PRACTICAL INFORMATION
turn the screw a quarter of a turn to
the left,
unclip the fuse box cover by pulling
at the top right,
remove the cover completely,
remove the pliers.
CHANGING A FUSE
Procedure for replacing a faulty fuse
with a new fuse to rectify a failure of the
corresponding function.
i
Installing electrical accessories
Your vehicle's electrical system is
designed to operate with standard
or optional equipment.
Before installing other electrical
equipment or accessories on your
vehicle, contact a PEUGEOT dealer.
Changing a fuse
Before changing a fuse, the cause of
the failure must be identified and recti-
fied.
Identify the faulty fuse by checking
the condition of its filament.
!
PEUGEOT will not accept responsi-
bility for the cost incurred in repairing
yourvehicleorforrectifyingmalfunc-
tions resulting from the installation
of accessories not supplied and not
recommended by PEUGEOT and
not installed in accordance with its
instructions, in particular when the
combined consumption of all of the
additional equipment connected ex-
ceeds 10 milliamperes.
Access to the tools
The extraction pliers and the spare fus-
es are installed on the back of the fascia
fuse box cover.
Correct
Incorrect
To gain access to them:
open the glove box lid,
push the opening guide to the left to
open to beyond the first notch,
open the glove box lid fully,
Use the special pliers to extract the
fuse from its housing.
Always replace the faulty fuse with a
fuse of the same rating.
Check the correspondence between
the number etched on the box, the
rating etched on the fuse and the
tables below.
175
English 