2006-2014 Nissan Qashqai SUV Safety ? seats, seat belts and supplemental restraint system -> Seat belts User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety ? seats, seat belts and supplemental restraint system -> Seat belts for Your Nissan Qashqai SUV First Generation (2006-2014)

SEAT BELTS  
ing its backward movement and by helping to ab-  
sorb some of the forces that may lead to whiplash  
type injuries.  
ACTIVE HEAD RESTRAINTS (front  
seats)  
Active head restraints are effective for collisions at  
low to medium speeds in which it is said that whip-  
lash injury occurs most.  
Active head restraints operate only in certain rear-  
end collisions. After the collision, the head restraints  
return to their original positions.  
NPA1051  
Properly adjust the active head restraints as de-  
scribed in the previous section.  
SPA1025Z  
WARNING  
7–seater: Seat belts for 3rd row seats are not  
part of the seat belt warning monitoring system.  
WARNING  
Always adjust the head restraints properly as  
specified in the previous section. Failure to do  
so can reduce the effectiveness of the active  
head restraint.  
•
•
•
SEAT BELT WARNINGS  
jA Driver and front passenger  
The seat belt warning lights, located in the instru-  
ment panel jA , will light up if the driver and/or front  
passenger seat belts have not been fastened. See  
“Warning/indicator lights and audible reminders” in  
the “2. Instruments and controls” section for further  
details.  
Active head restraints are designed to supple-  
ment other safety systems. Always wear seat  
belts. No system can prevent all injuries in an  
accident.  
Do not attach anything to the head restraint  
stalks. Doing so could impair the active head  
restraint’s function.  
jB Rear passengers  
The rear passenger seat belt warning is shown in  
the vehicle information display jB . See “Vehicle in-  
formation display” in the “2. Instruments and  
controls” section.  
The head restraint moves forward utilising the force  
that the seatback receives from the occupant in a  
rear-end collision. The movement of the head re-  
straint helps support the occupant’s head by reduc-  
The seat belt warning alerts the driver and/or front  
passenger if a (rear) seat belt is not securely fas-  
1-6 Safety — seats, seat belts and supplemental restraint system  
Downloaded from manuals search engine  
tened. The seat belt warning shows a filled circle  
when the ignition switch is turned to the ON position  
and an empty circle when the related seat belt has  
been securely fastened, or after approximately 35  
seconds after engine start, or when acknowledged  
by the driver pushing the steering wheel switch ji  
(where fitted).  
PRECAUTIONS ON SEAT BELT  
USAGE  
WARNING  
Be sure to observe the following warnings when  
using seat belts. Failure to do so could increase  
the chance and/or severity of injury in an acci-  
dent.  
Seat belts are designed to bear upon the bony  
•
NOTE  
structure of the body, and should be worn low  
across the front of the pelvis or the pelvis,  
chest and shoulders, as applicable; wearing  
the lap section of the belt across the abdomi-  
nal area must be avoided.  
If there is a change in (2nd row) rear seat belt  
•
status during a journey then the applicable  
symbol for any unbuckled seat will show again  
for a further 35 seconds.  
SSS0136Z  
Sit upright and well back  
No modifications or additions should be made  
•
The front passenger seat belt warning light  
will not illuminate if the seat is unoccupied.  
•
by the user which will either prevent the seat  
belt adjusting devices from operating to re-  
move slack, or prevent the seat belt assembly  
from being adjusted to remove slack.  
Seat belts for 3rd row seats (where fitted) are  
not part of the seat belt warning monitoring  
system.  
•
Seat belts should be adjusted as firmly as  
•
possible, consistent with comfort to provide  
the protection for which they have been de-  
signed. A slack belt will greatly reduce the  
protection afforded to the wearer.  
SSS0134Z  
Care should be taken to avoid contamination  
•
of the webbing with polishes, oils and chemi-  
cals, and particularly battery acid. Cleaning  
may safely be carried out using mild soap and  
water. The belt should be replaced if webbing  
becomes frayed, contaminated or damaged.  
Sit upright and well back  
Your chances of being injured in an accident and/or  
the severity of injury may be greatly reduced if you  
are wearing your seat belt and it is properly ad-  
justed. NISSAN strongly encourages you and all of  
your passengers to buckle up every time you drive,  
even if your seating position is equipped with an air  
bag.  
It is essential to replace the entire assembly  
after it has been worn in a severe impact even  
if damage to the assembly is not obvious.  
•
Safety — seats, seat belts and supplemental restraint system 1-7  
Downloaded from manuals search engine  
Belts should not be worn with straps twisted.  
function in the system. Have the system  
checked by a NISSAN dealer or qualified  
workshop.  
