2000-2006 Nissan X Trail SUV Instruments and controls -> SNOW MODE SWITCH (if so equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> SNOW MODE SWITCH (if so equipped) for Your Nissan X Trail SUV First Generation (2000-2006)

damage to the heater.
쐌 Any liquid spilled on the heated seat
should be removed immediately with
a dry cloth.
쐌 When cleaning the seat, never use
gasoline, thinner, or any similar ma-
terials.
쐌 If any abnormalities are found or the
heated seat does not operate, turn
the switch off and have the system
checked by your NISSAN dealer.
For driving or starting the vehicle on snowy
roads or slippery areas, push the SNOW mode
switch and indicator light on the switch will
illuminate. When the SNOW mode is activated,
engine output is controlled to avoid wheel spin.
The vehicle should be driven with the Vehicle
Dynamic Control (VDC) System ON for most
driving conditions.
When the vehicle is stuck in mud or snow, the
VDC system reduces the engine output to re-
duce wheel spin. The engine speed will be
reduced even if the accelerator is depressed to
the floor. If maximum engine power is needed to
free a stuck vehicle, turn the VDC system off.
To cancel the Vehicle Dynamic Control (VDC)
System, push the VDC OFF switch to turn off
the system. The
indicator light will come
on.
Push the VDC OFF switch again or restart the
SAA0844 SIC1881
SNOW MODE SWITCH (if so
equipped)
VEHICLE DYNAMIC CONTROL
(VDC) OFF SWITCH (if so
equipped)
Instruments and controls 2-21
墌 04.6.10/T30-J/V5.0 墍

Related Topics

Popular Owner Manuals