Passenger side power window switch
The passenger side switch will open or close
only the corresponding window. To open or
close the window, hold the switch down or up.
Locking passenger’s windows
When the lock button is pushed in, only the
driver side window can be opened or closed.
Push it in again to cancel.
Automatic operation (For driver’s
window)
To fully open or close the driver’s window,
completely push down or pull up the switch and
release it; it need not be held. The window will
automatically open or close all the way. To stop
the window, just press or lift the switch on the
opposite side.
Auto reverse function
If the control unit detects something caught in
the driver’s window as it moves up, the window
will be immediately lowered.
The auto reverse function can be activated when
the driver’s window is closed by automatic op-
eration when the ignition key is in the ON
position.
Depending on the environment or driving
conditions, the auto reverse function may
be activated if an impact or load similar to
something being caught in the window
occurs.
WARNING
There are some small distances imme-
diately before the closed position which
cannot be detected. Make sure that all
passengers have their hands, etc., in-
side the vehicle before closing the win-
dow.
SIC0627B SIC0932
Instruments and controls 2-33
墌 04.6.10/T30-J/V5.0 墍
English 