•
•
Children  
Each belt assembly must only be used by one  
occupant; it is dangerous to put a belt around  
a child being carried on the occupant’s lap.  
Children who are too large for child restraints should  
be seated and restrained by the seat belts that are  
provided.  
Always route the shoulder belt over your  
shoulder and across your chest. Never run  
the belt under your arm. Serious injury can  
occur if the seat belt is not worn properly.  
•
•
Every occupant in this vehicle should wear a  
seat belt at all times.  
•
•
•
The use of a booster seat (commercially available)  
may help to avoid the shoulder belt coming across  
the face or neck area of a child’s seating position.  
The booster seat should raise the child so that the  
shoulder belt is properly positioned across the top,  
middle portion of the shoulder and the lap belt is low  
on the hips. The booster seat should fit the vehicle’s  
seat. Once the child has grown so the shoulder belt  
is no longer on or near the face and neck, use the  
shoulder belt without the booster seat.  
Never carry more people in the vehicle than  
there are seat belts.  
Position the lap belt as low as possible  
AROUND THE HIPS, NOT THE WAIST.  
All seat belt assemblies, including retractors  
and attaching hardware, should be inspected  
by a NISSAN dealer or qualified workshop af-  
ter any collision. NISSAN recommends that  
all seat belt assemblies in use during a colli-  
sion should be replaced unless the collision  
was minor and the belts show no damage and  
continue to operate properly. Seat belt assem-  
blies not in use during a collision should also  
be inspected and replaced if either damage  
or improper operation is noted.  
CHILD SAFETY  
WARNING  
Never let a child stand or kneel on any seat and  
do not allow a child in the cargo areas while the  
vehicle is moving.  
SSS0099Z  
PREGNANT WOMEN  
Once the pre-tensioner seat belt has been ac-  
tivated, it cannot be re-used. It must be re-  
placed together with the retractor. See a  
NISSAN dealer or qualified workshop.  
•
•
•
NISSAN recommends that pregnant women use  
seat belts. Contact your doctor for specific recom-  
mendations. The seat belt should be worn snug,  
always position the lap belt as low as possible  
around the hips, place the shoulder belt over your  
shoulder and across your chest. Never run the lap/  
shoulder belt over your abdominal area.  
Infants or small children  
NISSAN recommends that infants or small children  
should be seated in a child restraint on the rear  
seats if available. According to accident statistics,  
children are safer when properly restrained in the  
rear seat than in the front seat. See “Child restraints”  
later in this section. You should choose a child re-  
straint system which fits your vehicle and always fol-  
low the manufacturer’s instructions for installation  
and use.  
Removal and installation of the pre-tensioner  
seat belt system components should be done  
by a NISSAN dealer or qualified workshop  
ONLY.  
If the seat belt warning light glows continu-  
ously while the ignition switch is in the ON  
position, all doors are closed and occupied  
seat belts are fastened, it may indicate a mal-  
1-8 Safety — seats, seat belts and supplemental restraint system  
Downloaded from manuals search engine  
CAUTION  
INJURED PERSONS  
The seat belt retractor is designed to lock dur-  
ing a sudden impact. A slow pulling motion  
will permit the belt to move and allow you  
some freedom of movement in the seat.  
NISSAN recommends that injured persons use seat  
belts, depending on the injury. Check with your doc-  
tor for specific recommendations.  
THREE-POINT TYPE SEAT BELTS  
Every person who drives or rides in this vehicle  
should wear a seat belt at all times.  
Fastening the seat belts  
NPA966  
2nd row rear centre (7-seater)  
1. Adjust the seat.  
2nd row centre seat (7-seater)  
WARNING  
a. Unclip the seat belt buckles from the (magnetic)  
The seatback should not be reclined any more  
than needed for comfort. Seat belts are most  
effective when the passenger sits well back  
and upright in the seat. If the seat is reclined,  
the risk of sliding under the lap belt and being  
injured is increased.  
ceiling stowage point j1 .  
NPA827Z  
b. Slowly pull the seat belt out of the ceiling retrac-  
tor and pass the buckles through the comfort  
loop j2 .  
2nd row centre seat (5-seater)  
2nd row centre seat (5-seater)  
a. Unclip the seat belt buckles from the ceiling  
stowage point.  
c. Insert the end tongue into the buckle with the  
black button j3 until it clicks.  
b. Slowly pull the seat belt out of the ceiling retrac-  
tor and insert the end tongue into the buckle with  
the black button j1 until it clicks.  
d. Pull the second tongue and insert it into the  
buckle with the red button j4 until it clicks.  
c. Pull the tongue and insert it into the buckle j2  
until it clicks.  
SSS0292Z  
2. Slowly pull the seat belt out of the retractor and  
insert the tongue into the buckle until it clicks.  
Safety — seats, seat belts and supplemental restraint system 1-9  
Downloaded from manuals search engine  
Unfastening the seat belts  
WARNING  
Make sure, when releasing the centre seat belt  
from the 2nd row, that the seat belt tongues do  
not come into contact with any occupants on the  
3rd row.  
To unfasten the seat belt, press the button on the  
buckle. The seat belt will automatically retract.  
NPA972  
SSS0467Z  
3rd row rear (7-seater)  
2nd row centre seat (5-seater)  
Rear centre seat:  
3rd row outer seat (7-seater)  
3. Position the lap belt portion low on the hips as  
shown.  
a. Unclip the end tongue from stowage hook on the  
a. Press the red button on the inner buckle j2 . The  
seat belt will automatically retract to the outer  
buckle with the black button j1 .  
side trim j1 .  
4. Pull the shoulder belt portion towards the retrac-  
tor to take up extra slack. Make sure the shoul-  
der belt is routed over your shoulder and snug  
across your chest.  
b. Insert the end tongue into the buckle with the  
black button until it clicks j2 .  
b. To fully stow the seat belt, press the black but-  
ton on the outer buckle j1 . The seat belt will  
retract fully.  
c. Pull the second tongue and insert it into the  
buckle with the red button j3 until it clicks. The  
tongue holder can be slid to a preferred position  
on the webbing for easy access the next time the  
seat belt is used.  
WARNING  
c. Stow the seat belt buckles in the ceiling stowage  
point.  
The seat belt should rest on the middle of  
the shoulder. It must not rest against the  
neck.  
•
2nd row centre seat (7-seater)  
a. Press the red button on the inner buckle j4 . The  
seat belt will automatically retract to the outer  
buckle with the black button j3 .  
Make sure that the seat belt is not twisted  
in any way.  
•
b. While holding the seat belt, press the black but-  
ton on the outer buckle j3 . The seat belt will  
retract fully.  
c. Stow the seat belt buckles in the ceiling stowage  
point.  
1-10 Safety — seats, seat belts and supplemental restraint system  
Downloaded from manuals search engine  
3rd row outer seat (7-seater)  
the centre of the shoulder. Release the adjustment  
button to lock the shoulder belt anchor into position.  
SEAT BELT MAINTENANCE  
a. Press the red button on the inner buckle j3 . The  
seat belt will automatically retract to the outer  
buckle with the black button j2 .  
To clean the seat belt webbing, apply a mild  
•
soap solution or any solution recommended for  
cleaning upholstery or carpets. Then brush it,  
wipe with a cloth and allow it to dry in the shade.  
Do not allow the seat belts to retract until they  
are completely dry.  
WARNING  
After adjustment, release the adjustment but-  
•
–
If desired, the 3rd row seatback can be folded  
flat for further information see “Folding 3rd  
row (7-seater)” earlier in this section.  
ton and check by moving the shoulder belt  
assembly up and down to make sure the  
shoulder belt anchor is securely fixed in posi-  
tion.  
If dirt builds up in the shoulder belt guide of  
•
b. Press the black button to release the end tongue.  
When the seat belt has retracted fully, place the  
end tongue onto stowage hook j1 . Move the  
tongue holder downwards if required.  
the seat belt anchors, the seat belts may retract  
slowly. Wipe the shoulder belt guide with a clean,  
dry cloth.  
The seat belt should be away from your face  
and neck, but not falling off your shoulder.  
•
Periodically check to see whether the seat  
Checking the seat belt operation  
•
belt and the metal components such as buck-  
les, tongues, retractors, flexible wires and an-  
chors work properly. If loose parts, deteriora-  
tion, cuts or other damage to the webbing is  
found, the entire belt assembly should be re-  
placed.  
Your seat belt retractors are designed to lock the  
belt movement in two separate situations:  
When the belt is pulled quickly from the retrac-  
tor.  
•
When the vehicle slows down rapidly.  
•
To increase your confidence in the belts, check the  
operation as follows:  
NPA816Z  
Take place in the seat for which you wish to check  
the belt operation. Grasp the shoulder belt and pull  
quickly forward. The retractor should lock and re-  
strict further belt movement.  
Shoulder belt height adjustment (front  
seats only)  
The shoulder belt anchor height should be adjusted  
to the position best for you (see “Precautions on  
seat belt usage” earlier in this section).  
If the retractor does not lock during these checks or  
if you have any questions about the seat belt opera-  
tion, see a NISSAN dealer or qualified workshop.  
To adjust, depress the adjustment button as illus-  
trated and move the shoulder belt anchor to the  
appropriate position, so that the belt passes over  
Safety — seats, seat belts and supplemental restraint system 1-11  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals