2006-2014 Nissan Qashqai SUV In case of emergency -> Push-starting User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

In case of emergency -> Push-starting for Your Nissan Qashqai SUV First Generation (2006-2014)

PUSH-STARTING  
ENGINE OVERHEAT  
CAUTION  
4. Shift the gear lever (MT models) into the N (Neu-  
tral) position [AT or CVT models, move the se-  
lector lever to the P (Park) position].  
WARNING  
Three-way catalyst equipped models should  
not be started by pushing the vehicle as the  
three-way catalyst may be damaged.  
•
Never continue driving if the engine of your  
vehicle overheats. Doing so could cause a ve-  
hicle fire.  
•
DO NOT STOP THE ENGINE.  
Automatic transmission (AT) or continuously  
5. Open all windows.  
•
Never open the bonnet if steam is coming  
out.  
•
variable transmission (CVT) models cannot be  
started by pushing the vehicle. This may cause  
transmission damage.  
6. Switch off the air conditioner system (where fit-  
ted).  
Never remove engine coolant reservoir cap  
•
7. Set the heater or air conditioner temperature  
control to maximum “HOT” and fan speed con-  
trol to maximum speed.  
when the engine is hot. If the engine coolant  
reservoir cap is removed while the engine is  
hot, pressurised hot water will spurt out and  
possibly cause burning, scalding or serious  
injury.  
Never try to start the vehicle by towing it; when  
•
the engine starts, the forward surge could  
cause the vehicle to collide with the tow ve-  
hicle.  
8. Exit the vehicle.  
9. Visually inspect and listen for steam or coolant  
escaping from the radiator before opening the  
bonnet. Wait until no steam or coolant can be  
seen before proceeding.  
If steam or coolant is coming out of the en-  
gine, stand clear of the vehicle to prevent get-  
ting injured.  
•
The engine cooling fan will start whenever the  
coolant temperature exceeds preset degrees.  
•
10. Open the bonnet. For details, see “Bonnet  
release” in the “3. Pre-driving checks and  
adjustments” section.  
Be careful not to allow your hands, hair, jewel-  
lery or clothing to come into contact with, or  
get caught in, the cooling fan or drive belts.  
•
11. Visually check if the cooling fan is running.  
12. Visually check the radiator and radiator hoses  
for leakage.  
If the engine of your vehicle is overheating (indi-  
cated by the engine coolant temperature gauge) or  
if you feel a lack of engine power, detect unusual  
noise, etc., proceed as follows:  
WARNING  
If coolant is leaking, the cooling fan belt is  
missing or loose or the cooling fan is not run-  
ning, stop the engine.  
1. Move and park the vehicle safely off the road and  
away from traffic.  
2. Turn on the hazard warning flasher lights.  
3. Apply the handbrake.  
13. After the engine cools down, check the coolant  
level in the engine coolant reservoir with the  
engine running.  
6-12 In case of emergency  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals