year-round as the
system automatically controls constant temperature, air
flow distribution and fan speed after the desired
temperature is set manually.
To turn off the heater and air conditioner, push the
“OFF” button.
Cooling and dehumidified heating:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. Push the “AUTO” button. (“AUTO” will appear on
the display.)
2. If the “A/C” indicator light does not illuminate,
push the “A/C” button. (The “A/C” indicator light
will illuminate.)
3. Push the temperature control “
”/“ ” but-
ton to set the desired temperature.
4. If the indicator light on either the outside air
circulation “
” button or the air recirculation
“
” button is illuminated, push and hold the
button with the light illuminated to switch to the
automatic air intake control mode.
A visible mist may be seen coming from the ventilators
in hot, humid conditions as the air is cooled rapidly.
This does not indicate a malfunction.
Heating (A/C off):
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. Push the “AUTO” button. (“AUTO” will appear on
the display.)
2. If the “A/C” indicator light illuminates, push the
“A/C” button. (The “A/C” indicator light will turn
off.)
Monitor, Heater and air conditioner, and audio system 4-9
4-10 Monitor, Heater and air conditioner, and audio system
3. Push the temperature control “
”/“ ” but-
ton to set the desired temperature.
. Do not set the temperature lower than the outside
air temperature. Doing so may cause the tem-
perature to not be controlled properly.
. If the windows fog up, use dehumidified heating
instead of the A/C off heating.
Dehumidified defrosting/defogging:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
1. Push the front defogger “ ” button. (The
“
” indicator light will illuminate.)
2. Push the temperature control “
”/“ ” but-
ton to set the desired temperature.
. To remove frost from the outside surface of the
windshield quickly, set the temperature to a high
temperature and the fan speed to the maximum
level.
. After the windshield is cleared, push the front
defogger “
” button again. (The indicator light
will turn off.)
. When the front defogger “
” button is pushed,
the air conditioner will automatically turn on when
the outside air temperature is above −28C (288F)
to defog the windshield. The air recirculation mode
will automatically turn off. The outside air circula-
tion mode “
” will be selected to improve the
defogging performance.
Manual operation
GUID-F044F738-8179-434A-B42F-6361C0461921
The manual mode can be used to control the heater
and air conditioner to your desired settings. (“MAN-
UAL” will appear on the display.)
To turn off the heater and air conditioner, push the
“OFF” button.
Fan speed control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the fan speed control “ ”/“ ” button. Push
the “
” button to increase the fan speed. Push the
“
” button to decrease the fan speed.
Push the “AUTO” button to change the fan speed to
the automatic mode.
Air flow control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the “MODE” button to change the air flow mode.
— Air flows from the center and side ventila-
tors.
— Air flows from the center and side ventila-
tors and foot outlets.
— Air flows mainly from the foot outlets
— Air flows from the defogger outlets and foot
outlets.
Temperature control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the temperature control “ ”/“ ” button to
set the desired temperature. Push the “
” button to
increase the temperature. Push the “
” button to
decrease the temperature.
Outside air circulation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the outside air circulation “ ” button to draw
the air flow from outside the vehicle. (The “
”
indicator light will illuminate.)
Air recirculation:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
Push the air recirculation “ ” button to circulate the
air flow inside the vehicle. (The “
” indicator light
will illuminate.)
Automatic air intake control:
GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B
If the indicator light on either the outside air circulation
“
” button or the air recirculation “ ” button is
illuminated, push and hold the button with the light
illuminated. (The indicator light will blink twice.) The
automatic air intake control mode is set.
SERVICING AIR CONDITIONER
GUID-EBA0C1E2-F64F-4D2D-98EA-1528B041DF19
WARNING:
The air conditioner system contains refrigerant
under high pressure. To avoid personal injury,
any air conditioner service should be done only
by an experienced technician with the proper
equipment.
The air conditioner system in your vehicle is charged
with a refrigerant designed with the environment in
mind.
This refrigerant will not harm the earth’s ozone
layer. However, it may contribute in a small part to
global warming.
Special charging equipment and lubricant are required
when servicing your vehicle’s air conditioner. Using
improper refrigerants or lubricants will cause severe
damage to the air conditioner system. (See “Air
conditioner system refrigerant and lubricant” (P.9-5).)
A NISSAN dealer will be able to s ervice your
environmentally friendly air conditioner system.
Air conditioner filter (if equipped)
GUID-54721F9E-94E1-4415-942D-E40E02F5EFE3
The air conditioner system is equipped with an air
conditioner filter which collects pollen. To make sure
the air conditioner heats defogs, and ventilates
efficiently, replace the filter according the specified
maintenance intervals listed in a separate maintenance
booklet. To replace the filter, contact a NISSAN dealer.
The filter should be replaced if the air flow decreases
significantly or if windows fog up easily when operating
the heater or air conditioner.
GUID-121E5959-8B59-469A-A2B2-CEC8C9953337
AUDIO OPERATION PRECAUTIONS
GUID-FE28C7B7-A9FC-4E4E-8C0E-BFC08D6010D8
WARNING:
Do not adjust the audio system while driving so
that full attention may be given to vehicle
operation.
Radio
GUID-5802243A-184 F-45A1-84DE-A4B8AC50C97F
. Radio reception is affected by station signal
strength, distance from radio transmitter, build-
ings, bridges, mountains and other external
influences. Intermittent changes in reception
quality normally are caused by these external
influences.
. Using a cellular phone in or near the vehicle may
influence radio reception quality.
Compact Disc (CD) player
GUID-68F3B02B-1FFC-4137-8E67-8B218FA1314A
. During cold weather or rainy days, the player may
malfunction due to the humidity. If this occurs,
remove the CD from CD player and dehumidify or
ventilate the player completely.
. The player may skip while driving on rough roads.
. The CD player sometimes may not function when
the passenger compartment temperature is ex-
tremely high. Lower the temperature before use.
. Do not expose the CD to direct sunlight.
. CDs that are of poor quality , or are dirty,
scratched, covered with fingerprints, or that have
pin holes may not work properly.
. The following CDs may not work properly.
— Copy control compact discs (CCCD)
— Recordable compact discs (CD-R)
— Rewritable compact discs (CD-RW)
SAA0480
. Do not use the following CDs as they may cause
the CD player to malfunction.
— 8 cm (3.1 in) discs (except for FM-AM Radio
with Compact Disc Player (Type B))
— CDs that are not round
— CDs with a paper label
— CDs that are warped, scratched or have
unusual edges.
— CD lens cleaner discs
. This audio system can only play prerecorded CDs.
It has no capabilities to record or burn CDs.
Monitor, Heater and air conditioner, and audio system 4-11
AUDIO SYSTEM (if equipped)

Related Topics

Popular Owner Manuals