2006-2014 Nissan Qashqai SUV Safety ? seats, seat belts and supplemental restraint system -> Seat belt maintenance User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety ? seats, seat belts and supplemental restraint system -> Seat belt maintenance for Your Nissan Qashqai SUV First Generation (2006-2014)

3rd row outer seat (7-seater)  
the centre of the shoulder. Release the adjustment  
button to lock the shoulder belt anchor into position.  
SEAT BELT MAINTENANCE  
a. Press the red button on the inner buckle j3 . The  
seat belt will automatically retract to the outer  
buckle with the black button j2 .  
To clean the seat belt webbing, apply a mild  
•
soap solution or any solution recommended for  
cleaning upholstery or carpets. Then brush it,  
wipe with a cloth and allow it to dry in the shade.  
Do not allow the seat belts to retract until they  
are completely dry.  
WARNING  
After adjustment, release the adjustment but-  
•
–
If desired, the 3rd row seatback can be folded  
flat for further information see “Folding 3rd  
row (7-seater)” earlier in this section.  
ton and check by moving the shoulder belt  
assembly up and down to make sure the  
shoulder belt anchor is securely fixed in posi-  
tion.  
If dirt builds up in the shoulder belt guide of  
•
b. Press the black button to release the end tongue.  
When the seat belt has retracted fully, place the  
end tongue onto stowage hook j1 . Move the  
tongue holder downwards if required.  
the seat belt anchors, the seat belts may retract  
slowly. Wipe the shoulder belt guide with a clean,  
dry cloth.  
The seat belt should be away from your face  
and neck, but not falling off your shoulder.  
•
Periodically check to see whether the seat  
Checking the seat belt operation  
•
belt and the metal components such as buck-  
les, tongues, retractors, flexible wires and an-  
chors work properly. If loose parts, deteriora-  
tion, cuts or other damage to the webbing is  
found, the entire belt assembly should be re-  
placed.  
Your seat belt retractors are designed to lock the  
belt movement in two separate situations:  
When the belt is pulled quickly from the retrac-  
tor.  
•
When the vehicle slows down rapidly.  
•
To increase your confidence in the belts, check the  
operation as follows:  
NPA816Z  
Take place in the seat for which you wish to check  
the belt operation. Grasp the shoulder belt and pull  
quickly forward. The retractor should lock and re-  
strict further belt movement.  
Shoulder belt height adjustment (front  
seats only)  
The shoulder belt anchor height should be adjusted  
to the position best for you (see “Precautions on  
seat belt usage” earlier in this section).  
If the retractor does not lock during these checks or  
if you have any questions about the seat belt opera-  
tion, see a NISSAN dealer or qualified workshop.  
To adjust, depress the adjustment button as illus-  
trated and move the shoulder belt anchor to the  
appropriate position, so that the belt passes over  
Safety — seats, seat belts and supplemental restraint system 1-11  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals